I noticed some of the clippers you tested are open and some closed of course the clipper runs slower open instead of closed just thought id mention that test em all closed to be fair!!!
Great Video CONTENT bro😍😍 you just mentioned me for the first time so unexpected lol. Was this a dream come true??!😭😆😂 I didnt expected that you took that comment seriously haha. Thank you very much, Im really getting a lot from you with these RPM clippers test.. really helped a lot, I have also helped a lot of people around here in our country bc of you sharing my knows about the best clippers at their budget at the desired power of clipper...
Im wondering why Kemei is not increasing their RPM not only trimmers but also clippers????! They really do good machines but they are losing in the RPM race!!
Which is best out of this two? VGR-V290 or VGR-V071? Please let me know. I am planning to order VGR-V290. I have hard beard. I heard that VGR071 has 7000 rpm since I have hard beard should I buy V071 or should I buy V290 just because it has digital display.
I saw a review of Kemei 1973 copy on the channel "Reis Barbearia" and there was shown that it has 6388rpm with ceramic cutting blade. Could you make another test of your Kemei 1973 wit a good oiled blade? The video I mean: GALLETZ GT-6 REVIEW COMPLETO COM TESTE DE RPM. Also I'd like you to make an RPM test of Kemei TX1. Thank you.
@@edounboxingofficial yes I downloaded and it's the only one which works that I have tried, all others they would work fine with some clippers and other clippers they would jump up and down in rpm erratically, but RPM Guage works with all my clippers. Did take quite a bit of fiddling with the settings to get consistent readings though.
8:13 I really wander the RPM Speed of this clipper after you showed this on your past video HAHAHA, I think its about only 1000RPM now the moment of truth told it was 3500RPM
@@edounboxingofficial you can actually put the wires inside and directly connect it to the motor instead of the board, there is actually a video of it by Sampitz the Hobby Barber.
@@edounboxingofficial And this one ua-cam.com/video/DTfUFW6AsjA/v-deo.html I actually havent watched this one but its almost the same thing maybe. You can check it out
That rpm app is cool my babyliss trimmers run a tic over 7200 and the gold trimmer I got like your runs a 6650 with the wahl blade I didn't think it would lol but the LCD say it runs at 6500 for it to be more I couldn't believe it but I really dont know how accurate the app is do u believe what it saids
@@edounboxingofficial when you are having a good contents on UA-cam and wanna make everything seen by the world especially this barbering stuffs, you know what I mean. The more videos the better, the more people will subscribe, more earnings, more views, likes and Everything! But I cant decide about uploading it on your Channel, if you dont think about posting it, you can send it to my FB Messenger then. I Dont really know what to answer😅
I noticed some of the clippers you tested are open and some closed of course the clipper runs slower open instead of closed just thought id mention that test em all closed to be fair!!!
Yes sir...enjoying them videos bruh.
Thnx bro
9:03 the UNDISPUTED 😆 Kemei 2010!! FTW
Such a beautiful clipper
Kemei 2010 is the most beautiful clipper
@@edounboxingofficial AGREED!
@@edounboxingofficial my Dream Clipper and Wife too😂lol
Great Video CONTENT bro😍😍 you just mentioned me for the first time so unexpected lol. Was this a dream come true??!😭😆😂
I didnt expected that you took that comment seriously haha. Thank you very much, Im really getting a lot from you with these RPM clippers test.. really helped a lot, I have also helped a lot of people around here in our country bc of you sharing my knows about the best clippers at their budget at the desired power of clipper...
Yo that Kiepe Mini Trimmer and Clipper is FIRE! 9000 RPM?!
Im wondering why Kemei is not increasing their RPM not only trimmers but also clippers????! They really do good machines but they are losing in the RPM race!!
Yeah u right
Which is best out of this two? VGR-V290 or VGR-V071? Please let me know. I am planning to order VGR-V290. I have hard beard. I heard that VGR071 has 7000 rpm since I have hard beard should I buy V071 or should I buy V290 just because it has digital display.
What app is that
I saw a review of Kemei 1973 copy on the channel "Reis Barbearia" and there was shown that it has 6388rpm with ceramic cutting blade. Could you make another test of your Kemei 1973 wit a good oiled blade? The video I mean: GALLETZ GT-6 REVIEW COMPLETO COM TESTE DE RPM.
Also I'd like you to make an RPM test of Kemei TX1. Thank you.
