I have a 2017 great machine, looks like the new one has more computer control than mine . Same drink holder that breaks and won't hold a drink. Very powerful hydraulics and smooth without all the computer control , air-conditioning works great.
My limit was towing. I had a JD27 prior and like the bigger machine. I would have gotten a 50 or maybe 60 if a trailer upgrade would not have been an issue. They are great machines.
That left key position is for heating the glow plugs when cold. At least that's the way it is on the 80u and the position is labeled "heat". 35 may or may not have that
Not sure but it appears the 35 auto cycles electronically. If cold when your turn to start it will auto delay the starter. I bet they used there standard switch. Mine isn’t labeled at all in that position.
@@ShaneBurrell1 most every machine that has electronic control will auto the glow plugs when key is turned on. If for some reason the auto glow is not sufficient in very cold weather, you should be able to hold the key in the glow plug position. This manual override is also present just in case the auto glow is not working.
I learned a few new things about mine from watching you go through yours. I’m kind of a grip it and rip it guy so I ran through quite a few hrs without knowing what all the button were for. Great explanations. Much appreciated
Congratulations I’m seriously looking at Sany in the 35 or 50 model. I’ve been looking at the Yanmar for about a year now until I came across the Sany on the Dirt Monkey channel.
The yanmar vio series is a good machine. If you don't have a transport issue with a 50 size machine I always recommending getting larger when possible.
looks like a decent machine,well priced, standard finition. that fonction screen would find a better niche just above the ashtray what does warranty look like?
Good luck if you have any issues with it getting Iron Peddlers to fix it! I have a 2020 sy35u I brought from them in Monroe NC. Right after I bought it the thumb starting leaking down, it will flop when not in use. I contacted them and still to this day they will not fix it! That have the worst customer service I have ever seen! It actually cost them a big sale from a friend of mine due to the way they treated me!
I just got quoted 42,000 without the enclosed cab. Where did you get yours from? I’d much rather get a cab for 43. Let me know please before I close this deal next week
Sany has a dealer network and from what I've seen they all have similar prices. I expect 42 is the current price for a non-cab with recent price increases. I purchased mine from Iron Peddlers which covers my area. Most equipment purchased recently prior to parts shortages are worth more than most paid just a year or more ago. Cars,RVs etc are all in similar shape.
Are these about 38k? Just wandering how much a difference they are in your area vs mine. I'm going to find out this week I'm going to ask for one specs just like yours and see what they quote me, how much are you using yous besides your mowing
With cab they are around 43k delivered. This price likely recently went up some because of global supply issues. I use it for mowing the yard and landscaping around the property mostly. Find myself using it for something at least once a week.
I see that they use thin wall tubing to mount the front blade to the base! I hope yours does not break off like I've seen it happen on other jobs. The machines that use solid iron plate are a lot safer. If that blade brakes off while you're sitting on a steep hillside it could be very dangerous. Or if you're lifting that machine by 3 corners when the blade breaks off, look out!!!
Looking at it I don't think it's going to go anywhere. Looks very similar to my JD27 I used to have as well as the Vio 35. Do you have specifics on this actually happening?
@@ShaneBurrell1 yes I do. We were working on a job at a refinery and a different operator had to cut a trench across the slope so he used the blade to level the machine as he was digging. It was a small Caterpillar excavator approximately the size of a 303 - 305 A few days later I was using the same excavator digging trenches on flat ground and the blade fell off showing rust at the brocken edges. Showing in had probably been broken for several days when it fell off. They had to take the machine out of service and take the broken blade parts off of the machine and welded them all back together with a bunch of reinforcement before putting the blade back on the excavator so that I could continue working. Since then I always notice what kind of material they use on the dozer arms on excavators!!! One dozer arm was broken completely off and the other one was broken most of the way off. I can't believe tractor companies didn't research that area to realize how weak the tubing would be on something like that. Cat uses thick plate steel on some of their models and tubing on some of the others. Anybody who has a machine with the tubing should reinforce it! When it broke the time that I was operating it I was not putting a lot of down pressure on the blade but it still broke from earlier damage!!! The broken areas were at the crossbeam between the two arms that holds the hydraulic cylinder connection. When they welded the dozer parts back together they had to put long pieces of steel plate welded to the bottom side of both of the those arms for reinforcements.
Looking at the Sany it appears mostly if not all machine welded. Not sure what may of happened on the Cat machine. I've seen some rust on some grey market machines that had salt exposure but my previous JD 27C and the new Sany the blade is a lifting point and I'd trust them to stay attached.
My Sany was made in Georgia. There is a USA dealer network and they are made here. Yanmar engines, Italian Hydro. The price I'm sure is elevated at the moment but I paid around $43k.
IWith cab they were around 43k delivered. This price likely recently went up some because of global supply issues and inflation. Best to just give your local dealer a call. It's a no haggle price and usually on the machine at Sany dealers.
It's usually bad practice but it's been a while now and economy has changes. I paid in the low 40's. Same machine today is closer to 50k or just above.
