Abilene Machine Remanufactured - 466T John Deere Longblock
Вставка
- Опубліковано 8 лют 2025
- As with all of our remanufactured products, Abilene Machine takes great pride in our remanufactured longblock assemblies. To insure years of trouble-free operation, all components are thoroughly cleaned and inspected before assembly.
Blocks are align bored, the deck is resurfaced, and the sleeve counter bore is recut to guarantee they fall within OEM tolerances. Connecting rods are resized and the center-to-center dimension is corrected. Your longblock contains either a new or a reconditioned crankshaft (depending on availability) and is assembled using only the finest namebrand parts on the market today.
Our quality control program dictates that specifications, tolerances and cleanliness are checked and rechecked during final assembly. As a final precaution, all remanufactured longblocks are wrapped in plastic to prevent contamination. We're so confident of our remanufactured longblocks that we back them with a one of the best warranties in the business.
Our Longblock Assemblies Include:
•Fully Machined Cylinder Block
•Reconditioned or New Crankshaft
•Reconditioned Connecting Rods & New Rod Bolts
•New Pistons & Sleeves
•New Rod, Main & Cam Bearings
•Remanufactured Oil Pump
•Reground Camshaft & Lifters
•Reconditioned Cylinder Head
•Remanufactured Oil Cooler
•New Gaskets & Seals
Thank You for Watching and Have a Great Day.
Special Thanks to Elsa Rhae Productions®
I've spent money with you guys before. Its been all good every time.
Best video sharing sir ,greetings know me from malaysia 👍👍🙏🙏🙏
A bit of nostalgia here. I worked in the plant where that engine was made. Of course is goes together a bit differently there.
Waterloo Works?
Yes, Waterloo Engine Works.
@@gonerydin4225 বাংলা ভিডিয় দেন
Thank you everyone for the comments and likes! First, want to say that this video was highly edited for time purposes and not all the rebuilding is captured here. Nonetheless I hope you enjoyed the video and have a good day!
Great job even though it is speeded up. Nice to watch a master engine builder at work.
Very good job sir 👍👍
This is marvelous, I would like to be full time member of the car career building with all the tools necessary also distance studies as already a mechanic working in the government of Zambia.
Vvv nice
Nice one sir
Checking liner protrusion with one bolt holding liner down?
Great video . I'm about ready to do a major overhaul on my 3010 gas. I'm in the process of modifying one of my engine stands to support this thing. Two uprights and heads on both sides. Now I know about how far up the block the pivot points need to be for this thing to balance right on the mount rails.
مرحبا
Great vid !
Excellent
So beautiful fx
why do you put on and take off the bearing caps
Great video🎥 God bless you brother
تحياتي يافنان من مصر ام الدنيا
Good luck bro l like
very good
I love this
nice asemble biro
A couple things the timing of the cam normally the key way is up or down for TDC ? I see you didn't have the flywheel on to help with your timing . Gee I enjoyed that vid bought back good memories spend 34 yrs servicing Green
dudekiwi the camshaft is timed to the crankshaft using two marks on either gear on the front of the engine, when they are lined up.
Sgdurdhtshe
Great video
How can the guy adjust the valves on all cylinders without rotating the engine ?
michaelovitch John Deere valve timing sequence can be set with 2 revolutions of the engine when using the manual.
dudekiwi
ok
but here it doesn't even move.
exact, excellent observation, also the sequence of tightening the head bolts is wrong
michaelovitch y how kju h! &ii
michaelovitch
6 cylinder piston super worker
570
@@sohalsohal4131 yyn.8
Na koji zazor se steluju ventili na motoru 6466
Would have been nice to spray the block with John Deere colors. - To match all the fantastic work done here.
धन्यवाद
فيديو رائع وممتاز
także panowie przed żniwami bieżemy się za Andorię:)
Super.
ماشاء الله ربنا يديك العافية
does anyone else notice him not measuring a few of the valves @8:29-8:58 ?
The video is highly edited due to the length of the original video. As a consequence parts of the video will be missing.
Abilene Machine, Inc. Song name? Nice job by the way!
MrAganger b
30 45 60 90.
Please engine fiaring and timing mark setting thank you sir 🇧🇩🤝
.
