i know i'm late to this video but wanted people to know is that the inner door does pop right out. after removing the two screws that hold it shut, open it slightly and pull towards the back of the case and it will just pop off the hinges, reverse to re install. makes ones build in the case much easier
@@abisography i love it! built like a tank. with my motherboard, had more than enough room to set my 360 AIO up with push/pull fans.my one gripe is that the built-in rgb isn't compatible with my motherboards argb out (ASUS )
I personally prefer the function of the mesh front as intake, but I have to admit the all glass setup does look the most striking. Very nice video, I subbed.
A couple of AX fans on the front would have been better than the inverted RX, but I have to say this case is fantastic and on my radar for an upgrade to my current Be Quiet 801.
I've built in this case a few times and they make reverse fans if you want to hide the fan bracing on those front fans. My only issue I am having on my 3rd build with this case is the preprogrammed rgb settings with the button does not stay set and reverts back to the default bluish white every time it hibernates or powers off. Working with Montech now about this issue, but still one of my favorite cases to build in and customers seem to really like it.
Mine did not have that problem. But I did not like the options, so I went for SignalRGB ( Free version) If you hold the button for the RGB a few sec, then it will be free of the pre settings and SignalRGB can take it from there.
@@JanFarang Yep, I've used Signal before to solve the same problems. I could have had a bad controller and it is not uncommon; I have two new/warranty controllers coming from Phanteks for two NV7 builds i am doing (12 fans...most I've installed on a case); so it is taxing the amps/watts/LED #s on the controller. Also if there is enough argb headers you can just plug everything into the mobo and use the manufacturers software (ASUS, Gigabyte, MSI). Also Razer Chroma is aweseome, however if you have too many fans for the controller you cannot sync up multiple controls (that I know of); but the day they figure that out, it will be my first choice as a builder. And the fact they are still using molex seems outdated.
@@garyc5245 I have a asus mobo, and went with that software ( forgot the name) that they have for controlling the RGB and so on. I and many others hated it, very heavy, and a lot of crap. When you google it, only complains and not without reason. Asus makes fine mobo's but that software is terrible. SignalRGB will take some time to config, and you have to look out for conflicting software like Icue... It does it all, mouse, keyboard, pc... love it, even the free version. The king 95 is a great case, but the RGB right out of the box, is not enough, it needs something to controle it and finetune it.
I moved my PC to this case last week but got the non Pro case because the Montech fans are subpar. I ended using Teucer Prism 120mm reverse blade (Lian Li clone) fans that were 6 for $45 on Aliexpress, these are way quieter than Montech ones and go up to 2000 rpm.
Hey, how do I control the fan speed? I've got the pro version with 3 extra montech 120's on the top - and all 9 fans are going full throttle all the time 😄
and the Glass or Mess question, front panel? Well if you put glass in it those to fans have no use I think? But nice build. I have the case myself, but went for am5 7800x3d with water cooling. I love the case.
I’m looking to build my first computer in the King 95 case and I’ve been wondering, can you/should you connect the radiator fans from the AIO to the montech RGB hub that’s pre installed in the top of the case? That way all the fans in the case including the AIO are hooked to the hub. And if so, would you connect power the power and the RGB lines to the hub (or would you connect power to the motherboard)?
The reason why its sticking out is because the board is an E-ATX board and the Montech King 95 technically does not support them. I checked before I bought my board. I got the red one and will start building my new system with it!
is it possible to use vertical gpu / gpu support bracket ( basic gpu stand , becuase of the fans ,not sure if its possible, arent they in the way ? , or ? )
Ok this is what I don't get and Im trying to find info on it. But according to newegg, this case supports up to eight 3.5" Bays where I can connect my HDD's to. But I don't see any place in the case to install these. Everything is taking up by fan space.
This is for a workstation build where I prefer air cooler for reliability, and honestly speaking - happy with the way it looks, just move the fan on the cooler behind and it just looks clean.
What does suck is that I did the same as what you mentioned is that only 5 out of the 9 fans light up for me they all work tho. Idk if I overloaded the fan hub or what I’m so confused
@@Violesada i found that i could plug some fans into the jrainbow port on my b550 mag tomahawk wifi put only 6 out of 9 fans work at the moment Don't know what the solution to do is
@@ethancbaker2002i am having the same problem but instead none of the fans spin. I have the same motherboard but instead its not WiFi. Gonna try your advice
I'm getting this case sometime in 2024. But i will be keeping the fans at default with the glas, and just add 3 more Montech ax120 for my 360mm aio for a top mount exhaust! although if you really would, Montech did make the case, such that you can still mount fans on the side, veil you have the adjustable side mount bracket on the front! BUT it seems they forgot, that this will total add up to 11 fans, IF you go all out😅🤔 so instead of giving us a 11 slot fan controller, they made it in such way, that you have to sacrifice some one way oth the other, like going with only 2 140mm fans at the bottom ect.😆🙃
What does suck is that I did the same as what you mentioned is that only 5 out of the 9 fans light up for me they all work tho. Idk if I overloaded the fan hub or what I’m so confused
My King 95 Pro (White) arrives tomorrow for my pure white build X670E AORUS PRO X Hellhound Spectral White 7900XTX 7950X3D 64 Gb Mushkin DDR5 6000 Redline White Deepcool AK620 Digital White I'll be going with the glass front on mine.
