This car is sick. My s550 3.7 is finally paid off, I got it 5 years ago as my first car. Boost seems way more fun than trading it in, so I bought a used P1SC-1 kit. I have friends with boosted 5.0s & hellcats, but they're in 30k+ of debt. And the best part. Me? Zero. 🎉
I’ve seen this video lots of times, I never paid attention that you mentioned 12-14 was everything. Figured it’s was just the turbo install, not wheels suspension drive shaft, brakes. I see good things coming your way auto mafia racing.
And I thought my souped up F 150 long box was quick. My 3.7 has a 40 flow master and open air box with K&N panel, a 1 inch TB spacer, some hot coils, and a Vertex performance plug and play chip. It was fast stock but now it's a rocket. Goes through six gears like a motorcycle. Lots of fun to drive
By the way I run non ethanol super unleaded in my truck and my mileage is 18 to 21 on the hyway and around 16 in town if I drive right. Pulling trailers loaded I get around 13 to 14. Long box 4x4 reg cab with 3.7 N/A
Im following everything you post man I believe there's 1 or 2 steps your going to do before forging the engine right Don't rush into forging we wanna see how far the stock engine will go before booming
Was hesitating between a 05-10 gt or 3.7. Yeah I know the 4.6 v8 has a rumble the 3.7 won't ever have but the bargain becomes more and more appealing!!
Yes we sell forged internals for them. 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com facebook.com/automafiaracing
@@automafiaracing right?! Crazy. Be a rush from hell. I’ve never raced but I’d like too. I go every weekend as a spectator and I gets rush just from watching.
Auto Mafia Racing yea I had it in the 10’s last year till I blew the motor lol I’m building a motor now powered by Super Six Motorsports.... I’m not stopping at 9’s
We would sell the car for $25,000 as is with no motor or trans or turbo kit if that tells you anything. Its got $10k in suspension and fuel system alone
We were pushing for a record on a stock 200,000 mile motor. We count this stock motors as very stout and will run quite a long time at 600 ish rwhp and below on boost with a good tune and taking care of the car and running good fuel. We are now installing just rods and pistons and new rings and bearings in another 150,000 mile junk yard motor and we will see how much hp it can hold and see if we can hit 8s now. :)
Hi guys I'm from Barbados we have drags down here but I have a Ford explorer sport trac 2003 4.0 L V6 wat can I do to get in the 10.s I wat to have the fastest truck down there.
Ok will do how much psi to go up to for the first time I'm going to cut out the door panels out with the seats AC the hole 9 yards I have a extra one to do it with.
Hi, this is awesome what u guys have done. My question is the amount of money it cost to go 9s with the 3.7 why not just use a coyote 5.0 and goes 8s with a stock engine for cheaper. Just my 2 cents.
Short answer because thats boring. Also remember that the price difference in the CAR itself is about $10,000. But also look at how we built the car. We can swap to a different motor at anytime and still have a full race chassis and fuel system and suspension. We love going fast in cars that people think should be slow. But blowing up a $500 v6 motor is no big deal. Compare that to blowing a $5,000 coyote.
Auto Mafia Racing Ok i see. I dont know if its considered boring or not. But my race weight at 4080lbs completely full leather interior and everything that came from the factory with twins and a fuel system had less than $9000 in parts with full front tires that runs 8s all day with no effort feels like a win. not to mention completely stock suspension. So i would with a little effort it can go much faster. But yes your correct blowing up a $500 isnt much money. But then again i bought a complete coyote engine for $1000. But i get your point that a v6 can do 9s if someone want to invest enough money and time into one. Keep up the great work.
Dude that’s awesome ! It’s cool to see someone that cares about the V6 community !
We really do care ;)
How much is the the complete turbo kit for 2014 3.7?
