@@charlieward7606 RB20E 4 lug R33 is poverty spec dude. And the mods Jimmy has done are still sparse and low budget compared to most of what he has in the shop.
I’m so happy to see this. My 32 is 4 lug and I plan on swapping 5 lug. I know there are some differences in 32/33 but it should still be close enough. There are, like, 3 forum posts that I have found about this swap.
I’ve had my R33 in this same color for 3 years now! Absolutely love it. Just finished my fully forged RB25 build with Haltech Elite 2500! I need to make a series on my build, but half of my footage went corrupt!
Jimmy Oakes the one of the few youtubers that you can relate to in real life and the most down to earth ! cheers to you and your buddies what an amazing human being
jimmy, love from aus, fyi if you run an 18" wheel the highest tyre profile u can run is 40, a 45 will rub on upper control arm, perfect wheel specs for a stock body gtst is 18x9.5 +12, keep it up :)
the venting in the vented rotor is what dictates the rotor direction. most vented rotors are bidirectional. in that case direction of the slotting is preference.
Incredible coincidence. I have a R33 GTS25 on 4 lug in black also. I have the Z32 5 lug hubs but the whole bearings that I got were the wrong size too small and smack to myself for not opening them when I first got them so it's too late to return them. Currently trying to figure out if I could get maybe 240 5 lug hubs and save money. Got a guy I know who's been really looking into this business and he actually showed me this video.
The z32 calipers are exactly the same spec as the R33 GTR calipers which is why they are a direct bolt on to the GTS hubs, it is also not super difficult to fit the R35 brakes onto the R33 platform
Skyline is a skyline. Still dope. Wheels look good. R33s are my favorite out of the skylines. They are the odds balls. And I think that's why I like them.
You said you don't care about what side the rotors go, they are made that way for better cooling so when you don't put them in the right direction there's no use for the holes then lol Some are not directional because the vents in the middle are strait so keep that in mind next time you install them
Obviously US didn't get alot of them but was easy to spot a factory na S or R chassis as all non turbo model were 4 stud hubs turbo 5. N bigger brake setups. Not sure this applies to s15 and 34 skylines but did for models before them
You can replace those bearing races if need be, no other then motorcycle headstock bearings really. cut a slot as close to the stem as possible, give it a big whack with a hammer an chisel and it'll break making it fall right off.
“Build your dreams when you can’t afford them”
Yes. Just yes.
I can't afford to build my dreams yet, but I'm trying. Bare shell prices have gone through the roof for most things remotely desirable.
most of the time is going to cost you the same or even more
Hard I agree
@@Gizawar but you can space that price out over time
@@kylecube15 yeah I know but thats why people dont realise its not cheaper
bruh b was friedddd at the end 😂
Classic B 😆
He really was 😂😂😂 fuckin goneeee!!
He was gooone 😂😂 glazie as heck
Jimmy’s daily is most people’s build
Foreal
Jimmy no cap got that big dick energy no cap
Stop attacking me
jimmy also gets paid for what most of us spend all our money on lol
G35 owners be like Y’all don’t want it 🥵
“Welcome to the hydraulic press channel” 😂😂
I'm subbing to him just because he said that lol
Justin a GOD amongst mortals, love that dude
18:27 Brian is high as hell it's great 😂
Lmao
For legal reasons we can say that he is really tired
They’re ALL always high, but Brian is always HIGH AF 🤣
Naw bro he has glaucoma
maybe he was just crying before the camera to the face 🤔
Brian’s cosplay of the Corrado in his eyes is spot on
can comfirm brians colorado cosplay was very much like us
“I’ll leave that to the moistbois”😂😂😂
Glad he mentioned them tbf
yeyeyeye Vancouver Island represent 💪💪🤙
@@b3_e36 he said in like 4 different videos, "im waiting for the moistboys to get back to me when they find the rims"
Last time i saw eyes that red i was lookin in the mirror. Lol
I was looking for these comments. 😂
@@tyrel3664 same 😂😂😂
Jimmy: “this is my daily” also jimmy “ I’ll take the mini truck home” lol 😂
Jimmy: I want to 5 lug swap this car ASAP
Also Jimmy: I don't have any 5 lug wheels to put on this car
Jimmy's poverty spec is still higher end than 99% of Instagram builds
poverty spec means not many extras, not the condition
@@charlieward7606 RB20E 4 lug R33 is poverty spec dude. And the mods Jimmy has done are still sparse and low budget compared to most of what he has in the shop.
