Son, you had better cherish the time with that old fellow there..! Listen to what he has to say, and learn what he happens to teach.... a true craftsman and Artist... your work is awesome.
Dude, spend as much time as possible with that man. Turning and blacksmithing, nice. I stayed by my grandpa's side growing up (diesel mechanic), rarely do I need to pay an auto shop bill.
That was awesome. I like the two-part design on the insert. I have made a few, but have been all one piece. your way looks much easier, and sounds great. Great video. Thank you
Marv you are a treasure please keep making videos.......I am a call maker and collector and love the calls I have of yours........wish I could get a slingshot or a carved hammer though :) Joe Reinsch
Know this was a long time ago this video was made but I was wondering if there was anyway I could get you to make me one I'm wanting to get into duck hunting I'd like to go ahead and start to learn how to call and it be pretty cool to have one of your calls
Tried to make a duck call one time with my Pa in his shop (he's got everything you have in you shop) we were just going to make the barrel of the call and put an echo insert into it. Cracked in half. I'd like to try it again sometime!
Another jolly good show! You seem to have 2 profiles going... one for each video. I subscribed to both so I don't miss anything. What's the old lathe? I have a Jet 1236, your's looks a lot more heavy duty.
Looks like youve done this a time or two. You blew throw that. Id still be truing up the barrel. You have everything in order, everything at arms reach. I hope someday ill be this good. You have this down pat. Great job.
hey stephen what did u use for a read cus me where i live i cant order some reads cus shipping is like 50$ and my cart is 5$ lol so did u use a real read or did u use somthing else!
6CoMaNdEr6 good luck with your new lathe...remember you will need a bench grinder sharpen your lathe tools... a $29.00 menards grinder will do just fine
Tell your Grandpa he is very kewl for doing this video. Do you think you could ask him to publish some dimensions to go along with this. I wasn't able to get a good feel on the drill dimensions or the sounding board. How wide was each piece? Regards, BAG2
Instead of "How to make a duck call" the title should be "Watch me make a duck call". Not trying to offend or anything its just that I cant really see what you were doing whenever your facing the camera and holding it close to your chest and doing idk too it. Because its smaller than your hand so all I can see is the back of your hands and all I can tell is that your fidgeting with something. I guess as far as taking a piece of lumber and making it into the shape of a duck call then you definitely did display that. Btw nice shop, I miss my man cave workshop. My parents moved and asked to use it as temporary storage, and that was a few years ago and I have absolutely nowhere else I could put it. One day ill get it back, soon I hope lol.
Damn if that was my grand pops I would perfect that craft he is giving out ask him if I could start making call with his equipment and put duck dynasty out of business go to the local stores in my County and ask if I could sale my Calls in there store at a my operational Break even point jus to see will they sell without taking a loss if they do good than start changing the store at a wholesale price if the sales are high jus to get my name out there then I’ll move to the County over repeat the same process until I have the state 🗣
Marv Meyer I meant no disrespect my friend I find that quite lovely in the fact that he was there for you and by the way Beautiful work and a steady hand I’m still waiting for my grandchildren that’s if I get some I’m 64 years old fingers crossed thank you for over the pond 🇬🇧🤝🇺🇸👍❤️
![How To Make A Duck Call [step by step] Cocobolo Hunting Call](http://i.ytimg.com/vi/3thiQyIPrl8/mqdefault.jpg)
Son, you had better cherish the time with that old fellow there..! Listen to what he has to say, and learn what he happens to teach.... a true craftsman and Artist... your work is awesome.
thats cool... thanks
A true craftsman works with speed and precision, he has both
AWESOME !!!! YOU KNOW HES A PRO BY HOW SMOOTH HE WORKS, WONDERFUL TO WATCH AN ARTIS OF HIS CRAFT WORK !!!!!
That was amazing....Now can you do one that explains everything. Drill bit sizes. Length of wooden pieces. where you get the reed...etc.?
Dude, spend as much time as possible with that man. Turning and blacksmithing, nice. I stayed by my grandpa's side growing up (diesel mechanic), rarely do I need to pay an auto shop bill.
