I have these in black and red Make sure to go through and lock tight everything One issue I had with mine some of the screws were too long Rub down my axle shaft and cause it to snap in half How I addressed my problem I and shaped just enough off The screws In the front and rear axle
Definitely buddy I have been running the same axles still haven’t had any problems with them just a awesome set a must if you want portals and aluminum there is a link in the description for a set like what I have just a little different not by much thanks buddy much appreciated
Did you lose shock travel in the front due to the large pumpkin? The axles are different design between scx10 and scx10ii, if I'm not mistaken. I tried this and lost all travel in the front... On scx10, the pumpkin is large. Sxc10ii, they are small. Frame components moved out of the way on the scx10 to allow for axle mounted servo
No problem buddy I would not get the injorna set I have found that they have a lot of play in them they have stopped making the set in the color I have here but here’s a link for a set just like the ones I have amzn.to/3R6yLm8
Highly considered grabbing a set of these but ended up just staying straight axle on my scx10.2. I did snag some treal housings and knuckles. Kinda regret it after watching this lol
They have been some good axles for the money I am now running a 2500kv 10p revolver motor with them now and no problem with them just the drive shaft time to upgrade those
@@rc.terminator Good to know! May have to grab a set and start another build for that price! And I've been using the what I believe are Hot Racing drive shafts on my 7+lbs scx10.2 for 6 months with zero issues. There is still absolutely no slop in them after a ton of wheel hopping, and sudden stops.
They have made some changes to these that I got but these are the same ones that I have RZXYL Aluminum Front / Rear Portal Axles Set for 1/10 Axial SCX10 II 90046 90047 RC Crawler Car (Silver)
Here’s a video I did about it my friend I hope this helps you How to fix a axle from going in reverse in three steps ua-cam.com/video/Kvr_RxXU8bQ/v-deo.html
Hey bud great video and I also bought those same axles too and have the same issue on the front axle so did you make a video on the front axle tear down and rebuild.
Definitely buddy there is a lot of running with this truck I just love the way the truck just works now here’s a link for you Holmes Hobbies Revolver 2500kv 10p ua-cam.com/video/6cRrgpdSgJo/v-deo.html
one sweet chevy RC truck good job sir , really sweet crawler
Thanks buddy much appreciated for that definitely was a nice build
I have these in black and red Make sure to go through and lock tight everything One issue I had with mine some of the screws were too long Rub down my axle shaft and cause it to snap in half How I addressed my problem I and shaped just enough off The screws In the front and rear axle
Thanks my friend much appreciated they have been some good axles so far but yes so true about lock tight most definitely
I did this too ): ended up totally stripping out the threads in the axle tube when it loosened up. Got some helicoils otw though
Thanks for the info i check the screws before I go out for a rip been thinking about using red lock tight next
will these fit vatera ascender? i’m finding it really hard to find parts now that they are discontinued
They just may as long as the drive shafts line up they are set up to be a 3link front or a 4link
Wow, that is sooo frickin' Kool !
Definitely buddy I have been running the same axles still haven’t had any problems with them just a awesome set a must if you want portals and aluminum there is a link in the description for a set like what I have just a little different not by much thanks buddy much appreciated
Did you lose shock travel in the front due to the large pumpkin? The axles are different design between scx10 and scx10ii, if I'm not mistaken.
I tried this and lost all travel in the front...
On scx10, the pumpkin is large.
