So happy that Randy shows up more and more. You should really consider a video where Merlin, Randy and Dougo tell us all about the history of the farm! I'd love that!
I am just keeping Nicole in my prayers day and night. The videos have been great during Nicole's ordeal. I wish I could put more than one like on each of these videos.
Well done on the editing, Nicole. I have been watching every video since last September, and it has been fun to watch the attention to detail and creativity increase over time. The welding segment was very nice. Keep up the good work. Also, keep up the good work to Chet, Doug-o, and The Big Swede
We still need rain and lots of it .up here in north central north Dakota chet. Been planting in dust. North west of bottineau nd. Praying for all of you 🙏
Hey Chet,dougo. If you put your foot under one side of that tire and good pry bar under the other side you can lift it and roll it on like butter. I'd hate too see that Jack go too far and that tire kick out ..trust me when I say it makes you very very angry.....the big swede does a very thorough job at everything he does eh! Love the videos and as always I'll say a prayer for Nikki and Chet
I didn't know where to post my condolence's so I'm doing here. So so sorry to hear about Nicole Chet!!!!!!! You and the family are in my prayers!!!! Hang in there and try to be strong!!!!! You have so many people who admire what you do!!!!!
Rise/Run determines proper slope to prevent high centering. Consider installing C concrete channel drainage system at transition from dirt to concrete to avoid lake washout mess.
Hello Nicole and Chet, Chet I think you should get a rebuilt engine for Blacky, dosen't hurt too have a back up vehicle. About the sprayer, I would give it a good washing and drying then spray the booms with Flex Seal Spray. I would get a small piece of bare metal, spray half with the Flex Spray and then expose it to the fertilizer to see how it works. Prayer's for you and your family. Love the video's keep up the good work and god bless and stay safe.
Hey I hope your wife is doing well I am praying for you and your family I just lost my wife to her battle with kidney failure your videos always make me smile
Thanks for another great video. Appreciate your time to do the video so we can follow along. Lots of odds and ends to do after planting. Your garage entrance will be nice with the extra ramp of concrete outside toward the door. Great idea. I sincerely appreciate the way all of you take care of your equipment. My family was not way also. Keep them clean and looking nice. All of you are great of equipment maintenance and clean care. Your equipment looks nice. The rock box you put on is fairly good sized. Nice the bottom drops out to get rid of rocks. Neat. All of you are keeping busy with catch up items. Thanks for including us. Thanks to Nicole for editing. Thinking of you Nicole. Trust your new meds are helping and you are doing ok. Take care of yourself. You all take care and be safe. Thanks Chet for filming. Iowa farm boy from years ago.
Just a suggestion, you may want the head of the bolts holding the rock box on, on the inside of the box. Having the head on the outside, you may ruin the threads from rocks hitting the nut side and could make adjusting height a pain later.
I started on the Millennial full time, now Larson is full time and Millennial part time, Keep up the good work and hope Nicky’s doing good from up here in Alberta Canada Eh! Double Double up and Senderrrr!!!
Still Believing Nicole is going to beat this as I'm praying for you Nicole night and day. Nicole one thing you should think about is stay away from sugar and exercise alot. I love your videos Larson farms, can't wait for the next one.
We have been spraying our booms down with diesel fuel and new oil after we are done with them for the season (wash first). Booms still look new. We have also sprayed them with diesel fuel and oil after side dressing with the sprayer. We think the oil residue also helps make the chemical residue come off easier when you power wash it.
On our 1770 we put a flex in it and split the planter into quarters and so when we go right on top of a terrace and i know you guys dont do terraces but it helped the ride a lot even with and 8335rt tractor
Hi you all in Larson farms and congratulations of finishing planting. Chet i saw your last video and i wanted to try recommend maybe instead of changing the weight distribution of the planter maybe try to split between the middle part power of the rawcleaner and the sides so you can control it different between the middle and the sides. Any ways it is realy pleasure to watch yours videos only good to every one in Laraon farm 🚜🤙🚜
We spray a think coat of light oil in our fertilizer hoppers and let it drip down into the auger and then run the auger a bit to get it coated a little. It seems to help. We usually don't have any issues later. The oil seems to dissipate.
Today I just happened to watch the video of Dougo ripping the steering column off of the combine last year. I'm still laughing.....but I learned something. Don't mess with Dougo !!
Chet, i dont know if you will be seeing this,but instead of the weight distribution kit, if you added 2 more CCS tanks, one on each wing, you would have way more bean capacity, and more weight on your wings. If you put saddle tanks on that new 8RT, you could potentially go for up to 200 acres between fills, if my math is right.
