Hey thanks for stopping by my UA-cam channel and I am glad that I could help you out.. please consider hitting the subscribe button... You can also check out my blr tuning Facebook page that's my business page.. m.facebook.com/BLRTUNING/
The wrap you see on my bike is from AMR racing they are the best in the business when it comes to vinyl wrap.. their stuff is put on using a wet application and once dried it is super sticky you would have to peel it off by hand in order to get it off and it will not leave any residue behind when you peel it off even after a couple years.. so far is holding up really good. I would highly recommend you go through AMR racing to make your purchase on a vinyl wrap if you call them you can talk to them about only wrapping certain parts of the bike.. if you use my code at checkout you will save 15% as well.. code is BLUEDRAGON all capital letters all one word. There's a lot of cheap vinyl wraps going around right now that are very thin film and do not stick well to plastic. You cannot use a vinyl wrap that is designed for the metal on a car it will not stick to the plastic it will probably fall off when you're going down the freeway... Vinyl wrap that AMR racing uses is their own brand that they have custom made designed to stick to plastic it's used on off-road vehicles and watercraft and everything
Quick question. What's the difference between these on amr site and the ones on Amazon sold buy whole sale decals? Some of the graphics are exactly the same(they even have the one you're using) but cheaper. Thanks for any feed back.
AMR racing has their own decal brand... They don't use 3M backing or another brand... You have to watch out for the ones that have copied their design.. there's a lot of fake ones out there that have a much cheaper sticky backing... if it doesn't say that it's sold by AMR racing I would contact AMR racing and ask them if it is a certified dealer of their product... After seeing the difference between other brands,,, copycats ,, and amr racing I would not go with another brand ever...
Looks good man. Have you had any luck with the dynojet yet? I bought one a while back but have yet to install because of issues you talked about. Have you and dynojet figured the bugs out yet?
Yes all the bugs are worked out I have an installation video on my UA-cam channel.. you do not have to keep it mounted to the bike you can plug it in flash a tune over to it once it is done flashing shut the bike off and unplug the pv3.. the bike is now tuned. I offer custom tuning if you get a hold of me on Facebook messenger I'm sure we can work something out. Just let me know who you are from UA-cam. My name on Facebook is the same as UA-cam.. Bill Ramseyer JR
Hey Bill, new sub here..may I ask you how to lift my new Ryker 900 Ace to adjust the preload on the rear shock...not sure where the lift points are..thanks for any info
If you search my channel for the video where I show how to install the Elka stage 5 rear shock I show different points that you can raise the bike up that way just make sure you're using a rag underneath your jack and you can raise it up anywhere on the metal frame
@@dannywilliams2989 I think I understand what you're saying but the way mine is put together is the way that the dealership put it together I've never actually tried putting it on there a different way. If you could look me up on Facebook BILL RAMSEYER JR SEND ME A PICTURE THROUGH FACEBOOK that would be greatly appreciated
Hey I see what you're talkin about you're right in the video I had them sitting up there like that... I went out to look at the bike I have them on there correctly.. I went through the video footage and yes you are 100% correct they were on their wrong in the video.. the blue plastic panels go over the top of the black part of the glove box.. thanks for the heads up had me second-guessing myself went out to the garage to confirm that I have them on their correct.. good looking out have a good day buddy thanks for stopping by the UA-cam channel and checking it out
Nice work done to your bike, but sorry I’m not incline to do that nice job😂 I would have to pay someone to do that kind of job which I will be having mines done real soon but will pay someone to do it.
While I do agree with you,,,, swing arm gets pretty hot do to it housing the drive shaft.. I'm not sure how well the vinyl kit would stick to the swingarm...
It is advertised in the video and there is a link in the description below the video... It's from a company called AMR racing it's their own brand of vinyl wrap custom made for them..
