Wilks USA TX750 Pressure washer unboxing and Assembly plus first start
Вставка
- Опубліковано 30 вер 2024
- In this video, I unbox my new Wilks USA TX750 pressure washer, put it together and give it a quick test run. This is my first video of this type and I would appreciate any feed back :)
Excellent informative and very well explained, Helped me understand and work my machine so thank you very much.. Keep up the great work mate 👍🏻
Great video, told me everything I needed to know about this machine.
I actually bought one on of these pressure washers on the strength of the content in your video- it’s brilliant I’m very happy with it, getting it fired up has a knack but once it’s running and warmed up it’s excellent.
100% better than electric- for those who are interested the engine is a Honda GX200 clone so is infinitely repairable, parts are easily obtained and abundant, plus you can buy an electric start upgrade kit if you really want.
Had my 750i for 4yrs. The 1st engine seized after 4 uses but got a new one shipped free of charge.
The fuel tank cap constantly leaks, so never fill it up or transport it in your van/car with petrol in.
Uses oil fast and goes black after 20hrs of use so change your oil regularly.
The Lance fittings are crap. No matter how tight you tighten them, they leak ( yes, I've also tried ptf on everything but alwaysleaks )
The plastic wheels broke so had to get none original hard rubber ones.
The instruction manual is next to useless.
When you pull the pullcord, even with no pressure, after 3 pulls, the recoil rips your hand off.
Change the male plastic hose fitting for a metal one as mine snapped off.
All of these problems but the pressure power is great and cleans better than any electric washer I've used in the past.
Yea ive got an issue with mine not unloading properly when you release the trigger on the lance, there's always loads of resistance trying to start, I've taken the unloader valve out and cleaned it, not sure what else to do.
Very good petrol washer I have one
Just can't beat letting the neighbours know you're awake on a Sunday morning 😂😂😂😂
No louder than a petrol lawn mower.
Mine keeps cutting out and the reel is a bitch the reel up
Great machine i like that you can use it from a barrel of water
you might want to put ptfe tape every joint to start with no quality engineering here.
An excellent video, very informative and easy to follow.... well done and many thanks.
Thanks for your kind comment, this means a lot 🙂
@@KernowGarage how much decibel it produces and is it louder than a petrol generator
@@danteerskine7678 hi, I'd say it's about as loud as a petrol generator
@@KernowGarage I think that in terms of loudness, overhead valves engines are a bit quieter than a flathead 4 stroke petrol engine. I own a flathead gasoline water pump and that thing is so noisy that I stopped using it. It annoys the hell out of me
Do you still rate it a year later bud? I'm after one for work
I've just got one of these there really powerful I just dnt no how to work the detergent in the front were it goes anyone no
I'm pretty sure these are sold as a JetUSA brand in Australia, looks identical in design and even colour (I found this video looking for a seal for mine), if the hose is connected to the top of the pump and the bottle, mine drawers the detergent when using the 60 degree tip on the lance but not smaller ones, try that.
Does yours overheat or cut out after an hour of use?
no I haven't had this issue, are you using the correct oil grade?
Can you make a video of the detergent function.
Hi, thanks for your comment. I don't use the detergent function on this machine because I use it for cleaning cars.
did you get a turbo nozzie with it
Hi, you don't get one with it but it is a standard 1/4" quick release fitting so it should be easy to find one, just make sure it is rated for the pressure the machine operates at
Did you solve the leaking inlet?
Cheers
yes I did, i purchased a better hose attachment as the one supplied with the machine was very cheap quality.
@@KernowGarage what hose attatchment did you go for please?
Can u get a turbo nozzle to use on block paving
Hi, yes you can get one it's a standard 1/4" quick release fitment, you'll want to make sure the nozzle you buy will be able to take the pressure the machine works at though or it won't last very long.
@@KernowGarage thanks mate I need somone thing for my garden as have a lot of paving and going to cost like 400 for a perfessional anyway so pays for itself
Get a funel
Or an additional 'n' 🤣
Cheers for this video. It helped me with my decision to buy one today.
Hi, thanks for the video. I’ve been wanting to buy this one for months but as you said there is mixed reviews.
How is it with the most powerful nozzle?
Thanks.
Carl.
Hi Carl,
So far I've put about 8 hours into this machine, its had its first run in oil change and so far its been faultless. The only issue I've had is the fuel cap can be a bit leaky, but if you take the strainer out that sits under it that seems to help, also not filling the tank all the way to the top helps.
I found that with the most powerful nozzle it will shift just about anything, its a very powerful machine :)
Kind regards,
Jake
@@KernowGarage that’s great thanks jake. Would you know if it’s powerful enough to run a flat surface cleaner??
@@grumpydad23 I haven't tried one of those yet, but provided it fits on the 1/4" quick release I should think it would be powerful enough
@@KernowGarage hi pal hope your well I put 10/30 oil in the pump is that ok has I know you definitely put it in the engine part where you have the screw in with the measurement rod on it I’m ok with that I’ve got a wilks TX 850 4800psi very powerful just that when I got through to someone at wilks they told me to put that oil in and I said are you sure and they said yes so that’s what I did I’ve had it a year now and it’s done plenty off work and still going well now and I got a turbo nossle with it is their anymore on the market to suit that kind off power for that machine please. Thanks 👍