Hello, I’m Kaz. Thank you for coming back to my channel. I really appreciated it. If you like my video, don’t forget to subscribe and turn on notification “on”. Any kind of feedback is more than welcome. I will reply all of the comments within 24hours. Thank YOU!! 00:00 | Introduction 00:17 | Opening Box 01:08| Upper fuselage Assembly 02:04 | Cockpit Assembly 04:33 | Nose Landing Gear Assembly 06:51 | Lift fan assembly 07:17 | Air Intakes Assembly 08:03 | Lower Fuselage Assembly 08:36 | Weapon Bay Build 11:57 | Engine Nozzle Build 13:20 | Fuselage Assembly 14:11 | EOTS sensor Assembly 15:20 | Fuselage Paint Work 19:52 | Decal Work 21:47 | Engine Nozzle Build 25:15 | Main Landing Gear Assembly 25:52 | Central Weapon Bay Covers Build 26:23 | Missile painting 27:48 | Ejection Seat, Pilot and Cockpit Build 33:07 | Canopy work 34:55 | Fuselage Weathering 41:55 | Final Show
Good work. Though I noticed some irregularities of your decals. The tail says "HMS Queen Elizabeth". Yet, it as US Markings. Not the British Marines roundel. I didn't realise there are US Marines F-35s operating with the British Royal Navy.
Thank you for your comment. Yes it is cross deck operations in HMS Queen Elizabeth in November 2021. Actually I did not know neither until one of the viewers pointed and i looked up.
A wonderfully skilled build, a lot of modellers with this level of talent go on to add weathering and chipping, which, whilst realistic I think sometimes ruins the overall look of the model, it's refreshing to see a finished kit just clean and in the colour scheme it would have left the factory. A top job sir. 🫡
Thank you so much for your comment. Yes weathering to 5th generation air craft is kind of dilemma. Still trying to find out what is the best for the model…
I build a lot of Star Trek or other Sci-Fi related models. I want to get into more real life models/aircraft because I know they are more involved and take more skill. I think your channel will be perfect to learn from. Thank you for the detailed descriptions of what tools and paint you're using. I think the tamiya F-35 will by my first
Great build. The masking really paid off as the thin lines with that color way look crisp and tidy. And I haven't built a plane yet, but this build and the immense detail of this kit may have sold me on giving this a try. Tamiya engineering as well. No fuss. I'm hoping to see a video soon that's sponsored by Tamiya. 😊 You create nice builds, and I hope others also appreciate the tips and explanation of work along the way. It's a nice touch.
A great video. I am about to start one myself and picked up a load of great hints & guidance! If it is half as good as yours I will be delighted! I am also going for the "Beast Mode" with all doors open to show the fabulous detail on this kit.
Thank you so much for your comment and sharing your story! Yes building F35 in beast mode ins one of the highlight of the kits. I’m going to try F35 in flying mode some day!
Very nice done on the build! But one thing.. The HMS Queen Elizabeth is UK aircraft carrier and not US. You mixed them up and put both US and UK sticker on
I am kind of ashamed that I did not know when I go back to instruction, HMS decal was correct. It was cross deck operations on HMS Queen Elizabeth, November 2021. Thank you for pointing out anyway!
Thank you for your comment. That means a lot. I hope you enjoy phantom too! I have built and crated a video for phantom too👍ua-cam.com/video/3C4n3sRaLUA/v-deo.htmlsi=cW_uxS6qVES4-poR
Thank you “always ”for your comment and appreciated interesting my video. That means a lot to me. It is truly fun to have an interaction with people on UA-cam 😁👍
댓글 감사합니다! Thank you so much for your comment! Yes Tamiya kit is great. Every single parts is well precisely designed. I feel the spirit of Tamiya engineers. Also cost competitive I think. Good price!
Thank you for your comment and suggestion. I closed canopy this thime because of vertical landing configulation. I will try tint canopy next time, thanks!