That's a cool replay...Thanks
You can tell he knows what he's doing. Nice work!!
Just class from start to finish! Practice really does make perfect! Very impressive!
Большое спасибо за это видео! Браво мастер! Приятно смотреть на работу профессионала!
Organized through disorganization, love it!! Lol
The way this guy treats his tools and equipment is something else. Hard to believe he's still got all his digits.
And I still have all my fingers!
Wow this guy is awesome, Cherish every minute with this man.
cool comment.... Thanks
Thanks Kurtis!
Now that was cool!
That was awesome. I like the two-part design on the insert. I have made a few, but have been all one piece. your way looks much easier, and sounds great. Great video. Thank you
my son and I watched..we both agree that you're awesome! love the video!
+Chris Bayless That's good to here. Marv
That was amazing. I don't know much about wood working but I'm a waterfowl hunter and I want to start turning out my own calls
very nice work master👍👍👍
Dying art. Thanks for shearing.
That was great pretty fast don't know if I caught it all but a very good demo loved it
Marv you are a treasure please keep making videos.......I am a call maker and collector and love the calls I have of yours........wish I could get a slingshot or a carved hammer though :)
Joe Reinsch
Wow! Great video Marv!
Thanks
Know this was a long time ago this video was made but I was wondering if there was anyway I could get you to make me one I'm wanting to get into duck hunting I'd like to go ahead and start to learn how to call and it be pretty cool to have one of your calls
Have some on ebay...I tough the highschools how to make duckcalls in woodshop class.
what machine did you use to make the sound board and where did you get the piece of reed
Hi Marv have you got drawing or instruction for this please it's brilliant. Thanks Norman
Tried to make a duck call one time with my Pa in his shop (he's got everything you have in you shop) we were just going to make the barrel of the call and put an echo insert into it. Cracked in half. I'd like to try it again sometime!
dodnt give up.... practice.. practice ...,.practice.
Impressive! Thanks Marv. I’m inspired and intimidated at the same time!
great job oldtimer! simple and ez great work!
Thanks young man
That was awesome, and I bet it smells amazing. Fresh cut wood is like heaven to my nose!
Thanks, Jacob
Great work! You know your skill well.
Very Educational. Thank You.
Another jolly good show! You seem to have 2 profiles going... one for each video. I subscribed to both so I don't miss anything. What's the old lathe? I have a Jet 1236, your's looks a lot more heavy duty.
for some reason I count get them on the same subscription...its a 32 year old general lathe
Looks like youve done this a time or two. You blew throw that. Id still be truing up the barrel. You have everything in order, everything at arms reach. I hope someday ill be this good. You have this down pat. Great job.
I like your duck call. What was the tool you put in the chuck to hold your base? Also what bit did you have in the routor?
+Dale T Prescott.... that was a tool I made on the woodlathe . you could make one out of hardwood that would work just as good.... round bottom bit
That was really cool. Thank you 😊
THANKS Hilary
What wood Lathe do you use
Its on old General lathe.The speed control broke years ago and I have only one speed...About 1300 rpm
What kind of rammer Is that and for the insert Piece Does One and have to be quarter inch and the other and 584 the other piece to slide into to glue
Tapered reamer
can you double reed that? Or just a single? New to duck hunting.
+COpe CApitians try it
+COpe CApitians I think I'll try it
thank you
What size whole for barrel and plug?
Big Hoss normally people use 5/8 inch
I just made my first one today and it took me half the day...you did it in 15 minutes lol Plus yours sounds alot better!
+Stephen Rydzanich keep practicing. Marv
Stephen Rydzanich hsighxhhfjuuvhcjjvjjxhh
hey stephen what did u use for a read cus me where i live i cant order some reads cus shipping is like 50$ and my cart is 5$ lol so did u use a real read or did u use somthing else!