They do custom work as well so contact AMR racing don't just assume they don't have what you're looking for... They are very good at making things happen.. I do believe that the pink in this design is part of the actual design worknot sure if it can be changed or not but it would not hurt to contact them and ask them what they can do and what they cannot do.. 702-312-2217 AMRRACING That's their phone number give them a call... Don't forget you can use my code at checkout and save 15% off of your order tell them Bill sent you.. Code: BLUEDRAGON
I will be doing some more videos on it soon.... I did do an unboxing video... The pv3 from Dynojet for the Can-Am Ryker 900 lets you flash tune the ECU. Dynojet has a tune you can download for stock exhaust stock intake. I Offer tuning and custom map making for it as well. If you have more questions please look me up on Facebook BILL RAMSEYER JR Here's the link to my unboxing video. ua-cam.com/video/zBPFjj4B-RE/v-deo.html
This is the best wrap I’ve seen
WWW.AMRRACING.COM has the best vinyl wraps that you can buy.
You’ve given me some confidence! I believe I’m gonna try to install mine!!!!
You got this
I just finished my wrap install today. Took me all day but you saved me allot of time. This is a great video. So thank you.
Hey thanks for stopping by my UA-cam channel and I am glad that I could help you out.. please consider hitting the subscribe button...
You can also check out my blr tuning Facebook page that's my business page..
m.facebook.com/BLRTUNING/
Sweet bro, this gave me the courage to go head and do mines, great video!!!
The nicest wrap I've seen so far great job my friend see u out on the road drive safe
Thank you
I just subscribed to your channel. You do good work. Thanks
Thank you I really appreciate that
My wraps on the way! Can't wait
Thank you so much I have the same wrapper and I followed you doing this
Great video as always! That wrap looks sweet on your Ryker. Keep up the great work!
Thanks
Looks badass Bill!
Thanks bill awesome video
Bill, I am doing a 1/2 wrap, but worried how it will hold up or stay on all that plastic. How did yours old up?
The wrap you see on my bike is from AMR racing they are the best in the business when it comes to vinyl wrap.. their stuff is put on using a wet application and once dried it is super sticky you would have to peel it off by hand in order to get it off and it will not leave any residue behind when you peel it off even after a couple years.. so far is holding up really good. I would highly recommend you go through AMR racing to make your purchase on a vinyl wrap if you call them you can talk to them about only wrapping certain parts of the bike.. if you use my code at checkout you will save 15% as well.. code is BLUEDRAGON all capital letters all one word. There's a lot of cheap vinyl wraps going around right now that are very thin film and do not stick well to plastic. You cannot use a vinyl wrap that is designed for the metal on a car it will not stick to the plastic it will probably fall off when you're going down the freeway... Vinyl wrap that AMR racing uses is their own brand that they have custom made designed to stick to plastic it's used on off-road vehicles and watercraft and everything
Hello Bill, thank you for the radiator grill and this video, I have one question did you have to take off the reflectors lights as well?
Only on the back of the fenders... We already had new ones to use
Whoa! Looks killer man! Great job.
Thanks bro
Quick question. What's the difference between these on amr site and the ones on Amazon sold buy whole sale decals? Some of the graphics are exactly the same(they even have the one you're using) but cheaper. Thanks for any feed back.
AMR racing has their own decal brand... They don't use 3M backing or another brand... You have to watch out for the ones that have copied their design.. there's a lot of fake ones out there that have a much cheaper sticky backing... if it doesn't say that it's sold by AMR racing I would contact AMR racing and ask them if it is a certified dealer of their product... After seeing the difference between other brands,,, copycats ,, and amr racing I would not go with another brand ever...
@@BLRTUNING yea I'm also noticing how dull most look compared to the vibrancy of yours. Think I'll order amr site. Thanks.
Looks good man. Have you had any luck with the dynojet yet? I bought one a while back but have yet to install because of issues you talked about. Have you and dynojet figured the bugs out yet?
Yes all the bugs are worked out I have an installation video on my UA-cam channel.. you do not have to keep it mounted to the bike you can plug it in flash a tune over to it once it is done flashing shut the bike off and unplug the pv3.. the bike is now tuned. I offer custom tuning if you get a hold of me on Facebook messenger I'm sure we can work something out. Just let me know who you are from UA-cam. My name on Facebook is the same as UA-cam.. Bill Ramseyer JR
GREAT job! So informative, looks like I've got my work cut out for me!