I am in love with the F35 and this kit so beautiful. Tamiya sure did knock it out of the park when they release this. I got the 1/72 F35A from Hasagawa and I can't wait to build mine. I have like, comment, and sub your channel!
Thank you very much. That means a lot to me. I used to be big fun of F15but once I saw this F35 real and came to know many features of 5th generation fighter jet, I am now big fun of F35👍
Built the 1/48th Tamiya F-35A which is the Air Force version. Great kit when it comes to fit, the only bad thing is the molded on RAM tape that should have been flat not raised and it ruins the realistic look it otherwise would have had. You can do better Tamiya
Thank you so much for your comment! Agreed that Tamiya is one of the best kit for me. I’m always impressed by its quality. Thanks also for the RAM information. I built F35A too, and good to know.
wish Bandai would make almost color accurate military model kits of stuff like these, F-35, Abrams etc. like they already make 100% color accurate gundam model kits, i imagine military model kits would be harder to make color accurate right out of the box so just having the big colors right is enough for me, since these kinds of glued and painted model kits are beyond my skill and patience.
Thank you so much for your comment. Duplicating the actual fuslage color is one for the highlight for modeling. Some of the kit has originally colored parts on it but you are right, most of the colors are not accurate.
Thank you so much for your comment and feedback. Yes you are right on vertical landing configulation, the weapon bay should be half open to make air flow stable. And it’s too heavy to land vertically with bombs on bay and even half fuel should not be left. I built in with bay full open and bombs inside for the sake of modeling. Thank you for your feedback anyway!!
This is very old school modelling, no pre or post shading, no weathering, painting directly on sprues, weird semi gloss finish, exactly like hasegawa catalog models back in the nineties. You should check out Plasmo or Night Shift they're true masters at modern modelling.
Thank you so much for your comment and question. V-22 Osprey is not in my radar even though it looks so cool actually osprey is flying Maybe sometime in the future!
Thank you so much for your comment and feedback! For your information, It was cross deck operations on HMS Queen Elizabeth, November 2021. Thank you for pointing out anyway!
Hey Kaz, the model looks great! Another super looking F-35 to add to your collection :D. What sprue cutters do you use? They look very sharp and accurate. Great video, can't wait to see what you build next!
Thank you for your comment and question! I understand that panel line is RAM paint after main fuselage paint. I did apply clear vernish coat and let them dry for 24 hours because applying masking tape may damage the paint. I hope that answers your question. Please let me know if you have further questions!
Thank you for your comment and feedback. You are right. It is too heavy to vertical land with those weapon and even half amount of fuel. But I built it in beast mode in the sake of appearance of model, thanks!
Thank you for your comment and pointing out back ground noise. I film inside but may be some noise came from somewhere. I will watch out next time. Thank you again!!
Thank you so much for your comment and question. I would use Tamiya white, black, dark sea grey and gum metal as X-2 : X-1 : XF-54 : X-10 = 3 : 3 : 3 : 1. It depends on your preference how much grossly look after painting. By adding gun metal more percentages would be able to achieve that. Thank you!
@@platoki Thanks for your detailed answer, keep working ~~ I wanna build Hasegawa F35B in flight status, already done with one by vertical landing status before.
@allen7573 you are very welcome. Flight status is actually cool looking, very streamlined. I would need to get stand first 👍 Please let me know if you have any more questions thanks!
I am curious - at 39:19 the vertival stabiliser is fitted and I notice the marking of HMS Queen Elizabeth. The remainder of the aircraft is American marked. Does this mean the HMS QE is British operated but with a USA flight crew ?
Thank you for your comment and close look of the video. Appreciated it. That theme is cross deck operations on HMS queen Elizabeth on November 2021. Actually I am ashamed that I did not know that when I built this model. One of the viewer of the video told me. Thank you for pointing out anyway!
Sure! That is not cutting board. I just use normal poster board (like for elementary students) which is available at Walmart, Target or Michael’s. That brand is “heavyweights poster board Pen+Gear”. Any kind is ok I think. I use gross one rather than mat one. Please let me know if you have further questions!