Sxc10ii, they are small. Frame components moved out of the way on the scx10 to allow for axle mounted servo
I keep it as a 3 link front with a chassis servo and now it does seem to have a lot of flex that way I do get full shock compression on the front
Great video I really enjoy it thanks
Thanks buddy much appreciated I’m still running those axles today
The new axles look pretty sweet
Thanks brother much appreciated they do look nice I hope they work good
I'm jealous ! Nice upgrade 👍🏻
I’m sorry buddy much appreciated I hope they work as well as they look
did I miss WHAT kind of axels did you get? what company? I'm looking at the Injora portals-
No problem buddy I would not get the injorna set I have found that they have a lot of play in them they have stopped making the set in the color I have here but here’s a link for a set just like the ones I have
amzn.to/3R6yLm8
@@rc.terminator Thanks I'll check them out
No problem buddy glad to help
Highly considered grabbing a set of these but ended up just staying straight axle on my scx10.2. I did snag some treal housings and knuckles. Kinda regret it after watching this lol
They have been some good axles for the money I am now running a 2500kv 10p revolver motor with them now and no problem with them just the drive shaft time to upgrade those
@@rc.terminator Good to know! May have to grab a set and start another build for that price! And I've been using the what I believe are Hot Racing drive shafts on my 7+lbs scx10.2 for 6 months with zero issues. There is still absolutely no slop in them after a ton of wheel hopping, and sudden stops.
Thanks for that I will check them out again much appreciated
How are the axles after a long term usage?
So far so good I am running a revolver motor now with them and still no problem’s
@@rc.terminator ok thanks I’m gonna get mine some
Awesome buddy just remember to blue lock tight all the screws on them
super solid axles!
Thanks brother much appreciated they are heavy for aluminum
@@rc.terminator That would helps the balance and no falling.
Yes sir that’s one reason why I wanted to go with them but show everyone that you don’t have to spend a lot of money for something nice
Do you have a link to these?
There are so many different axles on Amazon
They have made some changes to these that I got but these are the same ones that I have
RZXYL Aluminum Front / Rear Portal Axles Set for 1/10 Axial SCX10 II 90046 90047 RC Crawler Car (Silver)
@@rc.terminator
How did you reverse your gearing?
Here’s a video I did about it my friend I hope this helps you
How to fix a axle from going in reverse in three steps
ua-cam.com/video/Kvr_RxXU8bQ/v-deo.html
How are those axles holding up.?
They are still holding up just fine I haven’t changed anything yet my friend
@@rc.terminator cool good to know I just bought a set for my gs02 kamodo hopefully they work lol
@GorillaFPV4life awesome just don’t forget to lock tight everything my friend
Hey bud great video and I also bought those same axles too and have the same issue on the front axle so did you make a video on the front axle tear down and rebuild.
Yes sir buddy I did I went and showed how to fix them from going in reverse
@@rc.terminator yea I found the video for it and did exactly what you said and did and it's perfect now damn good video and keep up the good work 😊👍
Thanks buddy much appreciated glad to hear that and glad it helped you out
Cant wait to see the run. Maybe more 'scale' CG.
Definitely buddy there is a lot of running with this truck I just love the way the truck just works now here’s a link for you
Holmes Hobbies Revolver 2500kv 10p
ua-cam.com/video/6cRrgpdSgJo/v-deo.html
Nice addition to the axial
Thanks brother much appreciated I hope they work as well as they look
I might buy one soon
I do like them a lot just make sure you blue lock tight all the bolts they will come loose
I’ll buy the stock axels from you
I would sell them but working on a special build for the channel I will only have a rear axle left my friend
@@rc.terminator cool no worries, nice vid. How are they holding up so far? Your new axels?
So far I have no complaints with them and they are smooth as butter
Nice Axles budd I would like to see a video on how you fix that front axle if possible lol
Thanks buddy much appreciated I was going to do that so everyone can see what they need to do to fix it lol
@@rc.terminator cool deal
Nice axles and video
Thanks brother much appreciated
Awesome video man. It's been awhile how have you been man.
Thanks buddy much appreciated been doing good so far definitely worth the money
Nice 👍
Thanks brother much appreciated
Nice footage bro ! 👍 -⭐-
Thanks brother much appreciated
Nice👍👍👍👍👍👍🇲🇾🇲🇾🇲🇾 10:00
Thanks buddy much appreciated
for $120 I better not have to take it apart and repair it...
I agree with you on that I did send them back for a replacement and the new ones did the same but I did do the gear flip and they been very good axles