🔥 GASLESS MIG POLARITY CONNECTOR MODIFICATION
Вставка
- Опубліковано 1 жов 2024
- Wazz up mga kabakal, ngayon araw na ito ipapakita ko lang sa inyo ang ginawa kong Polarity modification sa GASLESS MIG welding Machine ni Powerhouse na MIGTECH200A, gusto mo ba makita kung paano? Halika panoorin natin!
#MIGTECH200 Polarity Modification, Now the machine can weld using DCEN for Flux Core Steel Wire and DCEP for Flux Core Stainless Wire.
FYI: Powerhouse MIGtech200 has a Default DCEN polarity (Direct Current Electrode Negative that uses to weld Steel (Gasless) Flux Core Wire E71T and Stainless (Gasless) Flux Core Wire ER308.
But with the option to use the DCEP polarity to weld Gasless Stainless Similar to Solid Wire with C02, the results of the weld bead is much better, smooth, less spatter, stable current, and crispy arc sounds.
#fyp #fypシ #foryourpage #trending #viral
#Migtech200A
#GaslessMIG
#PolarityUpgrade
#Powerhouse
#DCEP
#DCEN
My Welding Machine and Tools:
Powerhouse MX-MIGTech200A: bit.ly/3mMmeqF
Auto-Darkening Helmet: bit.ly/3pIZFF7
14AK MIG Torch Set: bit.ly/32UjFf3
WAIT!!!! Before you leave just HIT SHARE, LIKE AND THE SUBSCRIBE BUTTON AND THE NOTIFICATION BELL So you will be notified of all new upcoming videos.
Thank you and God Bless!
BUSINESS:
For Product Promotion, Unboxing, Test, and Reviews
Contact Us: 📩 fabandweld21@gmail.com
Be a PATRON: / fabandweld
LIKE US: / fabandweld2021
SUBSCRIBE: bit.ly/306X8dG - Навчання та стиль
sir migtech 300ap gamit ko pwd po gamitin dcep .nagamit ko po dcen 1.5 po kapal ng stainles tubular pero nabukol po nka synergic po gamit ko .
Taasan mo po ang dial ng knob sa wire speed lagay nyo sa 2 or 2.5 kailangan po mataas sya then yung sa voltage lagay nyo sa right side about 1 or 2 oclock position para dapa ang lusaw.
Sa stainless Fluxcored kasi pag mababa amps/voltage mo bukol lang talaga yan.
owede po b isaksak sa extension lang po.thanku
Pwede sir kahit sa normal extension Lamg pero kung mag hapon kayo mag welding gamit kayo extension na may #14 to #12 na wire para Hindi mag unit cable.nyo
Pano ba gawin pag naputol ang wire xa connection ng machine at cable na my noozle.ano ba dpat gawin?
Pwede mo po i cut yung nasa Feeder, Angat mo yung Tension Lock then cut mo yugn Wire, then alisin mo yung Nozzle Cup gamit ka ng Long Nose then pihitin mo yung Contact Tip kasama yung Wire na naputol sa loob.
Kapag naalis mo yung contact tip lalantad yugn Wire then hilahin mo ng long nose. If dumikit yung wire sa Dulo ng Contact tip pwede mo na yan palitan ng bagong contact tip.
Minsan naman kung naputol sa loob mismo ng Liner or MIG Torch Cable yung contact tip lang din ang kailangan mo tanggalin para malantad yung nahagi ng Wire na pwede mo nang hilahin.
Ask ko lng po hnd ba tlga nauubos yun wire sa mig may natitira sa loob po ba tlga kase nun nagpalit aq ng bala hnd sya tumutulak kelangan pa po na hugutin yun natira sa loob po ganun b tlga pag nagpapalit ng bala
Yes po sir natural po sa MIG ang may naiiwan na wire sa loob considered as wastage na po yan.
Pag tanggal po nyan sa dulo mismo nag torch alisin nyo yung contact or kahit hindi na then hilahin nyo ng plier yung wire.
Hello!, boss baka may magawa ka sa Reaim250 machine. baka kaya nyong i modify, paturo nadin kung mag succeed kayo sa modification. Straight polarity lang kasi e. panget ng bagsak sa welding sabog sabog . kahit anung adjustment. nag msg din po ako sa FB page nyo. Ty and more power to you boss.
Sir,ilan po ang amps set up nyan?
200A Max sir.
Sir tanong ko lang po, naka Circuit breaker po ang linya ng koryente ko
Ang tanong ko po magkakaproblema po sko kapg nag saksak ako ng masmataas na Ampere? Ang main breaker ko po 65 ampere, tapos ang oulet ko nasa 30 to 35ampere, pag nag saksak po ba ng inverter welding machine na masmataas ang set up ng ampere sa outlet po magkakaproblema po ba?
Kung ang main breaker ay 60A at circuit breaker ay 30/35A gagamitan mo ng Inverter Welding machine ok lang po yun wala pong problema. Kung mag trip man po ang circuit breaker kapag nag welding na kayo ibih sabihin mababa sya sa kailangan amps ng Machine so kailangan taasan nyo ang circuit breaker nya.
