Very handy video! I noticed you had to use quite a bit of force to prise the shell open. There's a shallow slot adjacent to the emergency key holder which can accept a flat screwdriver blade. If you insert a wide enough screwdriver and turn anticlockwise gently, the case starts to come apart easily and then you can work the blade around to complete the separation like you showed - no force necessary.
You can also use the very tip of the emergency key itself to open it, just apply a bit of extra pressure both up and towards the body and the whole thing will instantly open.
Holy nuggets! I had a way too small screw driver handy. I tried your method without any hope of actually succeeding, but it worked perfectly first try! My screw driver is about half the width of the slot, but it worked! Almost no force needed!
как достанете железный ключ ( на задней части зажать ползунок и вытащить ключ) Откладываете его. Далее плоской отверткой ищем рядом с образовавшимся проемом место ( оно как будто само отвертку просит ) , вставляете туда чуть чуть (больше чем чуть не получится оно 1-2 мм глубиной) провернув и все вуаля , не надо ничего царапать и тд , меняете батарейку на CR 2032 плюсом вниз ( красивой стороной с надписью) ( и защелкиваете брелок обратно. далее по накатанной вставляете сам ключ в брелок. =)
Very handy video! I noticed you had to use quite a bit of force to prise the shell open. There's a shallow slot adjacent to the emergency key holder which can accept a flat screwdriver blade. If you insert a wide enough screwdriver and turn anticlockwise gently, the case starts to come apart easily and then you can work the blade around to complete the separation like you showed - no force necessary.
Thanks mate, your method is better
You can also use the very tip of the emergency key itself to open it, just apply a bit of extra pressure both up and towards the body and the whole thing will instantly open.
Holy nuggets! I had a way too small screw driver handy. I tried your method without any hope of actually succeeding, but it worked perfectly first try! My screw driver is about half the width of the slot, but it worked! Almost no force needed!
thank you so much, you just saved me 50 euro at the dealership
Works like a charm, thank you
Thank you!! Vere helpfull 😊
Thank you so much
Many thanks.
Thanks mate
Thank you! Very much appreciated!
Thank you ❤
как достанете железный ключ ( на задней части зажать ползунок и вытащить ключ) Откладываете его. Далее плоской отверткой ищем рядом с образовавшимся проемом место ( оно как будто само отвертку просит ) , вставляете туда чуть чуть (больше чем чуть не получится оно 1-2 мм глубиной) провернув и все вуаля , не надо ничего царапать и тд , меняете батарейку на CR 2032 плюсом вниз ( красивой стороной с надписью) ( и защелкиваете брелок обратно. далее по накатанной вставляете сам ключ в брелок. =)
Thank you! Why did they make it so difficult to change batteries….
do you need to pair the key again after battery replacement ?
No
The key works too. Dont need any other tools to pry it open
wrecked my key
This is wrong and damages your key. Use your key in the slot inside.