I have a stock derbi senda 2021, when i realse the clutch while in 2nd or 3th gear nothing really happens, at most it just launches forward a bit. Do i need to rev it more or what?
Its the same thing for me, Rev the engine as much as you can and then do the mody motion that I showed in the video, do it in second gear and keep in mind that it is really hard but you can do it
i used to be able to wheelie whit 50cc airsal voca exhaust and 244mm pwk carb but then i got caught by the police and now i ride stock and i am trying to learn on my stock derbi senda
I have bsicly stcok yamaha Dt50 with all the restrictions taken out, stock carb stock exhaust and all of that and 13-57gearing but i still easily lift the front wheel at 6gear :D
Is it best if I start learning how to do a wheelie on my bicycle or should I just learn how to wheelie on my derbi senda.?? And I also have a LeoVince X-Fight exhaust and a LeoVince X-Fight black. And yes my derbi is stock. So it only have 3 gears.
on tuo itelläki oli sama verra tehoo vakiona. mut derbi on paljo tehokkaampi vakiona ku muut vaikka kulkiski vaa 45 esim vedin kaverin vakio dracin kans viivat vakio derbil ja jäi ku tikkupaskaan
You can get A different gearing on the bike then you don’t have to shift gears as much. But if you want To shift gears during the wheelie you want to be at balance point and then shift gears as fast as you can.
if your 2 stroke needs an oil and fuel mixture, its best to give it throttle sometimes as the fuel and oil gets shut off, while the piston keeps moving, so like i said, give it throttle sometimes when engine braking
Thanks for tutorial I'm now going straight to practice
Very nice, drop a comment if you have any more questions
@@IceMotoSweden kan jag fortfarande stegra om jag har drevning 11 framme och 65 bak? vad måste jag tänka på?
@@Neverguess22-13 Jå. 12, 13 eller en 14 i framme. Jag inte talar svensk så mycket, hoppas att du förstod :D Min Derbi har 13-65 och det är jette bra.
Swedish accent be like: *heavy*
Fattar inte hur alla 100k+ subs youtubers missar att få en att förstå, men ICEMOTO fixart galant.
Big ups
Everything is ok the tutorial is good it help me but you must to remember to keep the clutch when you dont rev it because you break the engine...
Tysm. Trying this on my derbi senda limited 2019. Hopefully not breaking any bones 😅
How'd it go
@@alphadurk9483 Yeah what he said i wanna know...
beery proffesinol!
lov it
Tip for the orange/black one: put WD40 in the ball bearings of the rear swing arm, so it doesnt squeak
I have a derbi from 2018 and the only way to get it up is in first gear, then shift to second. But never start the wheelie in second
If you do the body motion I showed in the video you can do it in second gear and Third and Maby forth
ois enox
@@raccuun6586 vulla schas
@@itzsentroxyt8307 speak english
ois enox
Good tip is also to keep your arms straight and not lean towards your bars
👍
nice!
Geil
do u dump the clutch when ur about to jump back or when u already are in the jumping motion?
Almost at the end of the jumping motion
helpful tutorial bro i will try after i fix my clutch
Glad it helped
I have a stock derbi senda 2021, when i realse the clutch while in 2nd or 3th gear nothing really happens, at most it just launches forward a bit. Do i need to rev it more or what?
Its the same thing for me, Rev the engine as much as you can and then do the mody motion that I showed in the video, do it in second gear and keep in mind that it is really hard but you can do it
@@IceMotoSweden Okay, thank you for the fast response!
@@north8229 no problem
i used to be able to wheelie whit 50cc airsal voca exhaust and 244mm pwk carb but then i got caught by the police and now i ride stock and i am trying to learn on my stock derbi senda
i got a cpi sm 50 too thanks for this vid :D
I have bsicly stcok yamaha Dt50 with all the restrictions taken out, stock carb stock exhaust and all of that and 13-57gearing but i still easily lift the front wheel at 6gear :D
(:
Is it best if I start learning how to do a wheelie on my bicycle or should I just learn how to wheelie on my derbi senda.??