Really neat. Looks like you have a lot ... Are you trying to get rid of one or two 😀😀
+Brad Hart ... on ebay
Very enjoyable to watch
Thanks
I think you should make another video about making a duck decoy
Good idea. I think I will do that. I have been carving decoys for 40 years.
This makes me miss my lathe.
my wife loves the Vikings.
Awesome job.
Thanks
Very cool.
Is the read a special material or just plastic
Mylar reed
The king!
Cool... Thanks
Hi Marv, love your comment, 10 minutes of work and fifty years of experience. Art Beauchamp Game Calls.👍
thanks Art.
why you dont send more videos?
Ensina fazer o Javelina call
wish you could teach me all that.and wish you could make one for me with your signature ☺.you are awesome god bless you☺
Start with what you have and move on forward
marv meyer I don't know how to make one.
thats why I asked you sir to make me one with your signature.
Do u supply ?
Sometimes
@@marvmeyer9179 how much do u charge for it ?
Can I have ur number ?
Amazing just wow you just made a homemade duck call that i would pay 100 dollars for in 10 mins i would pay just to learn how just wow
Thanks. 10 minutes of work and 50 years of experience.
marv meyer im 15 gonna buy a lathe soon or maybe a Christmas gift since i cant be out shooting ducks might as well make calls hahaha
6CoMaNdEr6 good luck with your new lathe...remember you will need a bench grinder sharpen your lathe tools... a $29.00 menards grinder will do just fine
marv meyer will do thanks for the advice will get back to you after i make my first call
I just want to know how he touched those drill bits directly after using them... I know that was hot
asbestos hands probably
Keep them sharp and they wont get so hot
do you sell duck calls as well sir?
Does he sell duck calls?? Some of the finest artwork in the call business!! Google his calls, look on eBay, proud to own several!!
+esbirddog cool thanks!!!
marv you're cool
Tell your Grandpa he is very kewl for doing this video. Do you think you could ask him to publish some dimensions to go along with this. I wasn't able to get a good feel on the drill dimensions or the sounding board. How wide was each piece? Regards, BAG2
awesome
Good stuff
Thanks
Make more videos. PLEASE!!!!!!!!!!
I'm working on it with my grandsons...Thanks for your interest!
Instead of "How to make a duck call" the title should be "Watch me make a duck call".
Not trying to offend or anything its just that I cant really see what you were doing whenever your facing the camera and holding it close to your chest and doing idk too it. Because its smaller than your hand so all I can see is the back of your hands and all I can tell is that your fidgeting with something.
I guess as far as taking a piece of lumber and making it into the shape of a duck call then you definitely did display that.
Btw nice shop, I miss my man cave workshop. My parents moved and asked to use it as temporary storage, and that was a few years ago and I have absolutely nowhere else I could put it. One day ill get it back, soon I hope lol.
that's MY 14 YEAR OLD GRANDSON
Damn if that was my grand pops I would perfect that craft he is giving out ask him if I could start making call with his equipment and put duck dynasty out of business go to the local stores in my County and ask if I could sale my Calls in there store at a my operational Break even point jus to see will they sell without taking a loss if they do good than start changing the store at a wholesale price if the sales are high jus to get my name out there then I’ll move to the County over repeat the same process until I have the state 🗣
My grand sons have made a few calls.They are more into sports then hunting.
The woodturning was okay, you couldn't see what he was doing as far as the reed was concerned, not helpful if you have never seen a duck call.
sufta jisis gordonebis stoikebi
USE A TRIPOD!!!!!!!
Not all that good filming was bad didn’t show how to make one close up everything from a distance
My young grandson did the filming
Marv Meyer I meant no disrespect my friend I find that quite lovely in the fact that he was there for you and by the way Beautiful work and a steady hand I’m still waiting for my grandchildren that’s if I get some I’m 64 years old fingers crossed thank you for over the pond 🇬🇧🤝🇺🇸👍❤️
what machine did you use to make the sound board and where did you get the piece of reed
+Isaac Flood ...router.... I have seen duck call reeds on ebay
Okay. Thank you sir.
What size hole for barrel and plug?
1/16 under 3/4