I started on the Millennial full time, now Larson is full time and Millennial part time, Keep up the good work and hope Nicky’s doing good from up here in Alberta Canada Eh! Double Double up and Senderrrr!!!
You two are making my old carpenter heart go pitty pat. They can drag back the existing gravel and use it for fill if needed. Scratch a little footing at the leading edge too.
I remember an episode that the low deck trailer used for the excavator was rubbing against the concrete floor, I'd check with this one too to figure out the pitch of the new concrete slab
You guys should create a frame that can be mounted on the bobcat that sprays water 8 different directions towards the center of the frame, think rectangle, to do that washing of the boom. that way, just drive the bobcat along the boom with the wash frame hanging off the side surrounding the boom and the only manual place would be at the back of the sprayer.
We run cat mt865s in the pacific nw we have lots of draws and hills. I cannot count how many times I’ve seen the weights plow into the ground. One of them is in my profile picture.
They make pressure washer wands with flexible ends we have one it’s the best for washing in tight areas should try get one might be really good for those booms
the transit is nice. I was imagining a mason's line, a level, a ruler and a rebar stake. what would life be like if we gave away all our blocks of wood? I'm scared to try :) Thanks for another great video!
Don’t use a straight slope. Use a vertical curve and you can have truck access and keep the slab on the ground without the fill you mentioned.The problem with most concrete crews they think limited to straight planes and level.
On twin wheeled hubs you want to put the new tire on the outside and not the inside as it will wear prematurely as it likely to be taller than the inside one.
So happy that Randy shows up more and more. You should really consider a video where Merlin, Randy and Dougo tell us all about the history of the farm! I'd love that!
I am just keeping Nicole in my prayers day and night.
The videos have been great during Nicole's ordeal. I wish I could put more than one like on each of these videos.
Agreed on all counts
Well done on the editing, Nicole. I have been watching every video since last September, and it has been fun to watch the attention to detail and creativity increase over time. The welding segment was very nice. Keep up the good work. Also, keep up the good work to Chet, Doug-o, and The Big Swede
I love how the videos have been edited lately. The fade in and out of music before time-lapses are really well made. Well done team!!!
We still need rain and lots of it .up here in north central north Dakota chet. Been planting in dust. North west of bottineau nd. Praying for all of you 🙏
Yeah take some of ours. Midwest
We would be glad to. So dry up here. When the frogs croke it creates a dust storm.
You guys are the most entertaining AG channel on UA-cam. 👍. Keep them coming.
♥️ Chet and Nicole are in my thoughts ♥️
Thanks,your in my thoughts too
I agree also , 🙏 ......
Great video , I enjoyed it ...... 👍👍👍
RIP
Oh, I wanted to see the Big Swede’s face! Great video! Thanks 🙏
Thank you for not swearing or having a potty mouth. It is much appreciated.
Hey Chet,dougo. If you put your foot under one side of that tire and good pry bar under the other side you can lift it and roll it on like butter. I'd hate too see that Jack go too far and that tire kick out ..trust me when I say it makes you very very angry.....the big swede does a very thorough job at everything he does eh! Love the videos and as always I'll say a prayer for Nikki and Chet
Good morning and a massive G'day from Australia. It's Tuesday here
Always a good feeling to know tomorrow is still coming!
Thanks for sharing buddy glad you guys are pretty well done praying for you Nikki god bless
Great video, luv Dougo's humour. Big Swede sure has taken to the videos well. Thanks Nicole for the fine editing
I didn't know where to post my condolence's so I'm doing here. So so sorry to hear about Nicole Chet!!!!!!! You and the family are in my prayers!!!! Hang in there and try to be strong!!!!! You have so many people who admire what you do!!!!!
Rise/Run determines proper slope to prevent high centering.
Consider installing C concrete channel drainage system at transition from dirt to concrete to avoid lake washout mess.
I wish I could have as much fun at work as you guys!
Hello Nicole and Chet,
Chet I think you should get a rebuilt engine for Blacky, dosen't hurt too have a back up vehicle.
About the sprayer, I would give it a good washing and drying then spray the booms with Flex Seal Spray. I would get a small piece of bare metal, spray half with the Flex Spray and then expose it to the fertilizer to see how it works.
Prayer's for you and your family. Love the video's keep up the good work and god bless and stay safe.
I got a chuckle imagining the surveying episode... And here I thought my dad, brother, and I were the only ones that had days like that.
The slight smirk on Chet’s face said everything when Dougo asked what the word was.