I have a humble request that you build the ZVEZDA mig-27 flogger D, as I just got it as a surprise gift from my parents, but since this is my first set.... I have no idea how to build it.
Thank you so much for your comment and feedback! And congratulations on your first model! I do not have same model mig-17 flogger with you but I have one camouflage fighter jet, so let me go and prepare.
It is not exact the same model but I uploaded SU-27 camouflage. I hope it can be a little reference for your model. Please check if you have a time, thank you! ua-cam.com/video/LItSmyCHjTs/v-deo.htmlsi=xp92DARqXd0hbdd8
@vladimirlovato4192 it is a little rough operation but this Gollira glue does not harm paint. At least, Tamiya acrylic or AK color. Need to be careful because evaporated glue sometimes leave white residues, so need to dry soon or have to wipe off with alcohol if it happens. But it works and very strong. a.co/d/5KXwUQP
Thank you for your question! That is “Tamiya Craft Bond - Water based type”. It becomes transparent after time and wouldn’t attack paint so easy to use. Please let me know if you have any questions!
Thank you so much for your comment and question. That song is called Yukyu no Toki Japanese song. It means “To the Eternity of Time”. Please let me know if you have any questions thanks!
Thank you for your comment and again appliciated close look for my video. It was cross deck operations on HMS Queen Elizabeth, November 2021. It’s kind of shame that I didn’t know before building this model. One of the viewers pointed this out. Thank you for pointing out anyway!
@@platoki Oh, OK. I thought it was going to be about some loaner thing where the Marines had some planes and pilots stationed on our carrier for a while!
@@platoki It was a huge comic catastrophe for the government - we had this state of the art multi billion pound carrier and no aircraft to put on it. I seem to remember something about borrowing aircraft from the US until the ones we'd ordered were delivered. This was the Navy that was victorious at Trafalgar, but things have gone downhill since then!
@BenjWarrant I am kind of ashamed that I did not know when I go back to instruction, HMS decal was correct. It was cross deck operations on HMS Queen Elizabeth, November 2021. Thank you for pointing out anyway!
Would it be asking too much to leave your captions up for more than 3 secs? Loved the work but continually having to pause or even jump backwards to read your explanations was a huge pain the butt!
Thank you for your comment. Yes also the number of parts are amazingly a lot. If they prefer smaller numbers of parts, and shorter building time, 1/72 Tamiya might be a good option. Here is your reference thank you! ua-cam.com/video/V3dY9WM94po/v-deo.htmlsi=EvS4kkvYZLnatZve
You’re very good and I enjoy watching people who are good, but I am also totally stunned by how good this Tamiya kit is, I can’t see how there could be any F 35 kit better than this
You did an amazing job! There's just one thing I wanted to point out. It's listed as a US Marines aircraft, but it's got the HMS Queen Elizabeth, a UK aircraft carrier on the tail at 39:21. en.wikipedia.org/wiki/HMS_Queen_Elizabeth_(R08)
Thank you so much for your comment and appreciated your feedback . Yes it was mentioned by someone else too. I will keep in mind next time building the model, thank you again!👍
Hello, I’m Kaz. Thank you for coming back to my channel. I really appreciated it. If you like my video, don’t forget to subscribe and turn on notification “on”. Any kind of feedback is more than welcome. I will reply all of the comments within 24hours. Thank YOU!!
00:00 | Introduction
00:17 | Opening Box
01:08| Upper fuselage Assembly
02:04 | Cockpit Assembly
04:33 | Nose Landing Gear Assembly
06:51 | Lift fan assembly
07:17 | Air Intakes Assembly
08:03 | Lower Fuselage Assembly
08:36 | Weapon Bay Build
11:57 | Engine Nozzle Build
13:20 | Fuselage Assembly
14:11 | EOTS sensor Assembly
15:20 | Fuselage Paint Work
19:52 | Decal Work
21:47 | Engine Nozzle Build
25:15 | Main Landing Gear Assembly
25:52 | Central Weapon Bay Covers Build
26:23 | Missile painting
27:48 | Ejection Seat, Pilot and Cockpit Build
33:07 | Canopy work
34:55 | Fuselage Weathering
41:55 | Final Show
I love Tamiya. I think he's the ultimate modeler. Watching this video made me dream of continuing to challenge myself with master craftsmanship.