And I also have a LeoVince X-Fight exhaust and a LeoVince X-Fight black. And yes my derbi is stock. So it only have 3 gears.
kommer testa detta när mitt nyckelben läkt
I have an 70Cc Derbi Senda from 2004 and if i change gears i just fall down it wont go up anymore and i can't keep it up in 1nd. Can i get tips please
ei vitussa oo vakio
on tuo itelläki oli sama verra tehoo vakiona. mut derbi on paljo tehokkaampi vakiona ku muut vaikka kulkiski vaa 45 esim vedin kaverin vakio dracin kans viivat vakio derbil ja jäi ku tikkupaskaan
Vart köpte du backspeglarna? Har samma moped som dej
100cc 2fast coming when? 😍
maby maby
@@IceMotoSweden 🤣
Nice video bro fattar
How much gas do you give? 1/4 1/2 3/4 full?
Is it possible with a restricted bike? Going to get mine soon and I cannot make it faster before reaching 1000km
Yes
i have a feeling that my bike has not enough power but maybe its that i need practice
bra video, galen engelska också 😘
😘
Nu längtar jag ännu mera för att få moppe kort!
Det är Nice👍
Hey I have 2019 senda and i press clutch give it rpm but it lifts just for half a second. Any tips. Btw nice vids man ;)
Yes, Its the same for my bike, if you do the body motion that I showed in the video you can get the front wheel up.
You just have to swing it really hard, it takes time to not be afraid to do it
Very much moottorijarrutus done in This video
Thx so mutch I gonna try this out
👍
very nice
On the video your friends bike sounds like shaking a tin can full of nuts and bolts
Vad har du för baklampa på derbin?
Har en 2017 också men har drevat 13 52 tror du forfarande det går att göra tror inte det eftersom den är drevad för toppfart
Om du inte har trimrör eller något sånt kan det blir svårt, men om du hade haft 14-65 går det. Men det kanske går med din drivning jag vet inte.
@@IceMotoSweden tack för svar kör med ostyrpt original rör och jag känner att det lättare att stegra med den original än med den nya drevningen
@@astonwallen722 ja, det är lättare att få upp den på bakhjulet med original men man behöver växla så tidigt.
@@IceMotoSweden okej tack för tipsen
Det går nog
were did u buy your raising block
Twostroke
there's a big difference between stock beta and stock derpi i cant get the wheel up on my beta even if i do anything
Maby, but I think you can do it with the right technique you can do it, I thought that it wasn’t possible in the beginning but it took a while.
Isn’t this bad for your clutch?
how do you keep the balance with a rotated handle for example? so you dont fall to the side ?
Nice tutorial, I have a completely stock rieju mrt from 2021 do you think it’s possible to do the same thing on it or is it just to slow and heavy?
It might be very hard, but I think it is possible
@@IceMotoSweden okay okay… so you’re saying it’s easier on a stock derbi senda? Why is that, is the senda lighter or more powerful or what?
@@Hajper_moto I don’t really know, but The stock Mrts that I have tried has been quite slow
@@IceMotoSweden okay well that sucks… thanks for the help anyway
@@Hajper_moto no mine couldnt't even do it with my stock exaughst full redistricted, i reccomend another exaughst
Can you do a scooter version of 50cc wheelie
I don’t have a scooter sorry
probably just move yourself forth and back to get the front up and throttle and brake to keep the balancepoint
but wont the bike stall if you do the first step?
Yes it might, you can pull in the clutch the same time as you press your brake
vad är det för backspeglar? väldigt nyfiken för kollar på några men jag verkar inte hitta några som jag gillar
Det var förra ägaren som köpte dom men jag tror att dom finns att köpa hos biltema
@@IceMotoSweden jaha jag var bara nyfiken
I have 2018 derbi drd and it has torque in only high rpm. How should I do wheelie?
As i showed in the video, but you want to Ride at the beginning of the high rpm and then you do the body motion
@@IceMotoSweden and what if my gear ends too soon? How do I change gear mid wheelie
You can get A different gearing on the bike then you don’t have to shift gears as much. But if you want To shift gears during the wheelie you want to be at balance point and then shift gears as fast as you can.
Which Camera do you use ?
is it short transmission as mine for eg.: 1st gear 12 kmh and 2nd max like 25
?