@@adamcody2901 $4999
This car is sick. My s550 3.7 is finally paid off, I got it 5 years ago as my first car. Boost seems way more fun than trading it in, so I bought a used P1SC-1 kit. I have friends with boosted 5.0s & hellcats, but they're in 30k+ of debt. And the best part. Me? Zero. 🎉
Amen
Where did you find a pre owned kit
We sell new ones. Sometimes people have us sell their used kits
I got one of your 80mm throttle body adapters for my 3.7L V6. It is very fine quality and beautifully finished.
Great to hear! Thanks for letting us know!
I'm spreading the word on every channel that talks about the 80mm TB mod.
Awesome
Cool video. Cool series too. Nice to see a 3.7 layin' it down.
Thanks! We will be back at the track with it soon
Killing the 3.7 v6 game
We try
I’ve seen this video lots of times, I never paid attention that you mentioned 12-14 was everything. Figured it’s was just the turbo install, not wheels suspension drive shaft, brakes. I see good things coming your way auto mafia racing.
Rock on
Yall deserve more views, I'm saving up for an AMR kit for my 3.7. Hope to see yall soon
we agree and thank you!
And I thought my souped up F 150 long box was quick. My 3.7 has a 40 flow master and open air box with K&N panel, a 1 inch TB spacer, some hot coils, and a Vertex performance plug and play chip. It was fast stock but now it's a rocket. Goes through six gears like a motorcycle. Lots of fun to drive
By the way I run non ethanol super unleaded in my truck and my mileage is 18 to 21 on the hyway and around 16 in town if I drive right. Pulling trailers loaded I get around 13 to 14. Long box 4x4 reg cab with 3.7 N/A
Very cool but that thing is slow haha. Needs our turbo then it will be fun
Vertex chips don't do anything, get like an sct tuner and then it will.
Good shit, man. Good shit!!!! 🙌🏼
Thanks
Insane! But unique, and phenomenal as well. Very cool break down.
Thanks
Cool vid. There will be one more fast 3.7 - but in Poland. Ecoboost turbos, forged, ported. Can't wait, can't wait.
Sweet let us know if you need parts or tuning
Im following everything you post man
I believe there's 1 or 2 steps your going to do before forging the engine right
Don't rush into forging we wanna see how far the stock engine will go before booming
Oh we wont dont worry. We will posr a video of our plans for the car here aoooon
sounds like a dream
It was fun
Was hesitating between a 05-10 gt or 3.7.
Yeah I know the 4.6 v8 has a rumble the 3.7 won't ever have but the bargain becomes more and more appealing!!
Well you can have a rumble or you can be faster without building the motor.
The 05-10 GT is more affordable then the 3.7 though at least from what I’ve seen.
They are starting to look that way
What advantage does welding the UPR anti roll bar to the rear do for the car? Is it not a bolt on?
No it's a weld on. They make a bolt on one now tho. It keeps the rear end from moving. Super flat launches
Nice work getting the number, but are you going to run a turbo that will fit under the hood? Those exhaust pipes just look....well, not very good.
The turbo fits under the hood no problem. We keep it off to show its a V6.
Awesome awesome 👏🏻. Time to save up now!
Thats right!
Do you know who makes forged internals for these motors?
Yes we sell forged internals for them.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
What ecu are you using?are you using the phasers?
We are using a Haltech Nexus R5
@@automafiaracing alrighty,I knew you were using haltech for barrrraaaaa,wasn't sure on the 3.7😉
Yessir full racecar. So 100% using haltech
where do i find parts to beef up the motor? like rods pistons and such
We sell it all.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
@@automafiaracing how much for stage 3 cam
What’s the suspension set up ?
Did you not watch the video?
1976 capri with 3.7,turbo would be awesome
It would be
That launch was fuckin nuts
Haha that was on like 0 psi...imagine it hooking on 12 psi
@@automafiaracing right?! Crazy. Be a rush from hell. I’ve never raced but I’d like too. I go every weekend as a spectator and I gets rush just from watching.
Yeah in the car is a whole different story
Do you make a kit for a 2013 f150 3.7??