Beautiful case Are the Montech fans loud ? Cuz I'm not sure Wich version of the case I should get The normal or the pro version I like that fans a lot but like I said are they loud cuz what I saw was the lowest rpm of those are 800 I wonder if they are that much noticable Hopefully u can enlighten me
hey, I actually got separate review on the channel for the case. TLDR: The fans are on louder side vs high end fans, but if you don't whack them up to full speed - they are actually really good value.
@@A2KMedia i use Arctic p12 argb fans right now on around 1000rpm But I like the montech fans more Do you think it would be a downgrade sound wise Or would you say they are about the same
So, in cable management, you made no mention of the front panel connector (power button, specifically). My King 95 Pro, delivered 01/15/2025, came with a non-standard plug marked fr. panel. No adapter pigtail as referenced in the manual (if it can be called a "manual". Consequently , no means to connect the power button to the motherboard. Aside from this goof, a pretty nice PC case, albeit unusable. Hard to believe.
Glass front with AIO. After having to adjust the fan on the CPU cooler so it wasn't even I'm surprised you didn't go that direction. If it was a budget build I would get shifting the fan and not worrying what it looks like, but you put in a 4090 for goodness sake. Build looks sloppy unintentionally. I will say the camera work was pretty good.
@@A2KMedia True, but well everything new, then I would have chosen for the AM5 platform, which I did, because of the "update path" and DDR5 which is blazing fast. But anyways I like your build.
The stock fans from the case aren’t the best… but they are still coming with the case, so to those who are looking for value and have no fans already, buy the pro version. Just know your temps probably won’t be the best they can be. This is because the reverse blades don’t spin the fastest. But they aren’t terrible.
in my experience, investing in more expensive fans for the case always results in diminishing returns. I might be doing something wrong, but when I switched my cheap off brand fans for a full proper set on my current case, the gains were like, around 2 degrees, which made me get serious buyers remorse. The only real pro of more expensive fans is the silence, and in the case of the montech fans, that doesn't even seem to be an issue, so I don't get why people would feel the need to get something else if they don't just have money to burn.
@@Henrique-wv9xq I 100% agree, but say you have fans from a previous build for some reason (for myself, my case and PSU died in an accident while I was moving, but saved everything else) you might want to transfer over the better looking fans into this case. But also note I said “best” which is objective, so I guess I could have chosen better words to convey “if you are a PC enthusiast, know these fans will not give you the best performance, but if you’re an every day Joe like myself, but have no fans, the pro version is amazing.”
Best visual build demonstration for this Montech case by far
Amazingly unique and spacious case. I personally think the glass look gives it an unbroken line and visual clarity. Thanks for the video!
i know i'm late to this video but wanted people to know is that the inner door does pop right out. after removing the two screws that hold it shut, open it slightly and pull towards the back of the case and it will just pop off the hinges, reverse to re install. makes ones build in the case much easier
How do you like the case? Planning to get one .
@@abisography i love it! built like a tank. with my motherboard, had more than enough room to set my 360 AIO up with push/pull fans.my one gripe is that the built-in rgb isn't compatible with my motherboards argb out (ASUS )
I personally prefer the function of the mesh front as intake, but I have to admit the all glass setup does look the most striking. Very nice video, I subbed.
Love this build. It's so clean and I'm a fan of blue cases!
Glad you like it! Thanks for watching :)
Your the only UA-camr I’ve seen that spreads thermal paste out flat most people I see just make a division symbol
we do it for consistency in test results
I love the mesh front visual
A couple of AX fans on the front would have been better than the inverted RX, but I have to say this case is fantastic and on my radar for an upgrade to my current Be Quiet 801.
I've built in this case a few times and they make reverse fans if you want to hide the fan bracing on those front fans. My only issue I am having on my 3rd build with this case is the preprogrammed rgb settings with the button does not stay set and reverts back to the default bluish white every time it hibernates or powers off. Working with Montech now about this issue, but still one of my favorite cases to build in and customers seem to really like it.
any update on this?