Ceramic blade is not heavy like the metal blade and Ceramic Blade doesnt heat up quickly. I don't have TX1 anymore
@@edounboxingofficial I measured my VGR V-056 with original steel blade: 6056 RPM.
Bro where is VGR v-063???
We need a full comparison for VGR v-063 vs Kemei i5s!!!!!
I dont have it anymore but I bought it again and when I received it then I will make a comparison.
Bro subscribe to my UA-cam channel
What?! Kemei 1973a only has 5700 RPM?
8:01 laugh... super
Whats the app name
I’ve been trying to find out for the longest
Me too
Hello! Which one do you think is the best chinese trimmer and clipper to buy?
Kemei 1986 and Kemei 1973
@@killak3648 1986 better
My jrl 2020c 5984 rpm 2gear
what is the rmp app you use?
RPM Guage
@@edounboxingofficial thanks bro, I've been looking for one for a while 👍🏽
@@elliottharrop5031 ok. For me it a good app
@@edounboxingofficial yes I downloaded and it's the only one which works that I have tried, all others they would work fine with some clippers and other clippers they would jump up and down in rpm erratically, but RPM Guage works with all my clippers. Did take quite a bit of fiddling with the settings to get consistent readings though.
@@elliottharrop5031 good
Vgr v290 better or v927?
Do you prefer Kemei 1973 or Diavel mini and why?
Nooooo. Diavel Mini is not a budget trimmer
@@edounboxingofficial so diavel is better?
@@derejzor that without a doubt
8:13
I really wander the RPM Speed of this clipper after you showed this on your past video HAHAHA, I think its about only 1000RPM now the moment of truth told it was 3500RPM
I really don't know what to with that clipper
@@edounboxingofficial you can actually put the wires inside and directly connect it to the motor instead of the board, there is actually a video of it by Sampitz the Hobby Barber.
@@edounboxingofficial
And this one
ua-cam.com/video/DTfUFW6AsjA/v-deo.html
I actually havent watched this one but its almost the same thing maybe. You can check it out
nice video
Thnx bro
1973 is sooo nice
My fried how are you ? What is name from app RPM? tranks
play.google.com/store/apps/details?id=jp.nas.giri
@@edounboxingofficial Tranks men
You should check out the ORIHEA clipper.. I like it and it’s 60% off right now on Amazon at check out
Ok, let me check
I couldn't find. Send me the link
@@edounboxingofficial I believe RichNatural encountered a problem on it so maybe he can chime in on the details for the Orihea
@@edounboxingofficial Brand: OriHea
4.6 out of 5 stars 13 Reviews
OriHea Professional Hair Clippers for Men, Hair Beard Clipper Low-vibration Hair Trimmer Beard Trimmer Hair Cutting Grooming Kit with LED Display (Matte Black)
That rpm app is cool my babyliss trimmers run a tic over 7200 and the gold trimmer I got like your runs a 6650 with the wahl blade I didn't think it would lol but the LCD say it runs at 6500 for it to be more I couldn't believe it but I really dont know how accurate the app is do u believe what it saids
I do cuz I also compare it with my laser Tachometer and it pretty the same
@@edounboxingofficial ok cool
Can Reviews vgr v288?
Vgr V288 is not on my budget but something similar is coming
Nice!
I doubt that that KEMEI 2024 had that 7100RPM I think its too powerful, maybe it needs an actual tachometer.. wdyt?
I just test this Kemei again with a laser tachometer. Do u want me to upload it on UA-cam?
@@edounboxingofficial when you are having a good contents on UA-cam and wanna make everything seen by the world especially this barbering stuffs, you know what I mean. The more videos the better, the more people will subscribe, more earnings, more views, likes and Everything! But I cant decide about uploading it on your Channel, if you dont think about posting it, you can send it to my FB Messenger then. I Dont really know what to answer😅
@@edounboxingofficial but Im actually interesting to see that though
Woah, that VGR got 7300RPM?! HOW?
Yes, but the blade is not good
App Name bro ?
Rpm Guage
@@edounboxingofficial thx
🙏🙏🙏
Bro what is the name of the app? Any link?
play.google.com/store/apps/details?id=jp.nas.giri
Would u sell any clipper
Which one u wanna buy cuz I will buy too
@@benin4life the diavel one
Inalso want the 1973
Pray to win the Giveaway. I will play it live on UA-cam or Instagram
@@edounboxingofficial 🤞🤞
@@edounboxingofficial cant wait bro, at what time will you do the stream?