DIY Tiger Moth RC Biplane for FPV
Вставка
- Опубліковано 12 лис 2023
- This time I'm back to basic by using all foam board material with some plywood parts. This De Havilland Tiger Moth biplane RC plane is designed to have the same scale as PT-17 Stearman. While Stearman wingspan is 1300mm this Tigermoth wingspan is 1200mm. Smaller but still can do short take off. Using 3536 1200kv brushless motor, 40A Esc and 3S 2200mah can give this plane more than 5 minutes of flight time. The flying weight is about 1145 gram, with that made this model has 4 on wing cube loading and that's almost like a glider. Because it's the same scale as Stearman you can use Stearman's papermodel pilot figure.
You can download the plans and see build instructions on this link below :
paper-replika.com/index.php/r...
Join this channel to get access to perks:
/ @juliusperdana
Specs :
1. Wingspan 1200mm / 47.2 inch
2. Flying weight : 1145 grams/ 40.4 oz
3. Wing loading : 26.2 gram/dm2 - 8.6 oz/sq.ft.
4. Wing cube loading : 4 (Between glider and trainer)
5. Wing Area : 43.68 dm2 / 677 sq.in.
6. CG : The rear center wing strut on the upper wing.
Electronics for test
- DXW 3536 1200kv
- Prop 10x5 (2 blades) - 11 inch
- 50A ESC - 40A minimum
- Battery Lipo 3S 2200mah
- 4 x 9 gram servos (micro servo)
FPV :
- 600mw 48 channel Video transmitter (VTX)
- Runcam 2 for record and FPV
- FPV Goggle with diversity antennas
Transmitter
- Jumper T16 + BetaFPV Express LRS TX module
- 10 ch BetaFPV Express LRS RX - Навчання та стиль
Again another Awesome model my friend
Glad you like it
@@JuliusPerdanawould you say this could be made with Corro-Plas?
@@user-nd4nz2zd9qperhaps,but would increase its weight by lot.
@@JuliusPerdanahow are you ❤️ sir I need and help from I am trying to build a drone like yours like M Q 9 Reaper drone but I need some help about the design I could not understand the designing can you please help me sir about the designing if you help me I can build a drone from myself for a science project❤ by the way big fan from Bangladesh if you have some time please reply my 😊comment
@@JuliusPerdana@JuliusPerdana how are you ❤️ sir I need and help from I am trying to build a drone like yours like M Q 9 Reaper drone but I need some help about the design I could not understand the designing can you please help me sir about the designing if you help me I can build a drone from myself for a science project❤ by the way big fan from Bangladesh if you have some time please reply my 😊comment
this guy's content and creations never gets old.
Only one word ,''GENIUS''.
You have such a skill for building amazing planes that no one I know is parallel to you. You are unique, Julius!!!
thank you so much
For the benefit of the aero modellers like me, please consider conducting an online class. If I get a chance to learn from you by coming to your workshop and learning in person, I will come immediately. Even by being with you and helping you in whatever possible ways, I can learn something new everyday.
Parabéns... você o melhor do UA-cam... Brazil
Thank you for the 'old school build' as i don't have a 3d printer 😊. I will start making this plane during this winter
I built your Stearman (reduced to 48" to fit my car) last year. It flies beautifully!
Your T2 Buckeye is half- built (reduced to 48" again) and I agree with you, it is a lovely plane. I am expecting great flying again and having seen this Tiger Moth of yours, I know what to build next. Very impressive!
The FPV set up is amongst the best I've seen, well done!
The DIY camera and the type of foam you used in this protect are the selling points for me.
You leave me speechless friend.
Great.
I've been watching your videos since the beginning and you don't lose your motivation over the years! I have no problem building a plane but your videos are always a treat to watch!
Thank you for everything Julius, there must be many of us watching your videos from France👍
That is awesome!
Wow every time I am amazed
That is totally gorgeous ! Thank you so much, its deeply appreciated.
Thank you once again love what you do. Early aviation stunning build and flying.
Wow !! ❤ loved it Julius
Great build!!! Maybe you can try some famous, but less seen as model airplanes?
I mean, like we see lots of Spitfires and those famous ones. But you never see stuff like the Fairy Swordfish and Polikarpov I-15.
They are famous biplanes but you never see them flying as a model. I know you can do it!
Others: Hawker Typhoon, Curtis Kittyhawk, Westland Lysander, Grumman Avenger (Wildcat, Hellcat), SBD Dauntless, TBM Avenger, Brewster Buffalo, A6M Zero, Stuka.
Some with twin engine that are also famous but you do not see them flying as a model. Maybe because they are more complicated than single engine?
