Just completed this job 15 minutes ago. Unfortunately, not until I already spent $150 on the new sensor from dealer. The tonal ring from the dealer was only $40 and would have fixed it without the sensor as it was separated lying inside back of axle carrier. I have a lift and some experience, and this took just under 3 hours. Getting the axle out of the knuckle is a total bitch that took 2 people and a pry bar. Thanks for posting this video gave me great guidance.
Great shown, especially with what tools should be used to complete before work, you could have suspended the brake shoes and not so that they hung on the hose. Overall great shown.
Happy to see that my favorite saab and Volvo mechanics are now working on Mercedes too. Keep up the good work.
10 years pass.....A few Saab cars on the road. Thanks.
Just completed this job 15 minutes ago. Unfortunately, not until I already spent $150 on the new sensor from dealer. The tonal ring from the dealer was only $40 and would have fixed it without the sensor as it was separated lying inside back of axle carrier. I have a lift and some experience, and this took just under 3 hours. Getting the axle out of the knuckle is a total bitch that took 2 people and a pry bar. Thanks for posting this video gave me great guidance.
Thanks for sharing your experience.🙂👍
This is absolutely fantastic, thank you for taking the time to do this upload ❤
Welcome!👍
Good presentation.😊
Thanks!
Hello. Thanks for sharing. Is the ring the same for R350?
No, it is not the same.
Great shown, especially with what tools should be used to complete before work, you could have suspended the brake shoes and not so that they hung on the hose. Overall great shown.
Thanks!👍
@@saabmastertech5852 Do you know the tightening torques for the wishbone bolts?
@@andrzej5484 In my opinion 80Ft-lbs is enough.
@@saabmastertech5852thanks, but there was no need to disassemble the wishbones, but the sensor itself was damaged ;)
Very informative. Thanks.
You're welcome!🙂👍
you made it look easy.
🙂👍
Super Video
Thanks!👍
Nice work very helpful 👍🏻
The disc has seen better times too
I replaced on e320 2003 mercedez Benz now is stuck on first gear :( just happen today
Did you reset all DTCS after the repair?
I don’t think so
Not sure how’s that done all I did was replace the ring & clean speed sensor now the need won’t shift down 😒