We can make a turbo kit for one yes
What gear ratio you using
It has been a while but I believe it was a 3.31
@@automafiaracing so stock gear ratio
no stock was 2.73
I’ve been trying to save to get my cyclone in the turbo status and run 9’s
good luck there have only been 3 ever to do it.
Auto Mafia Racing yea I had it in the 10’s last year till I blew the motor lol I’m building a motor now powered by Super Six Motorsports.... I’m not stopping at 9’s
@@psychedelicpythons624 how can I build a safe fast/daily v6
We went 9s easily. 8s will be next year for us
Send us a message we have a recipe
What does a build like this cost I know well over 10k
We would sell the car for $25,000 as is with no motor or trans or turbo kit if that tells you anything. Its got $10k in suspension and fuel system alone
I would say 11.7 full weighted which is not bad
Huh
Yea!!!
You asked we posted!
Major props tho
Thanks
My next up grade
What
Boost my mustang
It seems that these mods are not safe for the motor. Good power overall but what's the point if it's going to blow up.
We were pushing for a record on a stock 200,000 mile motor. We count this stock motors as very stout and will run quite a long time at 600 ish rwhp and below on boost with a good tune and taking care of the car and running good fuel.
We are now installing just rods and pistons and new rings and bearings in another 150,000 mile junk yard motor and we will see how much hp it can hold and see if we can hit 8s now. :)
What gears
3.08 with the turbo.
This C85 fuel . Is it 85 % ethanol and 15 percent nitromethane ?
We add meth in everything.
Hi guys I'm from Barbados we have drags down here but I have a Ford explorer sport trac 2003 4.0 L V6 wat can I do to get in the 10.s I wat to have the fastest truck down there.
Turbo it and forge the motor.
Ok will do how much psi to go up to for the first time I'm going to cut out the door panels out with the seats AC the hole 9 yards I have a extra one to do it with.
10
🤘🏼
rock on
A 3.7 F150 build would be funny.
ill pass unless someone else is paying lol
Im actualy doing it rn i got a 2013 xl regcab 3.7 na, planning on throwing the 3.5 turbos on to it and 3.73 gears
Weve tuned a couple like that
My 2011 3.7L F150 been procharged for 4 years. Imo waste of money
Must not have done enough boost
E85 allready eats away the gaskets on the motor (stock )
It does youre correct. We have no factory fuel lines left.
I need turbo headers
We have them
Hi, this is awesome what u guys have done. My question is the amount of money it cost to go 9s with the 3.7 why not just use a coyote 5.0 and goes 8s with a stock engine for cheaper. Just my 2 cents.
Short answer because thats boring. Also remember that the price difference in the CAR itself is about $10,000.
But also look at how we built the car. We can swap to a different motor at anytime and still have a full race chassis and fuel system and suspension.
We love going fast in cars that people think should be slow. But blowing up a $500 v6 motor is no big deal. Compare that to blowing a $5,000 coyote.
Auto Mafia Racing
Ok i see. I dont know if its considered boring or not. But my race weight at 4080lbs completely full leather interior and everything that came from the factory with twins and a fuel system had less than $9000 in parts with full front tires that runs 8s all day with no effort feels like a win. not to mention completely stock suspension. So i would with a little effort it can go much faster. But yes your correct blowing up a $500 isnt much money. But then again i bought a complete coyote engine for $1000. But i get your point that a v6 can do 9s if someone want to invest enough money and time into one. Keep up the great work.
What are you talking about 4k car with twin turbos that runs 8s?
Auto Mafia Racing
Not sure where u got $4k i spent less than $9k on my car and it runs 8s all day @ 4080lbs. Look it up on LPF youtube. Silver s550
@@larryle321 we sell LPF i know what it is. Which car is yours? It takes more than just an LPF kit to get to the 8s
That is not naturally aspirated if you have a super charger or Turbo
We know. We also have the naturally aspirated world record.
Pulleys!!
Its a turbo
Going that fast shouldn't you have a cage?
Short answer, yes
Yes. We are getting a cage put in it.