Over the years, I have returned to this video 3 different times to find the correct way to replace parts on my doors that have marks locks. Thanks for the tutorial!
I broke my key in the cylinder .You taught how to take it off and I really appreciate you and this video !!!The locksmith was going to charge me $85 to do what took me four minutes !!!! Thank you sooooo much sir !! 🥰 Have a great and blessed day !
Take a screw driver and place it in the keyway at an angle and give it a light tap with a hammer. Turn the screwdriver the other direction and give it another tap. Now insert the dummy key and try to twist it out now. If that doesn't work, try spraying lock dry lube around the cylinder if possible. Using the lube can be difficult/impossible with the shroud in place, so you might have to cut it off if it just won't come loose. Once the shroud is removed you can use slip joint pliers to twist it off.
I closed the storm door and locked deadbolt with key. Now when trying to unlock, the key keeps spinning. It's not pulling in the latch. Tried using a different key to spin out cylinder, but it's not spinning. Any suggestions on how to unlock door?
MARKS LOCK ORNAMENT 9215AC/3 UNILOCK LEVER/PLATE MORTISE LOCK FOR SECURITY DOOR / STORM DOOR www.edlocks.com/marks-lock-ornament-9215ac-3-unilock-lever-plate-mortise-lock-for-security-door-storm-door/
Over the years, I have returned to this video 3 different times to find the correct way to replace parts on my doors that have marks locks. Thanks for the tutorial!
I broke my key in the cylinder .You taught how to take it off and I really appreciate you and this video !!!The locksmith was going to charge me $85 to do what took me four minutes !!!! Thank you sooooo much sir !! 🥰 Have a great and blessed day !
Thanks dude. You saved me a lot of money. After watching your videos, I did it my self.
My wife needed to know that the lock cylinder should be turn counter clock- wise to back out the lock... Great video. Now I can fix my lock!
The cylinder lock is screw on to tight when I use a different key to try to unscrew it only move a little I’m scared if I force it the key will break
THANK YOU! I had a broken off key stuck in the outside tumbler. Easy to remove after your video. Problem solved.
Saved the day on a broken security door, thanks!
Great tutorial u make it seem easy
? Can this lick be used on other storm door
Not just wrought iron?
Fantastic video with simple, helpful instructions.
I have two questions the first is can this be used on an entry door and if yes can one of the cylinder be changed to a thumbturn?
Great video, man. It was a big help.
Good shit! I was stumped on how to remove cylinder
What can you do if one of the locks won't unscrew from the lock body?
Take a screw driver and place it in the keyway at an angle and give it a light tap with a hammer. Turn the screwdriver the other direction and give it another tap. Now insert the dummy key and try to twist it out now. If that doesn't work, try spraying lock dry lube around the cylinder if possible. Using the lube can be difficult/impossible with the shroud in place, so you might have to cut it off if it just won't come loose. Once the shroud is removed you can use slip joint pliers to twist it off.
I closed the storm door and locked deadbolt with key. Now when trying to unlock, the key keeps spinning. It's not pulling in the latch. Tried using a different key to spin out cylinder, but it's not spinning. Any suggestions on how to unlock door?
I'm in the same boat. Did you ever figure it out?
Hey. I broke my key in the cylinder. How can i take it out ?
Thank you..very helpful information
My keyway isn't turning
whats the model on that lock
MARKS LOCK ORNAMENT 9215AC/3 UNILOCK LEVER/PLATE MORTISE LOCK FOR SECURITY DOOR / STORM DOOR
www.edlocks.com/marks-lock-ornament-9215ac-3-unilock-lever-plate-mortise-lock-for-security-door-storm-door/
Today you teach me . Thanks
thanks