This video is exactly what I needed, fully disassembled and have never managed to get it back together properly, but now I can. I was so close to having to buy another one, but didn't want to as it was in such good condition still. Thank you!
Thank you good sir, you’ve saved me from throwing this cap across my kitchen! I’ve put this thing back together about ten times the wrong way before finally admitting I needed help. You are my salvation 🙏 A thousand thank you’s and happy new year from a happy Canadian! 🍻 *Again, I’ve referred to this expert instructions and it’s saved me frustration! Remembering to remove the seals and flip the bottom disc to lock it. Thank you again!
This is the best video out there to show the details on disassembling and putting this lid back together. Looked at several others before I found this one. Thank you!
Thank you for this! Couldn't find a full disassemble on any other video, helped me finally put it back together after taking it all apart a bit too fast
Both of my 5 year-old Thermoses finally shit the bed--I went to disassemble the lids to clean them and when I backed out that small screw the plastic simply came out with it! That's as far as I got, so thanks for confirming that I'll simply finally need to replace them... although I may just try filling that stripped hole with JB Weld and re-screwing.. we'll see how impatient I get. 😂
This helped a lot. So many partial dis/assembly cleaning videos but nothing that showed how to put the center part of the lid back together after a full disassembly to clean or replace parts.
Wally near me stopped selling this model, found a replacement but the diameter of the new one is much larger and the system isn't as air tight. I should have bought as many as I could find when this one was $ 10 bucks on clearance.
I learned to disassemble my lid with the help of this vid. Thanks! Also, i believe you are Tom Hanks coz you sound like Him. There is no bad Tom Hanks movie. Thank you for those too! :D
Really thorough and well done video. I see Thermos only sells 3 main replacement gaskets. I like how the mug works but wonder how sanitary it is when bacteria can sit in the very innermost parts of this mug as most folks would not even take it all the way down. Anyway Thanks for the very good video instruction.
The ring with the wording has a locating groove as described. The groove is small and easily missed. The ring can be installed out of that groove as it incorrectly was on my new mug. It will then deform the ring slightly. When I cleaned my lid and installed the ring correctly, I found that the wording, open/closed, were around the wrong way. Nothing I can do will make open and closed be in the correct position. I think it must be a printing error. So for me, open is closed. Not the biggest problem in life but..... Reply
Thank you so much for the video. Do you know if the silver ring on the mouth piece comes off? I believe I have water trapped behind the silver ring. When I shake the lid I can see water where the silver part meets the black plastic.
Thank you Greg.
This video is exactly what I needed, fully disassembled and have never managed to get it back together properly, but now I can. I was so close to having to buy another one, but didn't want to as it was in such good condition still. Thank you!
Thank you good sir, you’ve saved me from throwing this cap across my kitchen! I’ve put this thing back together about ten times the wrong way before finally admitting I needed help. You are my salvation 🙏 A thousand thank you’s and happy new year from a happy Canadian! 🍻
*Again, I’ve referred to this expert instructions and it’s saved me frustration! Remembering to remove the seals and flip the bottom disc to lock it. Thank you again!
This is the best video out there to show the details on disassembling and putting this lid back together. Looked at several others before I found this one. Thank you!
Thank you for this! Couldn't find a full disassemble on any other video, helped me finally put it back together after taking it all apart a bit too fast
Likewise, I put the spring in wrong and turned it into a portable cannon LOL
Excellent, thank you very much.
Both of my 5 year-old Thermoses finally shit the bed--I went to disassemble the lids to clean them and when I backed out that small screw the plastic simply came out with it! That's as far as I got, so thanks for confirming that I'll simply finally need to replace them... although I may just try filling that stripped hole with JB Weld and re-screwing.. we'll see how impatient I get. 😂
Finally found what i was looking for 6 months ago. Thank you!
My man! You're a lifesaver. Thanks very much!
Great work! Thank you for this!
Thank you so much for sharing this! I've been looking for this!
Thanks for posting, was able to get my lid working again
Amazing amount of work you did-nice closeups!
This helped a lot. So many partial dis/assembly cleaning videos but nothing that showed how to put the center part of the lid back together after a full disassembly to clean or replace parts.
Wally near me stopped selling this model, found a replacement but the diameter of the new one is much larger and the system isn't as air tight. I should have bought as many as I could find when this one was $ 10 bucks on clearance.
I learned to disassemble my lid with the help of this vid. Thanks! Also, i believe you are Tom Hanks coz you sound like Him. There is no bad Tom Hanks movie. Thank you for those too! :D
Great work, sir. Appreciate it!
this was so helpful. thank you
Bro thank u soo muck u saved me a headache
Really thorough and well done video. I see Thermos only sells 3 main replacement gaskets. I like how the mug works but wonder how sanitary it is when bacteria can sit in the very innermost parts of this mug as most folks would not even take it all the way down. Anyway Thanks for the very good video instruction.
The ring with the wording has a locating groove as described. The groove is small and easily missed. The ring can be installed out of that groove as it incorrectly was on my new mug. It will then deform the ring slightly. When I cleaned my lid and installed the ring correctly, I found that the wording, open/closed, were around the wrong way. Nothing I can do will make open and closed be in the correct position. I think it must be a printing error. So for me, open is closed. Not the biggest problem in life but.....
Reply
Thank you so much for the video. Do you know if the silver ring on the mouth piece comes off? I believe I have water trapped behind the silver ring. When I shake the lid I can see water where the silver part meets the black plastic.
Great video, thanks for the info. Do you happen to have a link for the kit that you had mentioned, that would be awesome. Thx...👍😎
I'm not doing all this. Just no way.