@@jessarabago8121 📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
📚🅱📚📚📚🅱📚
📚🅱📚📚📚🅱📚
📚🅱🅱🅱🅱📚📚
@@jessarabago8121 boink
@@jessarabago8121 nostalgic
🍸🌹🌹🍸🌹🌹🍸
🌹🌹🌹🌹🌹🌹🌹
🌹🌹🌹🌹🌹🌹🌹
🍸🌹🌹🌹🌹🌹🍸
🍸🍸🌹🌹🌹🍸🍸
🍸🍸🍸🌹🍸🍸🍸
🍸🍸🍸🌹🍸🍸🍸
🍸🎁😊❤☺🎁🍸
☁🎈🎈☁🎈🎈☁
🎈🎈🎈🎈🎈🎈🎈
🎈🎈🎈🎈🎈🎈🎈
☁🎈🎈🎈🎈🎈☁
☁☁🎈🎈🎈☁☁
☁☁☁🎈☁☁☁
✨💎💎✨💎💎✨
💎💎💎💎💎💎💎
💎💎💎💎💎💎💎
✨💎💎💎💎💎✨
✨✨💎💎💎✨✨
✨✨✨💎✨✨✨
☁😘😘☁😘😘☁
😘😘😘😘😘😘😘
😘😘😘😘😘😘😘
☁😘😘😘😘😘☁
☁☁😘😘😘☁☁
☁☁☁😘☁☁☁
☁😘😘☁😘😘☁
😘😘😘😘😘😘😘
😘😘😘😘😘😘😘
☁😘😘😘😘😘☁
☁☁😘😘😘☁☁
☁☁☁😘☁☁☁
☁☁🎈🎈☁☁☁☁
😊😊👀😊🌛☁☁☁
😊😊😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁🎈
☁☁😊😊😊😊😊😊
☁☁😊😊😊😊😊😊
☁☁😊☁😊☁😊😊
🌾🌾😊🌾😊🌾😊😊
☁☁🎈🎈☁☁☁☁
😊😊👀😊🌛☁☁☁
😊😊😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁☁
☁☁😊😊☁☁☁🎈
☁☁😊😊😊😊😊😊
☁☁😊😊😊😊😊😊
☁☁😊☁😊☁😊😊
🌾🌾😊🌾😊🌾😊😊
✨🌾 🌾 🌾
😏😏😏😏😏
😏😏😏😏😏😏😏
😏🕓🕓😏🕓🕓😏
😏🕓🎱😏🕓🎱😏
😏😏😏😏😏😏😏
😏😏😏✔😏😏😏
🌀😏😏😏😏😏🌀
😏🌀😏😏😏🌀😏👍
👉🌀🌀🌀🌀🌀🌀
🌀🌀🕐🌀🌀🌀🌀
🌀🌀🕐🕐🕐🌀🌀
🌀🌀🌀🌀🌀🌀🌀
🌀🌀🌀🌀🌀
👟 👟
✨🌾 🌾 🌾
😏😏😏😏😏
😏😏😏😏😏😏😏
😏🕓🕓😏🕓🕓😏
😏🕓🎱😏🕓🎱😏
😏😏😏😏😏😏😏
😏😏😏✔😏😏😏
🌀😏😏😏😏😏🌀
😏🌀😏😏😏🌀😏👍
👉🌀🌀🌀🌀🌀🌀
🌀🌀🕐🌀🌀🌀🌀
🌀🌀🕐🕐🕐🌀🌀
🌀🌀🌀🌀🌀🌀🌀
🌀🌀🌀🌀🌀
👟 👟
🎈 Happy Birthday!
🔥 🔥 🔥
📍 📍 📍
📍 📍 📍
🎂🎂🎂🎂🎂🎂🎂🎂
🎂🍓🎂🍓🎂🍓🎂🍓
🍓🎂🍓🎂🍓🎂🍓🎂
🎂🎂🎂🎂🎂🎂🎂🎂
🎂🎂🎂🎂🎂🎂🎂🎂
I Love Sea!