Thank you so much for your feedback. That means a lot… I’m also trying to challenge myself.modeling is so fun 😊
Good work. Though I noticed some irregularities of your decals. The tail says "HMS Queen Elizabeth". Yet, it as US Markings. Not the British Marines roundel. I didn't realise there are US Marines F-35s operating with the British Royal Navy.
Thank you for your comment. Yes it is cross deck operations in HMS Queen Elizabeth in November 2021. Actually I did not know neither until one of the viewers pointed and i looked up.
A wonderfully skilled build, a lot of modellers with this level of talent go on to add weathering and chipping, which, whilst realistic I think sometimes ruins the overall look of the model, it's refreshing to see a finished kit just clean and in the colour scheme it would have left the factory. A top job sir. 🫡
Thank you so much for your comment. Yes weathering to 5th generation air craft is kind of dilemma. Still trying to find out what is the best for the model…
Very true…weathering sometimes ruins the build and looks way too much exaggerated!
I build a lot of Star Trek or other Sci-Fi related models. I want to get into more real life models/aircraft because I know they are more involved and take more skill. I think your channel will be perfect to learn from. Thank you for the detailed descriptions of what tools and paint you're using. I think the tamiya F-35 will by my first
Thank you for your comment! That means a lot… hope you enjoy F35 kit! This kit is awesome 👏
Honestly this is one of the best Tamiya kits I've ever seen. The engineering is perfect! and the model looks amazing!
Thank you for your feedback! 100% agreed. Tamiya kit is more than amazing. And this kit is one of the best.
After watching your video, all I can say is wow. Great job with a lot of amazing details. Thanks for sharing and the inspiration.
Thank you so much for your comment and compliment. That means a lot to me and motivated me much to create another video, thanks.
Terrific video. I'm now retired and am starting on planes and choppers. Boats and tanks. Newly subscribed
Thank you so much for your comment and subscribe! I’m glad you liked my video🤲
You are a master at your craft. Very much looking forward to your future builds.
What a wonderful comment…appreciated it. That means a lot to me and good motivation to create another video.
Those landing gear struts... amazing.
Thank you so much for your comment! Appreciated it 🙏
Appreciate you sharing it, thanks.
Magnificent work! Now I want to go out and build this kit!
Thank you so much for your comment!! That means a lot. Hope you enjoy modeling👍
Finally found the ultimate time killer hobby 😂
Thank you for your comment! Yes model is the life time hobby for me😁
An absolutely amazing job. Incredible. A work of art.
Thank you so much for your comment! That means a lot. thanks for watching my video!!
Классный набор и инструменты. Спасибо за ролик
Thank you for your comment!! Appreciated it.
Nice, quality build. Good attention to detail. Well done!
Thank you for watching my video. That means a lot to me.
Great build. The masking really paid off as the thin lines with that color way look crisp and tidy.
And I haven't built a plane yet, but this build and the immense detail of this kit may have sold me on giving this a try. Tamiya engineering as well. No fuss.
I'm hoping to see a video soon that's sponsored by Tamiya. 😊 You create nice builds, and I hope others also appreciate the tips and explanation of work along the way. It's a nice touch.
Thanks a lot. Yes I wish Tamiya sponsor me😁but without it, it is worth building it. That’s great engineering, the spirit of Tamiya…
Amazing skills and very therapeutic to watch.
That means a lot. Thank you so much for your comment and watching my video!
A great video. I am about to start one myself and picked up a load of great hints & guidance! If it is half as good as yours I will be delighted! I am also going for the "Beast Mode" with all doors open to show the fabulous detail on this kit.