I prefer machines built in Japan, sany is made in China. 6k more you could purchase a kubota or takeuchi with much better resale value. Like money in the bank and you get a better built machine. These days equipment holds its value
I like Kubota and Tak but there has been no supply of those for a while now and at the time the prices quoted were significantly more than 6k difference with a long unknown wait on delivery. I was able to find Deere but not a cab version.
Unfortunately, they will likely see your money regardless of what brand you buy. My particular Sany was made in Georgia. The bucket and quick coupler is by Paladin. Most of the controls and hydraulics are Europe made. John Deere, Case, Agco and all major players have factories in China. There isn't a machine you can buy these days that won't happen with, but at least in the Southeast if you buy a Sany some of that money is supporting a working family in Georgia as they have a major manufacturing plant there in Peachtree City.
@The Richest Man In Babylon Kubota as of 2013 is having their engines made and other parts in china. Company name Kubota Engine (WUXI) Co.,Ltd. Location Wuxi city, Jiangsu, China
I have a 2017 great machine, looks like the new one has more computer control than mine .
Same drink holder that breaks and won't hold a drink. Very powerful hydraulics and smooth without all the computer control
, air-conditioning works great.
Does yours have a split side window or solid?
so air cond is heater or cooler,? texting from ALASKA HEATER MORE IMPORTANT
I was looking into a SY26u but this one looks nice. I don't have much need for one but always wanted one.
My limit was towing. I had a JD27 prior and like the bigger machine. I would have gotten a 50 or maybe 60 if a trailer upgrade would not have been an issue. They are great machines.
So cute just in your voice you sound so excited
It was a good day. Swapping out a Non Cab no AC JD 27 for Sany 35 with cab and AC.
Excellent video.... I pick mine up this week. It was helpful to see you talk about the instrument control inside the cab.
Glad it was helpful!
That left key position is for heating the glow plugs when cold. At least that's the way it is on the 80u and the position is labeled "heat". 35 may or may not have that
Not sure but it appears the 35 auto cycles electronically. If cold when your turn to start it will auto delay the starter. I bet they used there standard switch. Mine isn’t labeled at all in that position.
@@ShaneBurrell1 most every machine that has electronic control will auto the glow plugs when key is turned on. If for some reason the auto glow is not sufficient in very cold weather, you should be able to hold the key in the glow plug position. This manual override is also present just in case the auto glow is not working.
Hey congratulations buddy. Looking forward to watching you work with it
I learned a few new things about mine from watching you go through yours. I’m kind of a grip it and rip it guy so I ran through quite a few hrs without knowing what all the button were for. Great explanations. Much appreciated
It's a great machine. Hoping at some point they enable use of the left hand switches to allow full on and off of the aux flow for the mower.
hello i am excavator operator. now i am using 2022 sany sy35u . Good machine sany
Nice 👍
Congratulations I’m seriously looking at Sany in the 35 or 50 model. I’ve been looking at the Yanmar for about a year now until I came across the Sany on the Dirt Monkey channel.
The yanmar vio series is a good machine. If you don't have a transport issue with a 50 size machine I always recommending getting larger when possible.
@@ShaneBurrell1 good advice thank you and happy new year brother.
The warranty is awesome
Haven't had to use it yet but glad its there.
looks like a decent machine,well priced, standard finition. that fonction screen would find a better niche just above the ashtray what does warranty look like?
5 year 5000 hour warranty.
horsepower?
Good luck if you have any issues with it getting Iron Peddlers to fix it! I have a 2020 sy35u I brought from them in Monroe NC. Right after I bought it the thumb starting leaking down, it will flop when not in use. I contacted them and still to this day they will not fix it! That have the worst customer service I have ever seen! It actually cost them a big sale from a friend of mine due to the way they treated me!
So far I haven't had any issues.
Hi Shane! Great content. I am interested how much this unit cost you? I'm looking at the sy26, for ease of towing.
All equipment has went up in price since my purchase last year. The sany was about 20K lower than Cat and Kubota if that helps.
I just got quoted 42,000 without the enclosed cab. Where did you get yours from? I’d much rather get a cab for 43. Let me know please before I close this deal next week
Sany has a dealer network and from what I've seen they all have similar prices. I expect 42 is the current price for a non-cab with recent price increases. I purchased mine from Iron Peddlers which covers my area. Most equipment purchased recently prior to parts shortages are worth more than most paid just a year or more ago. Cars,RVs etc are all in similar shape.
Can you use DAB adapter to the radio? or change to a DAB radio?
A DAB radio with bluetooth pairing should work. I have paired my iPhone to the Sany with no issue.
Are these about 38k? Just wandering how much a difference they are in your area vs mine. I'm going to find out this week I'm going to ask for one specs just like yours and see what they quote me, how much are you using yous besides your mowing
With cab they are around 43k delivered. This price likely recently went up some because of global supply issues. I use it for mowing the yard and landscaping around the property mostly. Find myself using it for something at least once a week.
@@ShaneBurrell1 Is that 43k all in including the buckets you got? I'm getting priced at 51k with thumb, 18", 24", and cabin :(
@@iceorphen it was but I’m sure inflation has taken effect by this point.
Yea its 50k for no cab now. Wow good thing the power plant pays me more for higher cost of living…..wait nope
Where can i find the adapter to go from sany to kubota buckets
You would really need a new coupler for that to keep bucket breakout. I'm pretty sure werk-brau sells them.