Lockheed Lightning, Messerschmidt BF-110 and DH Mosquito, Westland Whirlwind, Bristol Beaufighter and Fokker G-1.... just to name some!
Absolutely fantastic, well done! The master of foam!!❤
thank you
Julius, your aircrafts is so realistic it looks like the real aircrafts🛫
Genius at work again, love the Tigger Moth
Really looks the part, very cool and again - so innovative!
This is awesome!! Have you started building the SR-71 yet?
Wow. The best.
Makes the tucano t27 Brazilian Smoke squadron, please!!!
Another winner, and the fpv is right on👍👍
Excellent reproduction and excellent work, congratulations Julius.
Greetings from the U.S! I love all your builds, they’re always so beautiful. I’m gonna be building your cherokee soon! keep up the amazing work!
Obrigado. Seus aviões são fantásticos
Very nice! Kind of complex plane to build!
Julius, gracias por hacer magníficos trabajos y compartirlos con todos los que te seguimos.
Saludos y felicidades.
Awsome plane my friend ,You should also consider the RV 8 some time ,nave a nice Day,night
Very good content, keep it up dude😊
Hi Julius. I always loved this plane. Amazing model and skills as usual. Everytime i see you have uploaded a video, it makes my day. Thank you very much
Excellent realization! Many compliments again!😊👌
Thank you so much 😀
Amazing omkuh😍
You are a hot glue wizard Julius! Nice work.
Mais um,parabéns amigo
AMAZING !!!
You are So, So talented Julius!!! All your scale models look so good, and they all fly great too. Keep up the great work. One of these days I'm going to build one of your ATR twin commuter prop-jets!!!
parabéns ficou muito bom!
Congratulations on the great work Július, I really like this biplane model 👍👍
Thanks a lot!
Very nice plane, perfect explanations, super job
Thanks a lot!
Exclent work
Keren om !! Videonya bikin kaya terbang beneran jadinya.
thanks masbro udah mampir
Hrgnya brp om klo di jual?
I love the fact that you used both Australian military and civilian registration on this model😉...another one I will be building soon now that I've seen this 🙂...The A17 titles were also used on the CAC /Bell 206B Kiowa (military version of the Jetranger manufactured under license in Australia ) helicopter when they were in service with the Australian army (now retired from military service)
Nice airplane! I would like to see how You make an airtractor 402
Top demais amigo, show de bola 👍👍👍👍👍👍👏👏👏👏👏👏💪💪💪💪💪💪🤜🤛😍🤩
Awesome
Good work Julius! (& company) . This biplane looks like something i have to try one day or another. But in my case i prefer to assemble the wings on the field, for better transportation. And i can see, no 3D printing on that nose! that was great! 😁
Thanks a lot!
Как всегда супер отличноя работа . А покажи сборку AIRCO DH-2 . Удачи Вам .
Outstanding, as always.
Julius, you should try a motor glider like the ASK-14. Or a Monnett Moni.
Top. Goodyear. Verre good
Bel modello i miei complimenti, aspettiamo la creazione di un modello jet ....continua così
Julius é Julius Perdana,parabéns 😊
Awesome Work!! Would you consider working on Bayraktar Kizilelma sometime?
Anjayyy, keren omm👍
Keren om,next kalau boleh request bikin pesawat CN 212i 😊
Thank you
Good brother
can u pls build an f-15 EX. increadible plane by the way❤❤
ye could u build that?
I wonder where do you keep all those fine aircraft you've built
Gracias
Please make a video of the makeshift iron
Hi Julius, will you bring to the channel a video tutorial on how to build a Fiat G 50? Thank you
very nice build!! how long did it take to make it?
o Julius e fantástico !!!!!!!
Can you please make an f 15
It would mean a lot to me
Yet again another fine model aircraft Julius! Would you consider adding a DH Chipmunk,Rockwell B1B Lancer and a B52(Big Buff) to your list eventually? Can't wait for your SR71 Blackbird and Concorde in time also,you are a terrific designer,builder and flyer Sir 😎🤘👌👍
Why you don't build vtol fixed wing plane I'm big fun for that plane
Another awesome model as usual,how was the mini iron made?
he use mosquito repellant heater
improvised from the mosquito killing badminton?@@JuliusPerdana
no, not that. It's usually plugged in on a wall, a heater you can refill the repellant for mosquito
oh, i understand now, stupid me, thanks for taking the time to clarify it. @@JuliusPerdana
Julius. I had a lot of fun building your Stearman. great airplane. Having trouble with the tiger moth. Unlike the Stearman, the parts were not sized to print and join.