Thank you so much for your comment and sharing your story! Yes building F35 in beast mode ins one of the highlight of the kits. I’m going to try F35 in flying mode some day!
Very nice done on the build! But one thing.. The HMS Queen Elizabeth is UK aircraft carrier and not US. You mixed them up and put both US and UK sticker on
Thank you for comment and feedback. I noticed that US flag on lift fan cover is swapped. Thanks again for pointing out!
I am kind of ashamed that I did not know when I go back to instruction, HMS decal was correct. It was cross deck operations on HMS Queen Elizabeth, November 2021. Thank you for pointing out anyway!
You are a master craftsman!.I have the same kit and will be building it soon,i must finnish the Tamiya Phantom first.
Thank you for your comment. That means a lot. I hope you enjoy phantom too! I have built and crated a video for phantom too👍ua-cam.com/video/3C4n3sRaLUA/v-deo.htmlsi=cW_uxS6qVES4-poR
That is an amazing build with a beautiful finish......what a result! A really, really good watch 👌🏻👍🏻👏🏻
Thank you “always ”for your comment and appreciated interesting my video. That means a lot to me. It is truly fun to have an interaction with people on UA-cam 😁👍
대단히 멋지고 저 또한 만들어 보고 싶어졌습니다. 키트가 참 대단합니다.
댓글 감사합니다!
Thank you so much for your comment! Yes Tamiya kit is great. Every single parts is well precisely designed. I feel the spirit of Tamiya engineers. Also cost competitive I think. Good price!
Only recommendation is maybe tint the canopy and have it at open position. I have built several f-35s that’s the only one I regret not doing
Thank you for your comment and suggestion. I closed canopy this thime because of vertical landing configulation. I will try tint canopy next time, thanks!
That looks amazing, Great job. I'm in the process of building mine now.
Thank you so much for your comment! That’s very good timing . I’m looking forward to your building F35B too!
Is this a TAMIYA ad? Hahaha jk love the finished product!
Thank you for your comment. I wish! Haha. TAMIYA product is great👍
Brilliant model build, just superb.
Appliciated your comment! Thank you so much.
スゲえ!まさに芸術。
コメントありがとうございます！嬉しいです😇
Great kit and work!
Thank you so much for your comment! Appreciated it!
Watching you do yours before I do mine!
Thank you so much for your comment! That is quite a compliment to me. Enjoy your model!
Awesome models fantastic job thanks for sharing
Thank you for your comment. That means a lot.
Fantastic build
Thank you so much for your comment!
I am in love with the F35 and this kit so beautiful. Tamiya sure did knock it out of the park when they release this. I got the 1/72 F35A from Hasagawa and I can't wait to build mine. I have like, comment, and sub your channel!
Thank you very much. That means a lot to me. I used to be big fun of F15but once I saw this F35 real and came to know many features of 5th generation fighter jet, I am now big fun of F35👍
Watch your six, you got a new follower to your channel
Thank you so much for your comment and feedback. That means a lot. I’m so glad my video somewhat interest you. Thank you!!
Awesome work
Thank YOU for watching!
Fantastic build!
Thank you so much for your comment!!!
Built the 1/48th Tamiya F-35A which is the Air Force version. Great kit when it comes to fit, the only bad thing is the molded on RAM tape that should have been flat not raised and it ruins the realistic look it otherwise would have had. You can do better Tamiya
Thank you so much for your comment! Agreed that Tamiya is one of the best kit for me. I’m always impressed by its quality. Thanks also for the RAM information. I built F35A too, and good to know.
wish Bandai would make almost color accurate military model kits of stuff like these, F-35, Abrams etc. like they already make 100% color accurate gundam model kits, i imagine military model kits would be harder to make color accurate right out of the box so just having the big colors right is enough for me, since these kinds of glued and painted model kits are beyond my skill and patience.
