0014 when a tail boom has a blunt end, the tapering of the tail boom is less-than complete. 0259 they are SERVOS. !!! not servo motors. 0441 the vert-stab is poorly designed. specifically, the root chords of the stabs should be EQUAL in length. with the vert-stab leading edge being at a slope of seventy-five degrees. it appears that the formers protrude from the fuselage excessively. 0516 at the vert-stab, due to the open structure of the material, the leading edge should be covered. or, the structure of the material should be aligned with the leading edge. the orientation of a control horn should be In Line with the pushrod. 0633 this configuration, at the nose, is going to make the distance between the prop and the wing slightly excessive. that distance should be roughly equal to one wing chord length. it should be determined whether there is a NEED to mount the esc externally. 0646 has it been determined whether the use of an eight inch E prop is compatible with the motor spec's. a cw prop should be used.! 0718 the use of hoerner wingtips is not recommended. 0936 the location of cg is at a Percentage of the chord. normally, thirty percent. forward-of thirty percent if there is an excess of aft-located mass. googletranslate
Good 👍
Great💯💯
Nice job
0014 when a tail boom has a blunt end, the tapering of the tail boom is less-than complete.
0259 they are SERVOS. !!! not servo motors.
0441 the vert-stab is poorly designed. specifically, the root chords of the stabs should be EQUAL in length. with the vert-stab leading edge being at a slope of seventy-five degrees. it appears that the formers protrude from the fuselage excessively.
0516 at the vert-stab, due to the open structure of the material, the leading edge should be covered. or, the structure of the material should be aligned with the leading edge. the orientation of a control horn should be In Line with the pushrod.
0633 this configuration, at the nose, is going to make the distance between the prop and the wing slightly excessive. that distance should be roughly equal to one wing chord length. it should be determined whether there is a NEED to mount the esc externally.
0646 has it been determined whether the use of an eight inch E prop is compatible with the motor spec's. a cw prop should be used.!
0718 the use of hoerner wingtips is not recommended.
0936 the location of cg is at a Percentage of the chord. normally, thirty percent. forward-of thirty percent if there is an excess of aft-located mass. googletranslate
Thankyou Bro For Tell my Mistakes , I will learn from That
This Kit Not Made By me..........so design Issue is not Mine .......
bro kit kitne ka pat jay ga bina koi electronic ke
Dm 9815029359
I want This Kit
Dm 9815029359
Which can i use radiomaster pocket or flysky i6 i have both
If u have Pwm Elrs Receiver, then Radiomaster Pocket, if not Fs-I6 will Also Work....
I want this Kit
Dm 9815029359