I took the fuselage and wings to Fd Ex and had them sized. Wings at 24 inches (1/2) Fuselage 28 inches. but couldn't figure out how to size the bulk heads and the parts on the download sheet where all of them show up. How do I get the sizes for those parts?
Actually I didn't build it, I send all the plans with build instructions to my builder and he build it without any problem. So I think all parts are all in the correct size. Did you resize it or else? Can you point it out which page or parts that not correct?
Here is what I mean for example. I bring up the page with all the F parts and others. I select F17 and when I print F 17 it is only 3 inches high and 1 and 3/4 wide. What measurement should it be? How do I scale each of the parts on that page to the correct size?@@JuliusPerdana
It was my mistake. I feel embarrassed. I did not download and print the full 31 pages. Everything is the right size now. Thanks for your response.@@JuliusPerdana
reat work, congratulations, but one question is how many foam boards did you use?; Thank you and congratulations!!!!!
Hi Julius I was wondering if you could make a rc glider model like an Schweitzer 1-26 or some other gliders please because I haven’t seen you done one yet
Dear Julius,
I adore your abilities and your models! ... and would like to try building your wonderful tiger moth. Unfortunely, i am unable to downlóad the plans from the links mentionend.
What am I doing wrong?
BR
Gerald
I just check it out, there's no problem with the link. I just download the PDF files. Go here paper-replika.com/index.php/rc-foam-project/tigermoth-1200mm-biplane-rc-plane
and scroll down for PDF links. If you see and advertising blocking the screen just close it, don't open it
Now it works. Maybe the server was down while I tried. Thank you so much, Julius!
Would making a Tiger Moth at this scale using balsa whilst remaining electric powered result in an overweight model ?
Hi Julius, what is the ideal distance to install the landing gear?
somewhere on the CG location, if it tail dragger it needs to be more forward position from the CG. if it tricycle the main landing gear needs to be on behind the CG location but not too far for easier rotating on take off
Consegue fazer fuselagem do helicóptero 450 escala de depron?
hi julius its possible to make the airbus a 400m in 3meters or more ?? thanks you man
Pls. Make plan Yak-130
Hello Julius, is the issue of the stabilizer incidence modified in the published plan ?
yes already redesigned
@@JuliusPerdanaThanks for your prompt response . Greetings.
I would like to be able to build your tiger project but very small with a wingspan of 50cm, how do I do it?
you need to use 2mm foam board, a mini brushless motor. print it in 41.6%
Hello Julius, I am making the tiger moth, could you tell me what incidence the wings should have? From already thank you very much. Greetings
just follow the plans
Você deixou os arquivos? Gostaria de tentar fazer um desses
Ada link olshop nya om
👍🔥👋
What’s next ? I hoop rc paramotor 😢
Next time stuka plane project
where do you get your foam board from?
from a local store
Orang indo kan yah?
Hello mr julius
Tucano t27 plzzz😢
Buka kelas offline kah om, sy minat
Yo hi 👋
Bang knpa template Masjid Aqso gak bisa di download ?? Link nya error..
try again, already fixed
@@JuliusPerdana oke thank's Bang, udah bisa 👍🏽👍🏽😁
Hi my brother please send me for e-mail the plant .
check description for download link
Puas2 kita main aero plane
Mumpung negara kita moga2 ga sebego itu ngikutin thailand,
Krn disana kelas mainan aja yg terbang tinggi 5 meter hrs daftar dulu di pemerintah, klo ktauan illegal terbang, bakalan kena denda puluhan juta
Dan daftarnya SANGAT SULIT
I CAN DIY TO MAKE A TIGER MOTH TRAINER PLANE BY YOUR WAY. I WOULD USE PVC PIPE AS THE MATERIAL AND IT WOULD BE A STATIC MODEL PLANE IN 1/35 SCALE . IT WOULD BE YELLOW COLOR AND I WOULD WRITE
汕頭第壹號
THIS CHINESE ON BOTH SIDES OF IT
Valeu!
Thank you very much
HAI JULIUS. GREAT JOBE!! BEAUTIFUL PLANE! AI M WAITING TOO FIX A CONCORDE!!!! A BIG CONCORD!!!! GEORGE FROM GREECE....
Thank you very much!
Hi, where do i find the plans for it ??
check description?
@JuliusPerdana how are you ❤️ sir I need and help from I am trying to build a drone like yours like M Q 9 Reaper drone but I need some help about the design I could not understand the designing can you please help me sir about the designing if you help me I can build a drone from myself for a science project❤ by the way big fan from Bangladesh if you have some time please reply my 😊comment