Hey Bill, new sub here..may I ask you how to lift my new Ryker 900 Ace to adjust the preload on the rear shock...not sure where the lift points are..thanks for any info
If you search my channel for the video where I show how to install the Elka stage 5 rear shock I show different points that you can raise the bike up that way just make sure you're using a rag underneath your jack and you can raise it up anywhere on the metal frame
Nice work, just FYI, your frunk goes under the plastic side pieces. That’s why you have a gap looking at your frunk from the side.
Not sure exactly what you mean
BiLL Ramseyer when you put the side pieces back on, they should cover the sides of the front trunk(frunk)
If I wasn’t at work I would get a pic of mine. The piece over the headlight is the same height as the frunk cover. No gap
@@dannywilliams2989 I think I understand what you're saying but the way mine is put together is the way that the dealership put it together I've never actually tried putting it on there a different way. If you could look me up on Facebook BILL RAMSEYER JR SEND ME A PICTURE THROUGH FACEBOOK that would be greatly appreciated
Hey I see what you're talkin about you're right in the video I had them sitting up there like that... I went out to look at the bike I have them on there correctly.. I went through the video footage and yes you are 100% correct they were on their wrong in the video.. the blue plastic panels go over the top of the black part of the glove box.. thanks for the heads up had me second-guessing myself went out to the garage to confirm that I have them on their correct.. good looking out have a good day buddy thanks for stopping by the UA-cam channel and checking it out
Great video, very helpful... can you tell me where you got the drink holder including the bottle?
The drink holders from a company called Providence Spyder and motorcycle accessories.. I have a complete video on it on my UA-cam channel
The water bottle was purchased separately at Walmart for like $3
Great Video :-)
That is alot of work my friend
Nice work done to your bike, but sorry I’m not incline to do that nice job😂 I would have to pay someone to do that kind of job which I will be having mines done real soon but will pay someone to do it.
After a year how well is your wrap holding up? I'm about to buy a full body wrap
Not a scratch on it and not a corner filling up looks like its brand new still
Soooooooo much chatter.
Can you tell me what watch you are wearing in the video
Looking good buddy
There's no wrap for the swing are and the tail end for that price I feel like they should at least do the hole bike
While I do agree with you,,,, swing arm gets pretty hot do to it housing the drive shaft.. I'm not sure how well the vinyl kit would stick to the swingarm...
Have you done this before
Yes... Lots of times
What brand is the vinyl? I tried wrapping mine and it won't stick
It is advertised in the video and there is a link in the description below the video... It's from a company called AMR racing it's their own brand of vinyl wrap custom made for them..
Dam that’s cold
WOW!!!!!!!!!!!!!
That is a very thirsty wrap. Lol
Wish they made it without pink in it
They do custom work as well so contact AMR racing don't just assume they don't have what you're looking for... They are very good at making things happen.. I do believe that the pink in this design is part of the actual design worknot sure if it can be changed or not but it would not hurt to contact them and ask them what they can do and what they cannot do..
702-312-2217
AMRRACING
That's their phone number give them a call...
Don't forget you can use my code at checkout and save 15% off of your order tell them Bill sent you..
Code: BLUEDRAGON
How do the shrouds come off
Which shrouds are you talking about
@@BLRTUNING the air intakes
If you talking about the air scoops on both sides they are both just clipped on
Nice!!
Can you do a review on the dynojet flash
I will be doing some more videos on it soon....
I did do an unboxing video... The pv3 from Dynojet for the Can-Am Ryker 900 lets you flash tune the ECU. Dynojet has a tune you can download for stock exhaust stock intake. I Offer tuning and custom map making for it as well. If you have more questions please look me up on Facebook BILL RAMSEYER JR
Here's the link to my unboxing video.
ua-cam.com/video/zBPFjj4B-RE/v-deo.html
@@BLRTUNING Thanks for your response
Their website only showed one kit.
When you're looking at that one kit you have to scroll down...
Great job 👍
?????????😮😮😮😮😮😮
What's your question how can I help you
Now you can sell it for half price !! Looks like a stuffed animal. 😂