No
Why am I watching that I don't even have any motorcycle
har en derbi senda extreme 2018. måste man ha dragit pluggen för att göra wheelies
Nej
Sick bike man (i have the same)
so when you remove the clutch do you have to do it like super fast?
When you jump back on your seat you release the clutch, and yes you just drop the clutch so it flies forward
haha engelskan e perfa
Tackar, Im verry god englch
what is your rear sprocket size
65
lean back more so it stays up easier
but you also have to be careful with leaning, because it can put too much weight on the back side and cause a loop
älskar din dialekt
Tackar
when i rev my bike and drop my clutch my bike doesnt even come up
any tips ?
Rev more, and rev when your right about to hit the powerband
Is 13:53 gear ratio good?
It works, but it might be hard if you don’t have an unresteicted exaust
@@IceMotoSweden im thinking about buying a new exhaust for a derby senda, any recomendations?
@@zedrexx9597 Enox maby
@@zedrexx9597 enox is best for 50 cc or remove the catalysator and restrictiosn from the pipe
Got an unrestriced Rieju MRX Pro 2008 (KTM Livery), full gianelli sports exhaust, ratio 13/53. Top Speed 97. Easy to pop wheelies.
Whats bike name
how did it take u to be good at wheelies, and did u know how to wheelie before the 50cc, for example on a bike?
being good at bicycle wheelies will not help at all
How to use the cuplung
what is the top speed?
How old are you man?
vilken jävla setup
Fet va
Can you brake with the engine in a two-stroke?
no. dont do it.
It's fine for short distances but don't do it for very long
if your 2 stroke needs an oil and fuel mixture, its best to give it throttle sometimes as the fuel and oil gets shut off, while the piston keeps moving, so like i said, give it throttle sometimes when engine braking
Do you need the clutch in 2nd gear ?
you do
@@benimatyus Thanks i will try that if i get my drivers license
@@quintenbuijs9480 just be careful bro, and always wear a helmet + back protection if possible. ;)
@@benimatyus if i train wheelie i will do it on a parking space so its safe for me and the people around me :)
Så du har inte dragit pluggen???
Nej
@@IceMotoSweden hoppet finns fortfarande
@@gabrielanderssonbergstrom4748 alltså jag vet inte om jag har en plugg utan jag har en blindtarm på kröken
@@IceMotoSweden Ingen ostrypt cdi heller??
@@gabrielanderssonbergstrom4748 jo
140 yx+throttle=wheelie
3:17 What gear are you in?
2
kopplingskickar du?
Ja
what sprocket u got in the back?
59
65
@@IceMotoSweden would it be possible with i think a 14 and a 59
First gear ?
Yes
Cpi sm 50 har jag sett på markerplace
the actual best way to wheelie is enox
rallienklanti
Har du orginal cdi?
Nej
tack grabben
Top speed?
60km/h
ᴘʀᴏᴍᴏsᴍ 😀
Satan bra engelska ju
Is it harmfull for your bike
Broski that’s not a stock bike
Hur kommer det sig att du inte trimmat?
Får inte för päronen
@@IceMotoSweden säg inget då? köp ostrypt ecu eller cdi eller va de heter och sen kanske ett nytt rör
@@nocconocco69 ett nytt rör märker farsan
Ostrypt cdi…
dont do engine braking
I can wheelie 25 kmh with my 50cc stock monkey
3th gear
👍
that thing sounds like it going to fall in to pieces holy shit
Yea, sorry
@@IceMotoSweden next time you make a video. Please at least make it sound good and fix that thing. Did it break on the way home ? 😂
@@souvlakiisnijs7331 the camera?
@@IceMotoSweden no the bike itself don’t you hear the sound comming of that thing 😂
@@souvlakiisnijs7331 bro has never heard a 2stroke before
du kan prata svenska de e bara dem som kållar på dina vids
@@sixtenkarlsson-co4cu nope
@@IceMotoSweden okej
bro delete the video we can see your face
😳
Or...Get a real dirtbike👏
Idk why but i cant get my bike up (70cc)
Just practice alot
går de med original cdi också?