Extremely Rusty Antique Angle Grinder Restoration
Вставка
- Опубліковано 18 вер 2024
- Extermely Rusty Antique Angle Grinder Restoration
Restoration Video Overview
This Extremely Rusty Antique Angle Grinder was sent to me by a subscriber in Germany it was so full of rust & Mud And the System inside it was completely stuck due to rust.I decided to restore it And separated all its parts Its internal mechanism was badly damaged due to rust.But I cleaned it thoroughly again and ended the rust completely. And the Grinder was also made new again.Now it was as good as new And I sent it again to my subscribers After Full Restration.
#restoration #restorationvideos #restoring #antique #repair #rescue #antiquerestoration #antique - Розваги
судя по отсутствию ржавчины на винтах и аллюминии, болгарку просто обмазали грязью и на недельку оставили. опять пиздеж и провокация!
Reported for fake video!
Rust on plastic😂 hmm no rusty screws?😂 Fake title.
AND rust on plastic and aluminium 😂😂😂
You need to watch some real restorations then
BeatiuFul
Thank You
Я узнал её с первых секунд!!))
,,Makita GA-5030" !!!
Хороший аппарат!
Особенно, когда только-что из магазина!)))
In what place is it antique?! Is he from the 19th century? And the work is great, yes
Depends how old that thing is.. an antique is anything 50 years or older. If that was made before 1974 it's antique
great job mate,brand new now.
جيد انك وضعت الطين لكي يجف والدليل هو من البلاستيك 😅😅😅😅 ياللهول hhhhhhhhhhh
😅😅😅😅
Friend, where do these objects that you restore come from? from the bottom of the sea or a river?
Click Bate
Great Work
Обляпали грязью,подождали пока высохнет...
И ресторатион!!!🤔🤔🤔😂😂😂
That's underground
Perfect 👌
Vai ganhar dinheiro na internet as de verdades e não essas farsas com peças cheias de massa.
I take back my praise. The work is structured. Assemble back on rusty screws and do not clean the landing places of the motor armature brushes from rust... this is a strong restoration (no).
And he washed out grease from the bearings and dont grease at assembly :) long life garantee
Plastic doesn't rust this has been covered in something to make it look old , this looks like it's been under the sea from Noah's time, this video is a complete scam
Y eso funcionó después de ese tratamiento de martillazos 😂😂😂
😄😄
Great job on extremely rusty antique angle grinder restoration aa hands 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Nice video and presentation.
I can’t tell those are dried mud or rust.
👍👍👌
Sham. Almost no rust. Just muddy. Didn't even clean things well or bother to clean and re-pack the ball bearings.
14:34 you do it incorectly
Похоже этой болгаркой динозавры прльзовались-- а почему сохранилась так? Из сегодня в прошлое кто-то забросил, сейчас по айпи пробьем и узнаем.
It was buried in the ground for many years
12:49~12:58 you do it incorectly! It shouldn't have been broken with a hammer!
The casing was not restored but replaced. Actually, judging by the end result I would say that the whole thing was replaced.
Rust? It's sand. Where and how did you found it in that conditions? In dwarfs caves?
Fake restoration.
Come watch some real restoration work 👍
I love a great restoration but my goodness that wd40 or what ever cost more than that grinder.
đam mê thôi, chứ sửa xong, vật liệu phục hồi ngang tiền mua máy mới
Why you restorers use this kind of tools blathered in mud I can’t give you like it’s a blasfeme to real restorers
Thank you for defending us real restoration channels 👍
Телефон, чтобы снимать у меня есть. Куплю какую-нибудь дрель, помариную ее месяцок в говне с глиной, отмою, разберу - соберу, не удалив полностью остатки грязи и... Вуа-ля я РЕСТАВРАТОР!!!
😂😂😂very funny
Fake restoration
Super good job aa hand restoration nice video🎉🎉
good job
Es mas Lodo que oxido
Bravo!
Super jest ta kątówka od remontowana odrestaurowana dawno tak ona nie wyglądała Pozdrawiam serdecznie👍👍👍👍👍👍
Muito mal feito esse serviço de restauração, danificou a estrutura plástica por dentro, não limpou direito os componentes, não trocou os carvões, muito fraco esse serviço
some points to consider: I saw very little rust I saw a lot of dirt...use orange or lemon juice to wash parts? In a few days I'm going to wash my ass to wash parts with water... remove the parts as if I were having heart surgery, then use a hammer to replace them. Very amateurish.
Undertaker 😂
Не верю.
Nice refurbishing effort. While I applaud your efforts, a few things stood out to me. First, obviously you bought a new two piece case. I would have as well in this case. But your cleaning was a little lacking. You didn't take apart the bearings and clean and regrease them. And all the hardware wasn't clean either. You also attached the power wires wrong. They were supposed to go between the brass and not below the brass and plastic case. But with those issues, you did make it look and run good... Thumbs Up!
Thanks bro
Kauf dir wenigstens mal ordentliches Werkzeug.
😂😂😂😂😂😂😂😂
🤔
Restaurada rebarbadora 😉
Getting out of hand.
Full fake
But How ?🤔
Incredible restoration, congratulations friend.
Thank you very much!
fakefakefake!!!!!!!!!!
you have broken the winding body
👍👍👍👍👍👍👍👍👍👍👍👍👍
Ha ha,ha ...Dora the restorer!..FAKE!
The before looks like a terribly croissant
The worst restoration i ever seen
Come check out some real work 👍
@@Austeration Where?
Anda lama sekali gerakan nya dalam merestorasi, dan durasi video anda juga terlalu lama?? Bisakah anda memperbaiki apah yang saya bicarakan
Yeah i understand
@@aahands Ok thank you
These things are accompanied by confusion. 🫢🫣😶
What ???