Thank you so much for your comment. Duplicating the actual fuslage color is one for the highlight for modeling. Some of the kit has originally colored parts on it but you are right, most of the colors are not accurate.
Amazing work.
Thank you so much for your comment!!
Nice work, but I have never seen an open bomb bay while the pilot was sitting in the cockpit.
Thank you so much for your comment and feedback. Yes you are right on vertical landing configulation, the weapon bay should be half open to make air flow stable. And it’s too heavy to land vertically with bombs on bay and even half fuel should not be left. I built in with bay full open and bombs inside for the sake of modeling. Thank you for your feedback anyway!!
Amazing job!!!!👏🏻👏🏻👏🏻
Thank you so much for your comment!
Nice build!
Thank you so much!!
works excellently
Thank you!!🙏
good job! so impressed!
Thank you so much for your comment! That means a lot.
This is very old school modelling, no pre or post shading, no weathering, painting directly on sprues, weird semi gloss finish, exactly like hasegawa catalog models back in the nineties. You should check out Plasmo or Night Shift they're true masters at modern modelling.
Thank you for your feedback. Weathering on 4th generation fighter jet is pretty much dilemma.
Very impressive!!!
Thank you so much for your comment!!
와 요즘 타이야 장난 없구나 나의 마지막 타미야 1/35 m4셔먼 한 25년전
Filling different 🛩 war just design doesn't have money buying a like in model just thanks 🥰😚👍
Thank you for your comment, yes fighter jet at war does not make me happy, but I love modeling and its technology 😁
Hello, I will follow your steps, I hope my model looks like yours
Thank you so much for your comment my friend. Let us enjoy modeling👍
Very well done!!!
Thank you so much!!
nice work
Thank you for watching my video!
This looks really good. Great job! Have you thought about a V22 Osprey in her Japanese paint scheme?
Thank you so much for your comment and question. V-22 Osprey is not in my radar even though it looks so cool actually osprey is flying Maybe sometime in the future!
최고의 걸작.
Thank you so much!!
감사합니다. 감사합니다!
A US Marine aircraft with "HMS Queen Elizabeth" on it? Strange...
Thank you for your comment and question! That theme is cross deck operation at HMS queen Elizabeth on November 2021. Appreciated your feed back!
4:59 paint was not thinned and mixed correctly, you can see splatter
Thank you so much for your feedback. Appreciated it!
Excellent
Thank you very much!
Wonderful job ! Ámazing, ! 😊
Thank you so much for watching my video!!
WONDERFUL👍👍
Thank you so much!! 🙏🙏
a us marine F35 flying out of HMS Elizabeth. apart from that great build!
Thank you so much for your comment and feedback! For your information, It was cross deck operations on HMS Queen Elizabeth, November 2021. Thank you for pointing out anyway!
stunning
Thank you so much!
Hey Kaz, the model looks great! Another super looking F-35 to add to your collection :D. What sprue cutters do you use? They look very sharp and accurate. Great video, can't wait to see what you build next!
Hi brother! I use TAMIYA 74035 Sharp Pointed Side Cutter. Thank you for your comment again. Please let me know if you have any questions!
Sukhoi Su30mkm please..
Thank you for your feedback. I will put Sukhoi in my to build list.
Nice job! Question: do you apply The pannel line directly over The acrylic paint or do you Put some clear coat between them?
Thank you for your comment and question!
I understand that panel line is RAM paint after main fuselage paint. I did apply clear vernish coat and let them dry for 24 hours because applying masking tape may damage the paint.
I hope that answers your question. Please let me know if you have further questions!
Lindo trabalho. Mas não sei se decola na vertical no beast Mode.
Thank you for your comment and feedback. You are right. It is too heavy to vertical land with those weapon and even half amount of fuel. But I built it in beast mode in the sake of appearance of model, thanks!
@@platoki maravilhoso trabalho!
@thiagoctelles1 thank you so much 🙏
Nice build. Were you filming outside? Sadl,y there is quite a bit of distracting noise.