The planting videos have been great!!🚜👍👍
Hi chet how are you doing so glad everything went well god bless Nikki god bless all of you
Hey I hope your wife is doing well I am praying for you and your family I just lost my wife to her battle with kidney failure your videos always make me smile
My sympathies extend to you. Loss becomes grief in turn is a journey telling a new story
Hope your doing great nichole! In God there is strength! Congrats gentlemen on the successful planting season
Praying constantly for Nicole and Chet!
someone taught you well my man good stuff god bless
Planting is over and work starts over. Thanks for sharing.
Thanks for the great videos , thinking of you guys ,stay safe
Prayers for Nicole, Chet & family. The big Sweed deserves a raise!
Thanks for another great video. Appreciate your time to do the video so we can follow along. Lots of odds and ends to do after planting. Your garage entrance will be nice with the extra ramp of concrete outside toward the door. Great idea. I sincerely appreciate the way all of you take care of your equipment. My family was not way also. Keep them clean and looking nice. All of you are great of equipment maintenance and clean care. Your equipment looks nice. The rock box you put on is fairly good sized. Nice the bottom drops out to get rid of rocks. Neat. All of you are keeping busy with catch up items. Thanks for including us. Thanks to Nicole for editing. Thinking of you Nicole. Trust your new meds are helping and you are doing ok. Take care of yourself. You all take care and be safe. Thanks Chet for filming. Iowa farm boy from years ago.
Awesome Video as Always, God Bless you and your wife!!!!
I love you all Chet you are in my thoughts love you man
Loved the editing of Eric doing the Powerwash Dance! 🕺
The videos are great. The comoradie between you four men is awesome..
Praying for you guys. Love this channel, it’s quite entertaining. 👍👍👍❤️
Love to Amy and Nikki!
Just a suggestion, you may want the head of the bolts holding the rock box on, on the inside of the box. Having the head on the outside, you may ruin the threads from rocks hitting the nut side and could make adjusting height a pain later.
I started on the Millennial full time, now Larson is full time and Millennial part time, Keep up the good work and hope Nicky’s doing good from up here in Alberta Canada Eh! Double Double up and Senderrrr!!!
I am really glad to hear that your wife is doing good thank god for that been praying for her, you and your whole family....love the vids
Hey Chet, my thoughts are with you. Losing your loved one so young has to be really tough. Hang in there young man!
You guys are the ones that got me into Mello Yello and hope the wife is doing good
They've stopped drinking it because of Coke's actions in Ga. Dougo said this a few episodes back.
Oh I didn't see that
👍 From Cadillac Michigan prayers for Nicole 🙏
Great video and Loved the tunes Nikki !
Still Believing Nicole is going to beat this as I'm praying for you Nicole night and day. Nicole one thing you should think about is stay away from sugar and exercise alot. I love your videos Larson farms, can't wait for the next one.
Keep your spirits up Nicole I know editing these videos definitely help
We have been spraying our booms down with diesel fuel and new oil after we are done with them for the season (wash first). Booms still look new. We have also sprayed them with diesel fuel and oil after side dressing with the sprayer. We think the oil residue also helps make the chemical residue come off easier when you power wash it.
Damm Chet your dad seems like a nice guy, so understated funny love it..
Great job on keeping equipment clean.
On our 1770 we put a flex in it and split the planter into quarters and so when we go right on top of a terrace and i know you guys dont do terraces but it helped the ride a lot even with and 8335rt tractor
Hi you all in Larson farms and congratulations of finishing planting. Chet i saw your last video and i wanted to try recommend maybe instead of changing the weight distribution of the planter maybe try to split between the middle part power of the rawcleaner and the sides so you can control it different between the middle and the sides.
Any ways it is realy pleasure to watch yours videos only good to every one in Laraon farm 🚜🤙🚜
We spray a think coat of light oil in our fertilizer hoppers and let it drip down into the auger and then run the auger a bit to get it coated a little. It seems to help. We usually don't have any issues later. The oil seems to dissipate.
have fun Chet😀😂😎👍🏻
Dougo is the only farmer I ever heard of with an aversion to dirt!
Today I just happened to watch the video of Dougo ripping the steering column off of the combine last year. I'm still laughing.....but I learned something. Don't mess with Dougo !!
Love valve stems when they line up
Just love dugo and the pig story thanks for sharing always good content I am a dugo fan.
Chet, i dont know if you will be seeing this,but instead of the weight distribution kit, if you added 2 more CCS tanks, one on each wing, you would have way more bean capacity, and more weight on your wings.