@@johnvamvo5438 sadly not and I sold it awhile ago and the buyer didn't care about the glitch
Mine did not have that problem. But I did not like the options, so I went for SignalRGB ( Free version) If you hold the button for the RGB a few sec, then it will be free of the pre settings and SignalRGB can take it from there.
@@JanFarang Yep, I've used Signal before to solve the same problems. I could have had a bad controller and it is not uncommon; I have two new/warranty controllers coming from Phanteks for two NV7 builds i am doing (12 fans...most I've installed on a case); so it is taxing the amps/watts/LED #s on the controller.
Also if there is enough argb headers you can just plug everything into the mobo and use the manufacturers software (ASUS, Gigabyte, MSI). Also Razer Chroma is aweseome, however if you have too many fans for the controller you cannot sync up multiple controls (that I know of); but the day they figure that out, it will be my first choice as a builder. And the fact they are still using molex seems outdated.
@@garyc5245 I have a asus mobo, and went with that software ( forgot the name) that they have for controlling the RGB and so on. I and many others hated it, very heavy, and a lot of crap. When you google it, only complains and not without reason. Asus makes fine mobo's but that software is terrible. SignalRGB will take some time to config, and you have to look out for conflicting software like Icue... It does it all, mouse, keyboard, pc... love it, even the free version. The king 95 is a great case, but the RGB right out of the box, is not enough, it needs something to controle it and finetune it.
I moved my PC to this case last week but got the non Pro case because the Montech fans are subpar. I ended using Teucer Prism 120mm reverse blade (Lian Li clone) fans that were 6 for $45 on Aliexpress, these are way quieter than Montech ones and go up to 2000 rpm.
This is the way.
@@lionoh This is the way
Hey, how do I control the fan speed? I've got the pro version with 3 extra montech 120's on the top - and all 9 fans are going full throttle all the time 😄
hey, there is cable that goes from the fan controller at the back to your motherboard, ensure to connect it up.
and the Glass or Mess question, front panel? Well if you put glass in it those to fans have no use I think? But nice build. I have the case myself, but went for am5 7800x3d with water cooling. I love the case.
I’m looking to build my first computer in the King 95 case and I’ve been wondering, can you/should you connect the radiator fans from the AIO to the montech RGB hub that’s pre installed in the top of the case? That way all the fans in the case including the AIO are hooked to the hub. And if so, would you connect power the power and the RGB lines to the hub (or would you connect power to the motherboard)?
Aio goes to the pins on the mobo, for the aoi pomp. RGB can go to the hub with the rest.
The reason why its sticking out is because the board is an E-ATX board and the Montech King 95 technically does not support them. I checked before I bought my board.
I got the red one and will start building my new system with it!
is it possible to use vertical gpu / gpu support bracket ( basic gpu stand , becuase of the fans ,not sure if its possible, arent they in the way ? , or ? )
I have seen til Lian Li o11 Evo XL vertical stand used in this case 👍
I have the 4090 msi liquid Supreme x and struggling wit fan configuration
I also have 360mm cpu aio
Any suggestions
I’m about to do the same build. What u end up doing? Was thinking the gpu aio for intake and 360 for outtake on the top
Can you fit E-ATX motherboard in this case?
i am going to probably get the case tomorrow or should i get the h9 or h6 flow instead idk i am torn between those 3
is the case actually this big? i mean is it actually 30cm width? it seems so much bigger in the video
exact product dimensions are: 44.2(H) x 30(W) x 47.5(L) cm; 11.84 kg
How did you control your fan rgb w out using the case rgb button
click the case rbg button and hold for a while, it will then switch to motherboard control(as long as you connect it to the mottherboard)
What wires/leads do you connect to the motherboard? I would love to bypass the Montech controller.@@A2KMedia
@@rickss69yes this is a good question. Do I just plug the hub to the Motherboard?
i’d probably put the cooler fan on the back and pull through for the aesthetics, plus i don’t think it would make a huge difference
Yea, you could do that as well 👍
Ok this is what I don't get and Im trying to find info on it. But according to newegg, this case supports up to eight 3.5" Bays where I can connect my HDD's to. But I don't see any place in the case to install these. Everything is taking up by fan space.
hey, the Montech website says up to 8 2.5 inch drives or up to 5 3.5 inch. hope this helps
Insanely large cooler/fan which sure gave you some fit issues. Wondering why just didn’t change to AIO which would have made it a better look?
This is for a workstation build where I prefer air cooler for reliability, and honestly speaking - happy with the way it looks, just move the fan on the cooler behind and it just looks clean.
