That button on the left joystick locks proportional valve on so you don't have to hold it all the time, press and hold switch on the right joystick and press button on left joystick and your aux should be running full time until you press button again... Cheers
@@ShaneBurrell1 yes that is true, what year is your machine? I work as a mechanic for SANY in Croatia, take a look at my channel, not allowed to post SANY videos but still...
@@harveydheffield357 It has been very good. Mine was made in Georgia (150 miles away from me) and Paladin made the bucket/coupling and its all high quality. Yanmar engine.
Great informative video. Been back and forth between this and the Kubota kx 033. Price point and warranty are huge for this machine. I'm an arborist and would be using it for my business primarily. Just can't make up my mind.
Glad you like them! Both are great machines. I went with the 35 mainly for transport reasons. It's been a great machine so far. The 50 is a great size and comes with a few more options standard from what I've seen. 2nd hydro being one. You can get it on the 35 but not many ordered that way vs the 50.
@@ShaneBurrell1 thank you for the response. Have you wished for more power when using the new brush cutter? What kind of transport concerns do you have with the 50?
The 35 has plenty of power for the cutter. I actually turned the flow down a bit. The 50 has futher reach and more weight to swing over the side. Transport wise it puts you in a 16k trailer min vs a 12 or 14.
The cup holder wasn't thought out well. I just use the hook right above with a water bottle with a hanger tab on it. Some day I may get aggravated enough to machine a proper drink holder for it for my Wendy's cup.
You have constant flow if you push the menu button and then press the second icon from the left it will light up blue then hold the thumb function for 5 seconds it will stay on
Just asking. Still happy? Worry about these off brands. Seems sany has decent reviews...just always stuck to kobelco, kubota and bobcat. Scared to pull the trigger. Anything to add after a couple years?
@@ShaneBurrell1 Bought one and added a rut brush cutter. Seems no way to run the mower without having to hold the button full time to keep mower cutting. That is crazy. You figure out a way to get aux running without having to hold button the full time??
Hi Shane. Chuck here. I had a viewer ask me about how to reset the system after maintenance he is asking about the password I believe. In mine it just has 0 zeros. Any chance you know how to set up new password numbers?
Met with my local Sany salesman yesterday. Should be picking up my new SY35U next week! Thank you for taking the time to make videos on yours!
Glad to help!
I enjoyed your review. I am thinking of getting one myself. An update video would be nice as well.
Great review of the machine and its performance! Thank you for your time and information! Bless you and have a wonderful day!
Thank you! You too!
That button on the left joystick locks proportional valve on so you don't have to hold it all the time, press and hold switch on the right joystick and press button on left joystick and your aux should be running full time until you press button again... Cheers
I'll give that a try next operation. The manual says they are for future use.
@@ShaneBurrell1 yes that is true, what year is your machine? I work as a mechanic for SANY in Croatia, take a look at my channel, not allowed to post SANY videos but still...
It's a 2021.
Great walk around review. Nice to have a solid machine. Love it
Thanks! How is your Sany doing?
@@harveydheffield357 It has been very good. Mine was made in Georgia (150 miles away from me) and Paladin made the bucket/coupling and its all high quality. Yanmar engine.
Great informative video. Been back and forth between this and the Kubota kx 033. Price point and warranty are huge for this machine. I'm an arborist and would be using it for my business primarily. Just can't make up my mind.
For the price the Sany is a better value IMHO. I like Kubota machines as well but do not regret buying the Sany, it's been solid.
Please be sure NOT to buy a Sany from an Auction. If it has ever been through an auction, the WARRANTY IS VOIDED. Please do your research with Sany
Great review hoping 2 see more videos of the good and bad as you use this unit #williamshardwoodspecialist 👍
More to come!
Thank you for making these videos. I'm looking at the 35 and 50.
Glad you like them! Both are great machines. I went with the 35 mainly for transport reasons. It's been a great machine so far. The 50 is a great size and comes with a few more options standard from what I've seen. 2nd hydro being one. You can get it on the 35 but not many ordered that way vs the 50.
@@ShaneBurrell1 thank you for the response. Have you wished for more power when using the new brush cutter? What kind of transport concerns do you have with the 50?
The 35 has plenty of power for the cutter. I actually turned the flow down a bit. The 50 has futher reach and more weight to swing over the side. Transport wise it puts you in a 16k trailer min vs a 12 or 14.
Great review Shane! Glad the Mini X is working good for you. Happy Thanksgiving! See ya!
Happy holidays!
What brand work boot you wearing mate?
Thorogood.
How do you get the door from popping open? Love my Sany but it’s annoying….
So far my door stays shut. I have noticed it's less shut now then when it was new and suspect there is adjustment at the latch or nader pin.
I wish they came up with a better cup holder in the 35. Only thing I don't like about mine
The cup holder wasn't thought out well. I just use the hook right above with a water bottle with a hanger tab on it. Some day I may get aggravated enough to machine a proper drink holder for it for my Wendy's cup.
I agree poor design on the cup holder
You have constant flow if you push the menu button and then press the second icon from the left it will light up blue then hold the thumb function for 5 seconds it will stay on
I'll try that out today and see if it works on mine. Thanks!
Thank you Andy! That does indeed work on my SY35U.
Just asking. Still happy? Worry about these off brands. Seems sany has decent reviews...just always stuck to kobelco, kubota and bobcat. Scared to pull the trigger. Anything to add after a couple years?
No issues at all. Track speed maybe the only thing I've really noticed that might be as quick as other machines in the class.
@@ShaneBurrell1 Bought one and added a rut brush cutter. Seems no way to run the mower without having to hold the button full time to keep mower cutting. That is crazy. You figure out a way to get aux running without having to hold button the full time??
@@ghostflight73 Depending on year and model in breaker mode you can set it up to push on and off and not have to hold the button.
Good tips for SANY
Did you get the tilt bucket from Sany?
Mongo Attachments. Works with Palaidan/Sany quick attach and works without any modifications.
Nice machine ,what do you think about stability ?
Its good for a 35 size machine.
@@ShaneBurrell1 thanks its a robust machine and good motor and hydraulic Rexroth. Thanks and good job 💥🕹️🤙
Hi Shane. Chuck here. I had a viewer ask me about how to reset the system after maintenance he is asking about the password I believe. In mine it just has 0 zeros. Any chance you know how to set up new password numbers?
For the 2021 53188 works.
Okay thanks greatly appreciated
Every boys dream 😅