☀☀☀☀☀☀☀☀
🌴👙🐚🚣⛵🌊🚤🏄
🌊🐳🐟🐙🐬🐠🐬🐋
Muy bonito él trabajo q hacen
Nice
Vary good
👍👍
My name is Philip Obonnaya I'm an engineer industrial engineering I want to acquire more wisdom how can I use and join the group please
super
Was it just the way I was taught or something but I was taught not to use impacts when tightening bolts that go to the piston and crankshaft. Was I taught wrong?
no you are very much right bro..it should not be torqued by gun.....very easy to Crack...
Thank you.
You can use ordinary impact gun but you need to limit torque (if possible) simply as a way to speed up the work, just to loosely tighten the bolt and then you must use manual torque ratched to tighten bolts to desired value,. Profesional impact guns can be set and calibrated to desired torque, that kind of tools is for example used on production lines. If you look closely, in this video he is doing just that. YOu can do it with ordinary cheap impact too, just reduce presure and impact will have low power, enough to screw the bolt in but not to tighten it.
Jason Eads I use mine with the power set to minimum. I run the bolt down until it just kisses the head. Then step torque in sequence until final torque is reached.
Jason Eads оьто
Postoji li drugi kanal
No
Vary good tata
أريد اعرف من احسن محرك برنيوم 340 .2. كلاص .6. كلاص
What is a red preparation added to lubricating ????????????????/
Heniek 977 assembly lube google it
Como tu concegue trabalhar tão rapido?
Joao Onivaldo De elo
Good
જય જય ગરવી ગુજરાત
nise
ستمروبهاذا العمل
3.00 -3.04 mua ở đâu
very very goood
alguem sabe onde arrumo uma cinta de aneis dessa?
good luck
When tightening the head, I follow the repair manual bolt tightening sequence. Every one I have ever seen starts from the center and works out. Perhaps its another sequence with John Deere.
On the assembly line they are all torqued simulataneously. So are the main caps.
fenx1200 9
You don't start at the center and work out on that engine. You start at the left rear and go around the perimeter, and then come back to the center and do the inner bolts. So, for this engine - your assumptions are wrong.
fenx1200 .
fenx1200 mm
ليش العرب ما عدهم هيج صناعات
What reason to apply scotch at end of assembling?
nice warking
what is the torque of the crankshaft
Charly Rocha อิเสะะะถคต'''!@@'
150 ft. Lbs.
ऐ कौनसा गाडी का है,
Oh.good job I too like to work on that kind of line .if any vacancy pliz contact us
No sir we need a slow video
Yeah is a little too fast
What happened to torque sequences.
or cross hatch honing
Gary Mc Donagh hola tengo un huni 500 pasa agua a un inyertor como puedo checa como quutarla
Palimino Soto
Mahesh Gujarat se bol raha apna fast video banate hain ki meri samajh mein nahin
👁💯🤙
I know she ain't half the time in my chair song
How to cook a hamburger at 11
Peace be upon you, Professor. I have a question on the car. My generation Ck. I have bubbles appearing with it in the radiator. I replaced the cassette 3 times. The machine is clear and smooth. Strong pulling from the cooling off. Returns the text. Normal. Professor The driver did not switch.
does anyone know Hp for a John Deere 6- 466T thanks
around 180 HP
You can push 200 out of them. After that you risk twisting a crank.
تمام
hmm sure thats not a 6081?
Eric Price definitely a 466. The cam driven oil pump is specific to the 400 series 466, 404. Plus the 6081 (450 series) block is a bit different look that.
Rahul Makrani
When installing AR55394 engine oil cooler, does the (2) R51053 tubes have too be installed at the same time ? Reason for asking is that I need to replace both of R51053 tubes on my JD7720 Combine. Can I install the tubes without removing R51283 cover ?
мастер 👍👏
j'aimerai être mecanicien poid loud camion
منورين
منورين شنو ههههههههههههه
Cool
Да что это за ремонт трёх метровой трубы даже нет.
Yeah, no . . . a few corners have been cut during assembly, anyone with a decent engine building background can spot it. Nice to watch but not the best of techniques and procedures.
JIGA BACHI what would u do differently?
مذهل
montador.de.motor.
Hi
slow motion me
Ok
nie ustawił wszystkich zaworów
Nissan x trail
Wiring menual data videos
Tata commins piston roping
Seraj
খক
Give me BS 4 trainte
700
faijul
john.deere.motor.bom.
It
Adam and Eve Islam
hmmm
1
Souley