Це відео не доступне.
Перепрошуємо.
Extended Mag for M&P Shield 9MM
Вставка
- Опубліковано 9 лип 2015
- A quick review showing the fit and quality of the ProMag industries 10 rd mag for the Shield in 9mm. I ran into some problems with the spacer being too large not allowing the magazine to probably seat itself into the mag well. With a little bit of sanding fixed this issue. With a few sharp edges and a slight lack of texturing the mag is still worth its $28 in cost.
promagindustri...
Thanks for doing this. You just saved me from making a $15 mistake. After watching, I pulled this Promag out of my cart at Midway and added back the 8 round S&W factory mag. Unfortunately those cost $10 more but I'm pretty certain I will not have to file it down to get it to fit or return it.
+Robert DeMilo Sweet man, I'm glad I could help you out even if you didn't want the mag.
Seems this is the only video Ive been able to find,...thanks for puttin this up !!.
+Eric “PoorManPrepper” K That's why I put it up, rock on man.
Where can you find this
promagindustries.com/smith-wesson/623-smi-28-smith-wesson-shield-933-10-rd-blue-steel-magazine.html
I had to clear my throat a few times listening to you talking...
does m&p shield make bigger magazines then a 9 round? im looking for at least 15 rounds at least
There’s a 50 round drum highest mag tho I found was 12
I ordered one and when it came I could not fit 10 rounds into it. After calling the company they told me that they had a bad run and would replace it when a new run came in. After the second one came to me it also would not fit 10 rounds. They agreed to have the next one they sent me "tested" by the the support folks. It got here yesterday and it did fit 10 rounds, but it was very difficult to fit the last two rounds. I think maybe the spring and follower may need some further engineering to fix this.
from a fellow Adam! Thanks! going to hit the range and see how they do! thinking about stippiling, cheap and easy
Personally I don't think I could show enough footage for you to get that idea. I have never had a failure to feed with the shield and certainly not when I was using the promag. I will consider it when I go home on leave over the holidays otherwise I don't have it at my current station.
u should make a video of u shooting your shield with the pro mags, I'm really curious if they are reliable
For making the statement that they could be used in a combat situation was a statement toward their quality not their application in one (round capacity, weapon size, etc). The quality of the magazine's are better than those issued to be used in combat from my experience. To make it more clear, the shield isn't a combat practical weapon so the magazine made for them can't be either.
Very helpful thank you
Man the vocal fry is nuts in this video
You have to admit though, it makes him sound more intelligent 🧐
A good solution for that mag will be some sanding and just put talon grips and you will be fine... nice vid ;-)
Thank you for sharing!
Adam, thank you for sharing this video. Can you clarify the following statements you made please:
" I'll tell you they are way better than what I can given to use in a combat situation so yes."
They are way better than what I WAS (?) given to use in a combat situation? Or is this a hypothetical 'can be given to use..."?
"Practical use for them not really"
What does that mean? Didn't you just say they made/can make a lot of practical sense being used in a combat situation?
Thank you.
I have the .40 and I can't find a longer mag other than the 7 round
can you remove the fat spacer so it looks like the clip is hanging out like you can do with the pinky extension one?
You can remove the spacer on the magazine so you will be able to see the metal portion of the magazine extending from the base of the grip.
They are there for a reason if you take it off you can over push the round
So this will fit my M&P sheild ?
Shotz Cowan Yes, clearly shown in the video.
Adam Holm where did you get it from ?
Direct from promag industries.
promagindustries.com/smith-wesson/623-smi-28-smith-wesson-shield-933-10-rd-blue-steel-magazine.html
Bought 2 for my bodyguard, same BS wobbly spacer issue. Mag fits & locks fine but spacer moves all over hell and back while you are shooting. Doubt I buy any for the shield, probably just go with magguts +1 kits.
HEY GUYS,,WHAT'S A GOOD SPRAY PAINT/BRUSHLESS PAINT IS GOOD TO USE TO COLOR THE BOTTOM OF THE MAGS/ETC!!?? THANKS ALOT!!AND WHAT'S THE WHITE PAINT I NEED SO I CAN COLOR IN THE WRITING ON MY PISTOL!!ANDS ALWAYS THANKS VERY MUCH FOR YALLS TIME/HELP!!!
Bought 2 of the 10 rd mags for $15 each. Total crap. Doesn't lock in easily and is almost impossible to fill mag with 10 rounds.
I'll stick to factory mags from now on.
Did you have any problem inserting the magazine with the slide back?
UncleJ4 Not at all
I've noticed that with the slide back it is much easier to insert the magazine.
After watching this, I'll stick with the factory mags, unless I find it REALLY cheap!
what magazines are those called? I'm trying to find 17 round mag for my M&P Shield
Not quite sure on the name and I can't check as I don't have the packaging with me at my station. I also doubt they would make a 17 round mag for it, you would run into feeding issues with the amount of the magazine be unstable (not in the mag well).
No 17 round mag for shield the mag your looking at is a 10 round pro mag
I have feeding issues for mine I can’t get a whole 10 well I can it just feels so mf tight and won’t feed
Did they fix it ?
Is it difficult to insert when the slide is locked back?
Do the have those for the 40 series ?
+jarrius hill yes
so what part needs sanded?
The spacer that comes with the mag is all.
PROMAGS always jammed. I use only at range.
Never carry.
Where Can I Buy This Clip At Online ?
Anybody Help
you can buy this magazine on midwayusa or ebay
Link included in the description.
I bought one for my 9mm M&P shield - the 10 round version, SMI 28. The first one would not lock in. I had to mail it in, at my expense. The second one only locks 50% of the time without slamming it home. None of my S&W mags have this problem. The spacer does not fit well although the mag is made for the shield. I would not recommend this mag.
As I stated in the video, with slight modification the spacer can work well. Certainly it is up to you if you want to buy the product and modify it so it works 100%.
ProMag. People! Remember? Our Magazines Are Garbage :
Why is there tape on your trigger Guard lol
Rodney Porter Grip for your off hand index finger.
Adam Holm who the hell shoots like that lol
Apparently you've never held a Glock. They all have a groove and grip on the front of the trigger guard.
Adam Holm I have a glock 23 and I have never put my finger up there but each is to there own
Your voice kinda discourages the desire to continue listening. Try clearing your throat, or drinking some water.
I agree but don't let that discourage you. There information was useful and certainly worth a couple minutes of our time.
Dude, get some coffee, snort a line, WAKE THE F*CK UP!
Steve Bachman Real Estate Just my voice. Be glad the video is only three minutes long and I wasn't your college professor.
half asleep while making the video.
+George Aguilar Just my voice man, I get comments about it when I answer the phone all the time.
pro mags are junk
Its called vocal fry. A millennial thing.
u have really small hands you male the gun look like a full size lmao
dude take a no dose.... something ! i about fell asleep writing this