@@A2KMedia Or have ran with some non rgb ram🙂or aio or another air cooler with better ram clearance🙃🙊🤷♂
quedari mejor 2 de 140 ax y dejar los rx de 140 en su posicion lateral si configuras asi
wish this case came in green as well
strange choice for the cooler to restrict air flow because of the ram , why not use a AIO water cpu cooler
What does suck is that I did the same as what you mentioned is that only 5 out of the 9 fans light up for me they all work tho. Idk if I overloaded the fan hub or what I’m so confused
did you ever fix this?
@@Violesada i found that i could plug some fans into the jrainbow port on my b550 mag tomahawk wifi put only 6 out of 9 fans work at the moment Don't know what the solution to do is
@@ethancbaker2002i am having the same problem but instead none of the fans spin. I have the same motherboard but instead its not WiFi. Gonna try your advice
Thx u so much, great video its help me alot build airflow same thing like this 👍👍❤❤❤
Glad it helped
I'm getting this case sometime in 2024. But i will be keeping the fans at default with the glas, and just add 3 more Montech ax120 for my 360mm aio for a top mount exhaust! although if you really would, Montech did make the case, such that you can still mount fans on the side, veil you have the adjustable side mount bracket on the front! BUT it seems they forgot, that this will total add up to 11 fans, IF you go all out😅🤔 so instead of giving us a 11 slot fan controller, they made it in such way, that you have to sacrifice some one way oth the other, like going with only 2 140mm fans at the bottom ect.😆🙃
What does suck is that I did the same as what you mentioned is that only 5 out of the 9 fans light up for me they all work tho. Idk if I overloaded the fan hub or what I’m so confused
My King 95 Pro (White) arrives tomorrow for my pure white build
X670E AORUS PRO X
Hellhound Spectral White 7900XTX
7950X3D
64 Gb Mushkin DDR5 6000 Redline White
Deepcool AK620 Digital White
I'll be going with the glass front on mine.
That sounds amazing! any extra mods?
How much is your built. I want to build me one too almost exactly like yours but ram is T force and artic LF 3
Beautiful case
Are the Montech fans loud ?
Cuz I'm not sure Wich version of the case I should get
The normal or the pro version
I like that fans a lot but like I said are they loud cuz what I saw was the lowest rpm of those are 800
I wonder if they are that much noticable
Hopefully u can enlighten me
hey, I actually got separate review on the channel for the case. TLDR: The fans are on louder side vs high end fans, but if you don't whack them up to full speed - they are actually really good value.
@@A2KMedia i use Arctic p12 argb fans right now on around 1000rpm
But I like the montech fans more
Do you think it would be a downgrade sound wise
Or would you say they are about the same
So, in cable management, you made no mention of the front panel connector (power button, specifically). My King 95 Pro, delivered 01/15/2025, came with a non-standard plug marked fr. panel. No adapter pigtail as referenced in the manual (if it can be called a "manual". Consequently , no means to connect the power button to the motherboard. Aside from this goof, a pretty nice PC case, albeit unusable. Hard to believe.
Glass front with AIO. After having to adjust the fan on the CPU cooler so it wasn't even I'm surprised you didn't go that direction. If it was a budget build I would get shifting the fan and not worrying what it looks like, but you put in a 4090 for goodness sake. Build looks sloppy unintentionally. I will say the camera work was pretty good.
nice to see, but why build a new pc from scratch, with an old platform like am4?
AM4 was still pretty good for the work we do, and its reliable. We did recently upgrade though to AM5 :)
@@A2KMedia True, but well everything new, then I would have chosen for the AM5 platform, which I did, because of the "update path" and DDR5 which is blazing fast. But anyways I like your build.
The stock fans from the case aren’t the best… but they are still coming with the case, so to those who are looking for value and have no fans already, buy the pro version. Just know your temps probably won’t be the best they can be. This is because the reverse blades don’t spin the fastest. But they aren’t terrible.
in my experience, investing in more expensive fans for the case always results in diminishing returns. I might be doing something wrong, but when I switched my cheap off brand fans for a full proper set on my current case, the gains were like, around 2 degrees, which made me get serious buyers remorse. The only real pro of more expensive fans is the silence, and in the case of the montech fans, that doesn't even seem to be an issue, so I don't get why people would feel the need to get something else if they don't just have money to burn.
@@Henrique-wv9xq I 100% agree, but say you have fans from a previous build for some reason (for myself, my case and PSU died in an accident while I was moving, but saved everything else) you might want to transfer over the better looking fans into this case. But also note I said “best” which is objective, so I guess I could have chosen better words to convey “if you are a PC enthusiast, know these fans will not give you the best performance, but if you’re an every day Joe like myself, but have no fans, the pro version is amazing.”
i have one too!
Comment..Comment.. From İstanbul..Türkiye..
Why can't anybody show how to add a ssd or hdd. Thumbs down 100000000x
Самый кривой сборщик которого я видел 😂