How to replace the rear shock absorbers Corsa D ➿
Вставка
- Опубліковано 2 сер 2024
- BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore
📱⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Multi-purpose grease
- Shock absorber : bit.ly/backshockabsorberG1037en
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Rear shock absorbers on a Opel Corsa D.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Corsa D : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 5mm Allen key
- Torx E14 socket
- Torx E18 socket
- 18mm spanner
- Socket wrench
- Small socket wrench + extender
- Wheel lug wrench
- 10mm socket
- Torx T25 socket
- 14mm Offset wrench
🔝💪Safely lift your Corsa D with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- Hydraulic jack
- Wooden peg
- Axle stand
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
- We advise never replacing just one shock absorber, to make sure you drive we the most balanced vehicle possible.
- The use of a jack to counter balance the pressure of the shock absorber spring is strongly advise, as explained in the tutorial.
Usetool's infos
No particular piece of information necessary to carry out this operation
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely : • How to (PROPERLY) lift...
- [ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel : • ASTUCE : Pneu crevé ? ...
Space Race by tubebackr | / tubebackr
Music promoted by www.free-stock-music.com
Terms and conditions of the offer : www.mister-auto.co.uk/operati... - Авто та транспорт
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore
📱⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
Really great how to video. Thanks. Don’t forget the torque values: The 2 top mounting bolts: 55Nm, then 60 degrees then a further 15 degrees. The bottom bolt 90Nm. These bolts should be replaced with new bolts.
Hey, thanks for your instructions in the comments. I am planning on changing my own and I was wondering if you could help me with what is meant by tightening an extra 60 then 15 degrees?
@@minilegomasters2023 you use the torque wrench to tighten the 2 top mounting bolts to 55Nm, then tighten further by turning the bolts another 60 degrees each, and then a further 15 degrees.
@@rubberneck2 cheers! thank you very much
What is the shock absorber brand you use or suggest.
We use Bolk shock, it's good value for money
greasing the screws is idiotic