1947 Harley Flathead Build - Installing a VL Springer on a Panhead Frame

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 13

  • @podthewelder
    @podthewelder 2 роки тому +1

    Rad !!! I’ve got some cups that use regular sealed (wheel) bearings with the correct bore. I run an uncut VL Springer on my 49 Panhead with BT Rockers and a star hub. Just had to machine down the spacers to fit as the VL springer is 1/2” narrower than your typical knuckle springer.
    Good stuff!!!!
    -Pod-
    🏍🤙🍻

  • @Snorky_88
    @Snorky_88 2 роки тому

    My uncle had a old milling machine and lathe from like the 40s-50s that thing weighed a million pounds. But it never failed! No digital readout all done by hand. I been dying for a nice lathe and milling machine. This is some fine work. When you have the right tools you can make anything. Having your own machine shop is awesome. Looks like some quality work on old school shit! 👍🏻 your talented my friend not many people know this stuff anymore!

    • @ChucksCycles
      @ChucksCycles  2 роки тому

      I don't know how I got by before I had a lathe. Its probably the tool I use the most. Thanks for your support and thanks for watching!

  • @deadheadlights
    @deadheadlights 3 роки тому +1

    Good idea and well executed!
    Thanks for the upload!

  • @johnjames9799
    @johnjames9799 3 роки тому

    Sure does help having the equipment to do the job correctly..I believe it's gonna be a nice bike.

    • @ChucksCycles
      @ChucksCycles  3 роки тому +1

      Its true, its taken me many years to collect equipment, but there's always something else I need.

  • @mobilegarage9312
    @mobilegarage9312 3 роки тому

    Been waiting for this!

    • @ChucksCycles
      @ChucksCycles  3 роки тому +1

      Thanks, Im going to try to get it done this winter, now that Im caught up on other work.

  • @jerrybigrig
    @jerrybigrig 7 місяців тому

    😎👍😎

  • @ZiggyNobrakes
    @ZiggyNobrakes 3 роки тому

    Pretty trick! Are you going to be running a star hub and drum with the VL front end?

    • @ChucksCycles
      @ChucksCycles  3 роки тому +1

      Yes, star hub with knuckle brake setup.

    • @ZiggyNobrakes
      @ZiggyNobrakes 3 роки тому

      @@ChucksCycles I think this might be a 1 year only issue I’ve encountered, but will you have to offset the rim to address the springer being narrower than a BT?

    • @charleslawrence6553
      @charleslawrence6553 3 роки тому +1

      @@ZiggyNobrakes yes, In fact I’m having to modify the spokes on the left side in order to get the rim centered.