How to screen printing CMYK glossy silicone effect on elastic taps?

How to screen printing CMYK glossy silicone effect on elastic taps?
Preparation:
1.Mesh&Squeegee: HD and glossy screen Mesh number 120-150 (48-59T),CMYK Mesh number300(120T) ;
2.Squeegee 65-75 degree Squeegee sharp and flat.
3.Pigments added ratio:For white and fluorescent color 20%,other color 10%
4.Catalyst mixing ratio:10%
5.Silicone thinner XG-128AH adding ratio:10-20% :20%
6.Heating Temp and time: Flash cure temp :100℃- 120℃ for 6-10 seconds ,after finish printing to dry by temp :120℃- 140℃ for about 2 -3 minutes.
Process:
Step1:Elastic Silicone ink for under coating and HD printing for 10-25 layers
Elastic silicone XG-130D-3 60 G
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds.
Step2:CMYYK color effect elastic silicone printing 1-2 layers
Elastic silicone XG-130D 60 G
Color pigment XG-102 12G 20% white color
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds
Step3:CMYYK color effect elastic silicone printing 1-2 layers
Elastic silicone XG-130D 60 G
Color pigment XG-203 6G 10% yellow color
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds
Step4:CMYYK color effect elastic silicone printing 1-2 layers
Elastic silicone XG-130D 60 G
Color pigment XG-203 6G 10% red color
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds
Step5:CMYYK color effect elastic silicone printing 1-2 layers
Elastic silicone XG-130D 60 G
Color pigment XG-408 6G 10% blue color
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds
Step6:CMYYK color effect elastic silicone printing 1-2 layers
Elastic silicone XG-130D 60 G
Color pigment XG-203 6G 10% red color
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds
Step7:CMYYK color effect elastic silicone printing 1-2 layers
Elastic silicone XG-130D 60 G
Color pigment XG-501 6G 10% black color
Elastic silicone catalyst XG-130DB 6 G 10%
Silicone thinner XG-128AH 6-12G 10%- 20%
Cure by temp of 120℃ for 6-10 seconds
Step8:Glossy silicone ink top wet on wet printing 2 layers:
Glossy silicone ink XG-399-2 60G
Slow dry catalyst XG-MB-1 6G 10%
Cure by temp of 80-100℃ for 10-25 seconds
It will be better to use low temp by longer heating time. To avoid bubbles problem. After printing finish, to heat by 100℃ for about 2 -3 minutes
For more silicone ink information kindly follow our website :www.xgsilicone... or contact with Lily :[phone] whatsapp&wechat the same number