Thank you for your comment and pointing out back ground noise. I film inside but may be some noise came from somewhere. I will watch out next time. Thank you again!!
well done
Thank you so much for your feedback!
No gloss coat before decals. Do you run into problems with decal silvering?
Thank you for the question. I used AK color gross varnish before decal and used stain varnish after decal.
Another beautiful job!!
May I ask what color and work procedure you suggest, if only use TAMIYA spray can on F35 Z13 version painting?
Thank you so much for your comment and question. I would use Tamiya white, black, dark sea grey and gum metal as X-2 : X-1 : XF-54 : X-10 = 3 : 3 : 3 : 1. It depends on your preference how much grossly look after painting. By adding gun metal more percentages would be able to achieve that. Thank you!
@@platoki Thanks for your detailed answer, keep working ~~ I wanna build Hasegawa F35B in flight status, already done with one by vertical landing status before.
@allen7573 you are very welcome. Flight status is actually cool looking, very streamlined. I would need to get stand first 👍
Please let me know if you have any more questions thanks!
I am curious - at 39:19 the vertival stabiliser is fitted and I notice the marking of HMS Queen Elizabeth. The remainder of the aircraft is American marked. Does this mean the HMS QE is British operated but with a USA flight crew ?
Thank you for your comment and close look of the video. Appreciated it. That theme is cross deck operations on HMS queen Elizabeth on November 2021. Actually I am ashamed that I did not know that when I built this model. One of the viewer of the video told me. Thank you for pointing out anyway!
Can I know what kind of mat you are using for the table? Because it looks so cleaner than the cutting mat for the video
Sure! That is not cutting board. I just use normal poster board (like for elementary students) which is available at Walmart, Target or Michael’s. That brand is “heavyweights poster board Pen+Gear”. Any kind is ok I think. I use gross one rather than mat one.
Please let me know if you have further questions!
@@platoki thank you!
I have a humble request that you build the ZVEZDA mig-27 flogger D, as I just got it as a surprise gift from my parents, but since this is my first set.... I have no idea how to build it.
Thank you so much for your comment and feedback! And congratulations on your first model! I do not have same model mig-17 flogger with you but I have one camouflage fighter jet, so let me go and prepare.
It is not exact the same model but I uploaded SU-27 camouflage. I hope it can be a little reference for your model. Please check if you have a time, thank you!
ua-cam.com/video/LItSmyCHjTs/v-deo.htmlsi=xp92DARqXd0hbdd8
@@platoki Thanks! Really appreciate it....
No worries mate
Conclusion: no short takeoffs in America-class.
Are most of the pieces just clickables in place?
Epic! 👏🏻👏🏻👏🏻
Than you so much!!😁
作りました
Do you use CA glue to stick parts that have been painted together?
Thank you for your comment and question! I used Tamiya bond and cement. I also use some strong glue like CA glue to fix critical parts.
@@platoki I feel like the cement always destroys my paint 😭😭
@vladimirlovato4192 it is a little rough operation but this Gollira glue does not harm paint. At least, Tamiya acrylic or AK color. Need to be careful because evaporated glue sometimes leave white residues, so need to dry soon or have to wipe off with alcohol if it happens. But it works and very strong.
a.co/d/5KXwUQP
Top notch
Appreciated for your comment🙏
Fantástico
Eres in crack, k precision
Thank you for your comment!
Amazing!!!
Thank you for your comment!!!
@@platoki Fine Art Making I think you are using Master instead of Iwata, Mr hobby, Harder, Style quality Airbrush
@huseyindilek4115 thank you for your comment. Yes I use Master air brush!
Wow
Thank you!!
40:45, what is that white glue you are using?
Thank you for your question! That is “Tamiya Craft Bond - Water based type”. It becomes transparent after time and wouldn’t attack paint so easy to use. Please let me know if you have any questions!
Why tech design can do in model plastics , It's true real scale .
So when's the test flight?
Maybe next Sunday 😁
What's the music called in the "Final Show" part of your video?