@@traxxasslash95 oh i thought you meant condition wise, yea i realise this is a poverty, think we on same side xD
18:34 mans clapped out of this world 🤌🏼🤣
Hey Jimmy, a quick and easy way to tell which way a rotor goes is by the cooling channels in the rotor. It's not always directions of the slots.
So he did it right?
17:56 “GET THE NITROUS!” 😂 please clip that
You sir, have excellent taste in music
Day 2 of asking Jimbo & the bois for a "I love 90's junk" hoodie version.
Immediate cop
my favorite paint code is 'burgundy ass' lmao
My rx7 is burgundy ass
RJ, 3pc BBS LMs are legendary you cannot deny it! They're my dream wheel (work meister m1 as well).
"Build your dreams if you can't afford them" should be new merch
Jimmy should make a sticker of that
Yes!
Bryan and Josh were baked af hahaha
Funny that Justin mentioned Hydraulic Press Channel on Finland's independence day.
ay shout out to the homies in Finland for being all independent and dope af
Brian's eyes tho 👀🍃💨🤣🤣🤣🤣
Happy Birthday Josh for when this was filmed, Jimmy I Love those wheels on the R33 5 lug was worth it now RB26 an some spice trickle an f yeah!!!!
That's the best part about building a car you build what you want. So really it's not fake it's modified. Hell yeah
Brian being high as hell.lol
Lmaooooo Brian and Josh are bakeddddd lmaoooo
These “basic” upgrades are my favourite part about working on cars, factory upgrades are so cool (even tho the brakes arnt)
I’m so happy to see this. My 32 is 4 lug and I plan on swapping 5 lug. I know there are some differences in 32/33 but it should still be close enough. There are, like, 3 forum posts that I have found about this swap.
Justin’s channel is very chill. The guy knows a lot.
Thank you!
@@MorFabIndustries you are welcome.
I’ve had my R33 in this same color for 3 years now! Absolutely love it. Just finished my fully forged RB25 build with Haltech Elite 2500! I need to make a series on my build, but half of my footage went corrupt!
I got stoned just looking at Brian lol
Brake rotors have cooling fins that are directional depending on the manufacturer. Always checks, you could install them backwards and not realize it.
Jimmy Oakes the one of the few youtubers that you can relate to in real life and the most down to earth ! cheers to you and your buddies what an amazing human being
You have the rotors backwards because the vent fins in the middle of the rotor should scoop the air in.
Man this right here is the dream, a shop filled with cool cars and a bunch of good friends.
I would love to watch you guys vinyl wrap this thing when you get sick of the old paint!
A poor man skyline is a still a skyline
jimmy, love from aus, fyi if you run an 18" wheel the highest tyre profile u can run is 40, a 45 will rub on upper control arm, perfect wheel specs for a stock body gtst is 18x9.5 +12, keep it up :)
as far as the rotors it's the direction of the vanes in the rotor that matters
I was so bored I took a tube sock filled it with coleslaw and smacked it on the side of my washing machine.. but then you posted. Thank you
Pics or gtfo
*picture of me doing that*
Jimmy buys lift.
Jimmy uses jack stands.
Your videos are always so positive, i love it!
the venting in the vented rotor is what dictates the rotor direction. most vented rotors are bidirectional. in that case direction of the slotting is preference.
"Welcome to the hydraulic press channel" torille🇫🇮🇫🇮🇫🇮
"Thats a personal issue RJ"
Best burn DJ !!! Hahahahaha
Jim left a nice groove in his floor!
Brian baked af 😆
There are fins on the in side of the rotar to show which way they go
2:55 WHY IS HIS IMPRESSION SO FUCKING GOOD THOUGH?!?!?
Happy Birthday Josh!!!! Happy to see the corrado move especially for your birthday
Incredible coincidence. I have a R33 GTS25 on 4 lug in black also. I have the Z32 5 lug hubs but the whole bearings that I got were the wrong size too small and smack to myself for not opening them when I first got them so it's too late to return them. Currently trying to figure out if I could get maybe 240 5 lug hubs and save money. Got a guy I know who's been really looking into this business and he actually showed me this video.