I think those have two travel speeds. Hi/low
They do.
I see that they use thin wall tubing to mount the front blade to the base!
I hope yours does not break off like I've seen it happen on other jobs.
The machines that use solid iron plate are a lot safer.
If that blade brakes off while you're sitting on a steep hillside it could be very dangerous.
Or if you're lifting that machine by 3 corners when the blade breaks off, look out!!!
Looking at it I don't think it's going to go anywhere. Looks very similar to my JD27 I used to have as well as the Vio 35. Do you have specifics on this actually happening?
@@ShaneBurrell1 yes I do.
We were working on a job at a refinery and a different operator had to cut a trench across the slope so he used the blade to level the machine as he was digging. It was a small Caterpillar excavator approximately the size of a 303 - 305
A few days later I was using the same excavator digging trenches on flat ground and the blade fell off showing rust at the brocken edges. Showing in had probably been broken for several days when it fell off.
They had to take the machine out of service and take the broken blade parts off of the machine and welded them all back together with a bunch of reinforcement before putting the blade back on the excavator so that I could continue working.
Since then I always notice what kind of material they use on the dozer arms on excavators!!!
One dozer arm was broken completely off and the other one was broken most of the way off.
I can't believe tractor companies didn't research that area to realize how weak the tubing would be on something like that.
Cat uses thick plate steel on some of their models and tubing on some of the others.
Anybody who has a machine with the tubing should reinforce it!
When it broke the time that I was operating it I was not putting a lot of down pressure on the blade but it still broke from earlier damage!!!
The broken areas were at the crossbeam between the two arms that holds the hydraulic cylinder connection.
When they welded the dozer parts back together they had to put long pieces of steel plate welded to the bottom side of both of the those arms for reinforcements.
Looking at the Sany it appears mostly if not all machine welded. Not sure what may of happened on the Cat machine. I've seen some rust on some grey market machines that had salt exposure but my previous JD 27C and the new Sany the blade is a lifting point and I'd trust them to stay attached.
Nice informative walk over thanks but spit that jolly rancher or whatever out.😖
How much did you spend on this excavator? And how did you get it imported?
My Sany was made in Georgia. There is a USA dealer network and they are made here. Yanmar engines, Italian Hydro. The price I'm sure is elevated at the moment but I paid around $43k.
Looks like a tag coupler
Buckets and coupler are all paladin . Wain Roy style. From the markings looks like they make them for Sany America.
$13-$17,000 cheaper but how much was the machine
IWith cab they were around 43k delivered. This price likely recently went up some because of global supply issues and inflation. Best to just give your local dealer a call. It's a no haggle price and usually on the machine at Sany dealers.
How much cost one ?
This was purchased pre inflation at around 43k.
What is the password to get into the system settings? I want to see what the flow rates are set to...
No password needed.
How much was this machine
Back then they were in the low 40's now in the low 50's depending on options.
Why didn't you say the price
It's usually bad practice but it's been a while now and economy has changes. I paid in the low 40's. Same machine today is closer to 50k or just above.
Whats the cost on something like this
40-80k depending on brand and options.
Maybe they can start reading some comments before they ask for the 100th time how much it cost.@@ShaneBurrell1
HEATER ??
It has heat and AC.
THANKS SHANE
No problem.
I prefer machines built in Japan, sany is made in China. 6k more you could purchase a kubota or takeuchi with much better resale value. Like money in the bank and you get a better built machine. These days equipment holds its value
I like Kubota and Tak but there has been no supply of those for a while now and at the time the prices quoted were significantly more than 6k difference with a long unknown wait on delivery. I was able to find Deere but not a cab version.
@@ShaneBurrell1 I'm in the situation regarding Tak.
@@jonathanbeam6898 The sany is usually available on dealer lots and I don't regret going to Sany for the mini. It's been a great dependable machine.
Sorry friend! I wanted to know how to operate the machine, not open the windows. This video taught me nothing useful.
Learn to not say um um um ummm
Chinese excavator - dislike.
Cheap Chinese Cat Knock off!
lol, definitely just pissed you didnt buy it. overpriced cat will not do any better just costs more
The Chinese communist party thanks you for your purchase
That machine is from a company based in CHYNA!! No way they are getting my money that way.
Unfortunately, they will likely see your money regardless of what brand you buy. My particular Sany was made in Georgia. The bucket and quick coupler is by Paladin. Most of the controls and hydraulics are Europe made. John Deere, Case, Agco and all major players have factories in China. There isn't a machine you can buy these days that won't happen with, but at least in the Southeast if you buy a Sany some of that money is supporting a working family in Georgia as they have a major manufacturing plant there in Peachtree City.
Well then you prolly won't be buying any new tractor these days. Just saying....
@The Richest Man In Babylon Kubota as of 2013 is having their engines made and other parts in china.
Company name Kubota Engine (WUXI) Co.,Ltd.
Location Wuxi city, Jiangsu, China
@The Richest Man In Babylon LOL WHAT ABOUT YOUR TV
even F35 has Made in China parts.