If you put saddle tanks on that new 8RT, you could potentially go for up to 200 acres between fills, if my math is right.
The tire changing portion looked like fun! 😊
Not really. But y’all did a good job! 👍🏻
Love the big shop
cheers guts,kove your shows,gnz
-- nice ride along
Nice weld Chet and dougo just needed a little help he bout just threw that outside dual on there with your help keep up the great work Chet.
These videos always cheer up my day thanks Chet keep up the good work
Excellent video edits. This channel (and Welkers) should have more subs that all the other farmtubers!
Cant leave out the millennial farmer
@@leviwulff Eeeahh.. good content but not the same edits. ;). Ivers does pretty good too.
I started on the Millennial full time, now Larson is full time and Millennial part time, Keep up the good work and hope Nicky’s doing good from up here in Alberta Canada Eh! Double Double up and Senderrrr!!!
It was a good video and a good laugh
Check your tire pressure more often! The biggest reason for a sidewall blow out is low pressure!
The rock box looks nice
Hey Chet, if you're worried about rust then give it a light spray with waste oil.
Rise Over Run. Check your wheelbase and clearances. Know your break over angles
So close to 250k subs!! Great stuff!!
Thanks for the videos 📹. Keep sending them. I remember when we had hogs. Sooooie!!!
Put a hydro fifth wheel on the you pull the trailer with. When you go to pull in your shop you can raise the fifth wheel to give u more clearance
great video guys. Thank you
Dougo the word is brotherly love me my brother couldn't see eye to eye when it came to the farm lol
Hi we are done planting to
I really need to see the video from Iowa that thing is a beauty
Agreed
6" thick concrete 3,000 psi w/ #4 rebar at 24" oc each way slope away from door at 1/8" per ft. about 5" drop over 40 ft.
Or maybe but more rebar in there to help make it last longer. Like go to 18” OC and 12” around edges
You two are making my old carpenter heart go pitty pat. They can drag back the existing gravel and use it for fill if needed. Scratch a little footing at the leading edge too.
If they are going to spend the money I would not go anything less that 4000, I would lean more towards c4. Just my opinion.
@@nickfuller4825 I'm hoping that's not the same C4 that I'm thinking of. Although, once you filled in the hole, it would be level.
Good video Nikki !
Fantastic video!
I remember an episode that the low deck trailer used for the excavator was rubbing against the concrete floor, I'd check with this one too to figure out the pitch of the new concrete slab
Enjoyed the show
Alright You have convinced me to by your merchandise
Love your videos
You guys should create a frame that can be mounted on the bobcat that sprays water 8 different directions towards the center of the frame, think rectangle, to do that washing of the boom. that way, just drive the bobcat along the boom with the wash frame hanging off the side surrounding the boom and the only manual place would be at the back of the sprayer.
PRAYER'S Chet and Nicole🙏🏻❤️👼🏻👸🏻😎👍🏻
Great video thanks again
We run cat mt865s in the pacific nw we have lots of draws and hills. I cannot count how many times I’ve seen the weights plow into the ground. One of them is in my profile picture.
They make pressure washer wands with flexible ends we have one it’s the best for washing in tight areas should try get one might be really good for those booms
When you said big stone county I remember about 7 or 8 years ago being at the fairgrounds there for a kids rodeo that my 3 kids rode in.
A pallet jack works awesome for changing tires
Eric got the forearm workout in with the power washer.
the transit is nice. I was imagining a mason's line, a level, a ruler and a rebar stake. what would life be like if we gave away all our blocks of wood? I'm scared to try :) Thanks for another great video!
Don’t use a straight slope. Use a vertical curve and you can have truck access and keep the slab on the ground without the fill you mentioned.The problem with most concrete crews they think limited to straight planes and level.
Great videos keep it up 👍
At first his voice drove me nuts but I got use to it now.well it still drives me crazy but they are my favorite show these days
Loved the video, thanks! :)
On twin wheeled hubs you want to put the new tire on the outside and not the inside as it will wear prematurely as it likely to be taller than the inside one.
It looks like a laugh a minute. You guys have fun even power washing and changing tires.
10:27- 😂 lol!!! I don't think he would have called that a snail trail if he knew how people normally use the term!? Lol
Look good guys your buddy form NE ,,
Awesome video. Glad you are finished planting. Now, do you start spraying beans?
Surely you would HEAR a TYRE blow like that.!!.
???🤔NO🤔???
LOVE THE VIDS
KEEP'EM COMING
RICH(UK) 🥰🥰🥰.
Drove over the road for years you don’t always here a tire blow