Happy Birthday Josh!
I loved that Finnish imitation "welcome to the hydraulic press channel" :D
Legit. Gotta love more fab always coming in clutch
Rear hub is a z32 tt the na one doesn’t have the little ear on it. Also use z32 17/16ths master cylinder and the brakes should feel much better
Second time I’ve heard you mention the moist boys. They are dope I feel like there channel deserves more love.
love to see you working on this thing
The z32 calipers are exactly the same spec as the R33 GTR calipers which is why they are a direct bolt on to the GTS hubs, it is also not super difficult to fit the R35 brakes onto the R33 platform
ayyy, happy birthday and first drive Josh!!
Skyline is a skyline. Still dope. Wheels look good. R33s are my favorite out of the skylines. They are the odds balls. And I think that's why I like them.
I agree with RJ for the most part on 3 piece wheels. I've seen some cool 3 spokes but still definitely not my bag. To each their own though!
All this info is all avaliable on forums all the brakes are interchangeable as long as you use the correct rotors Nissan chassis are so easy
Justin's parody of the foreign dude on the Hydraulic Press Channel was spot-on haha. That was amazing.
Those white wheels actually looked really dope. I was never a big fan of them on the s13 but they look fire on the 33 in my opinion
the slots in the rotors are ware indicators.
The rims on that look great.
Always boosting your team up.
You said you don't care about what side the rotors go, they are made that way for better cooling so when you don't put them in the right direction there's no use for the holes then lol
Some are not directional because the vents in the middle are strait so keep that in mind next time you install them
I thought for sure you were gonna go to stay gold. Good to see Justin every now and then on the JimmyO channel.
Nice overfenders for the E36 there in the background Jimbo 💪
Happy birthday Josh🥳 🎉
8:50 if they are vented in the inside you need to put them on a specific way.
"The more you know."
Happy birthday Josh 👌
On the z33, the extra material on the rear hub is for your e brake cable. Might be the same on the z32 🤷♂️.
Do a paint correction on it. That paint will shine with a nice buff.
That little dimple in the end of the spindle where the nut goes it's for an air hammer to push it out
HBD JOSH glad after 10 years your car is almost done🤘🏼🤘🏼
The brake setup is mint🤘🏼
Obviously US didn't get alot of them but was easy to spot a factory na S or R chassis as all non turbo model were 4 stud hubs turbo 5. N bigger brake setups. Not sure this applies to s15 and 34 skylines but did for models before them
Check Canadian, Australian and European forums all the info you need is there for compatibility questions
Damn B, get some drops my guy.
I just did some wheel bearings on a Tacoma and made a jig to get that race off if you need a pic for future problems let me know 🤙🏼
Those brakes look sweet the wheels not so, Congratulations Josh and Happy Birthday
justin is such a machine, dude can handle anything
Jimmy o with the r chassis finally
RJ: "You have a fake GTS-T and a fake M3. Such a poser"
The disrespek is massive 😂😂😂
Ima big fan of those wheels on the r33
Love the videos with all the boys
Justin always kills it
Yesssss yess R33 content! 🥰🥰🥰
jimmy: engine swapping and putting new hubs and brakes on his car
me: only being able to afford stickers
Start driving trucks
You can replace those bearing races if need be, no other then motorcycle headstock bearings really. cut a slot as close to the stem as possible, give it a big whack with a hammer an chisel and it'll break making it fall right off.
the gold center with polished lip bbs’s would look sweet on the r33
Jimmy's Lift:
Am I a joke to you?
THE E BAY BLACK SLOTTED GUNK GROOVES IN THE PADS . TAKE PADS OFF AFTER FIRST FEW RUNS AN CLEAN THE PAINT OUT !!! TRUST ME
I love those wheels on that car
1:22 ayyy jimmy knows what’s up with the moistboys
Think it looks sick. Go with it man. Shits tight !
Jimmaaayyyy here from Puerto Rico!
Pressing in and out bearings is pretty much an adult jigsaw puzzle.
Not even mad those wheels look dope on the r33