Thank you so much for your comment and question. That song is called Yukyu no Toki Japanese song. It means “To the Eternity of Time”. Please let me know if you have any questions thanks!
@@platoki thx for the information, I like your video on 1/48 F-35B lightning, it's very detailed and realistic
@danzigschwaiger5032 I appreciated for your comment. That means a lot.
Which shop available?
Coming soon!
What paint scheme is this? On the decals it says marines and HMS Queen Elizabeth.
Thank you for your comment and again appliciated close look for my video.
It was cross deck operations on HMS Queen Elizabeth, November 2021. It’s kind of shame that I didn’t know before building this model. One of the viewers pointed this out.
Thank you for pointing out anyway!
@@platoki ok. Thanks cool to know!
@TJFNixon thank YOU for question!
Sorry, but.... all that intricate masking starting around 17:00.... F-that! I'll wait for a separate 3rd-party masking set or decals.
Thank you for your feedback. I will try 3rd-party masking next time👌
US Marines on HMS Queen Elizabeth II? What's that about?
Thank you for your feedback. Yes some people pointed out. The decal on vertical tail fin was not correct. I will keep in mind next time, thanks!
@@platoki Oh, OK. I thought it was going to be about some loaner thing where the Marines had some planes and pilots stationed on our carrier for a while!
@BenjWarrant that’s interesting corroboration!
@@platoki It was a huge comic catastrophe for the government - we had this state of the art multi billion pound carrier and no aircraft to put on it. I seem to remember something about borrowing aircraft from the US until the ones we'd ordered were delivered.
This was the Navy that was victorious at Trafalgar, but things have gone downhill since then!
@BenjWarrant I am kind of ashamed that I did not know when I go back to instruction, HMS decal was correct. It was cross deck operations on HMS Queen Elizabeth, November 2021. Thank you for pointing out anyway!
Porque no pinto los misiles?
Thank you for your comment. Missiles are painted and weathered a little, thanks.
one word to describe this: sexy.
Thank you for your comment! I love that! Appreciated for your compliment!
Would it be asking too much to leave your captions up for more than 3 secs? Loved the work but continually having to pause or even jump backwards to read your explanations was a huge pain the butt!
Thank you for your comment and valuable feedback. No problem I will keep in mind to make caption longer next time making videos. Appreciated it!
For the latest video, I made comment leave much longer. Please check if you have a time, thank you!
The amount of masking scares me off from buying to build...
Thank you for your comment. Yes also the number of parts are amazingly a lot. If they prefer smaller numbers of parts, and shorter building time, 1/72 Tamiya might be a good option. Here is your reference thank you!
ua-cam.com/video/V3dY9WM94po/v-deo.htmlsi=EvS4kkvYZLnatZve
You can get pre cut masking for it now mate 👍🏻
@Ste-_. Thank you your comment and tips. I will check it out!👍
👏👏👏♥️♥️♥️
Thank you thank you!!!!👍
Subscribing now
Thank you. Appreciated it!
You’re very good and I enjoy watching people who are good, but I am also totally stunned by how good this Tamiya kit is, I can’t see how there could be any F 35 kit better than this
@DerekFleming-rr5yc completely agree. I can see spirits of Tamiya engineering.
Weathering…….🤷🏻♂️
Thank you for your comment!
Крутая модель,привет из России,сам люблю собирать,но сейчас в госпитале после ранения, у самого КВ1 на половину склеян,вернусь с войны доклею
Thank you so much for your comment. Hope to recover soon and enjoy modeling soon.
You did an amazing job! There's just one thing I wanted to point out. It's listed as a US Marines aircraft, but it's got the HMS Queen Elizabeth, a UK aircraft carrier on the tail at 39:21. en.wikipedia.org/wiki/HMS_Queen_Elizabeth_(R08)
Thank you so much for your comment and appreciated your feedback . Yes it was mentioned by someone else too. I will keep in mind next time building the model, thank you again!👍