Nasa data plate ng welding machine kung ilang amps ang wrokable sa kanya. Minimum sa mga 200A may 20A pataas depende sa machine.
@@FabandWeld . I'm i ex on TV job 0Qnfz,d Dee Dee.. 11 X3 Dee, no
paano malaman kung dcn
Actually po lahat ng Gasless MIG welding machine tulad nitong kay powerhouse at sa ibang brand na walang open polarity or changeable polarity at naka set na sa DCEN or Straight Polarity.
Good day sir hindi po b madaming spatter yang ganyang gasless glux core salamat
pwede po ba ito kung DC ung migtech ko?
Can reversing polarity be done on a Lotus LT200MGX?
It seems to be possible,But im afraid to switch the polarity because i dont know if it will damage the welder or possibly electrocute the user
Yes it can be done but you cannot use the reverse polarity to weld steel using E71T Filler Wire because this wire is only for Straight Polarity. when modifying your machine make sure to follow the same we did to our machine by placing some thick engineered plastic or flat PPR materials as insulators between the Metal Body and your Cable Wire for Design and Safety Reasons and to avoid electrical short circuits and electrocution.
Reverse polarity can only be used for welding Stainless using E308LT1-1GS DECP or Reverse polarity will give your weld bead much better heat input than Straight Polarity or DCEN this modification is optional based on your skills and level of knowledge using MIG welding Machine.
@@FabandWeld So my Lotus LT200MGX is not designed to be changed polarity...it can be changed but modifications must be made?
Maybe a better idea is to purchase a welder where i can change the polarity but not have to modify it
@@FabandWeld i was wanting cleaner welds with fluxcore wire machine by changing polarity..i think maybe purchasing a welding machine that uses Argon Gas is better thank you for your guidance and safety precautions!
@@getoffenit7827 buddy... flux cored wire welding is much dirtiest than the Stick welding process. much smoky, lots of spatter BBs all over the weld area especially on a flat position ohh boy your surrounding clean surface will suffer with lots of spatter that will penetrate to the surface which you don't want to happen.
Flux-cored welding is better for rusty metal or not yet polished materials so you can follow with grinding buffing and polishing after you weld it.
if you intend to fabricate some good stuff better use MIG with Gas Welding machine so you can have the option to load it with Solid MIG Wire with Gas and Flux Core wire MIG Gasless (FCAW).
Mig with gas is much cleaner than Flux Core and Stick Welding less and almost no spatter left after your weld passes and if you well skills welder you dont have to grind and polish your weld bead profile if you stacking is really good.
@@FabandWeld im okay with flux core gasless welding for general use ..i will use that for welding on galvanized steel or flat bar angle bar
But for nice project that i want i will use gas mig.
Thank you for your insight.
Sir ask lng kung anu ang mas mausok flux cord or stick welding
STICK weld ang mas mausok kung i compare natin sa mga ligt duty MMA vs MIG GASLESS pero kapag gamit mo industrial welding machine na MIG na ang wire is nasa 1.6mm halos parehas nalang din naman kapal ng usok nila dahil pareho silang may FLUX.
FYI pinag kaiba lang nga Stick sa Flux core wire:
STICK: nasa labas ang FLUX
FCAW: nasa loob ng wire ang FLUX kaya tinawag syang FLUX CORED WIRE.
@@FabandWeld pero sir kung ikaw anu mas maganda flux cored or stick welding,sabihin na natin na magastos si flux cored.alin ka sa dalawa yung opinion mo.
@@jherricoplomos4884 STICK weld parin bakit kamo?
Ang Stick welding machine mas madaling gamitin basta matutunan mo sya, mas mura ang machine at consumables nya, pwede pang Steel, Stainless, Aluminum, pwede ko habaan ang cable ng ground at electrode up to 15 meters, mas madaling i setup.
Si MIG machine limited ang length ng filler tube/cable. Mas mahal ang unit at filler wire. Kung gasless limited lang sa Steel at aluminum. Limited dib ang kapal ng metal na kaya nyang i weld lalo na kapag non industrial grade ang machine.
Si MIG more on workshop use si Stick vise versa indoor or outdoor pang harabas ika nga..
@@FabandWeld sir last question performance weld machine alin ka.
Pwerhouse
Lotus
Kawasaki
Ingco
Sir mag kano po ung mig 300amp,gassless
Pa check nalang po dito sir: s.lazada.com.ph/s.659IU
Para ang dali nyo lng gamitin sir idol ang ganda pi talaga godbless po plage sir idol
sir san makakabili ng mig gasless + stick welding????
Dito po kayo mag check sir sa lazada store mismo ni Powerhouse:s.lazada.com.ph/s.54ws7
Sir paano po
kung aluminum ang weweldingin mo ganun pa po ba ang gagamitin mo
Unfortunately sir wala kasing Gasless MIG wire na Aluminum eh. All aluminum wire for MIG is solid wire that needs Shielding Gas which is 100% Argon and DCEP Polarity.
Sir magandang hapon isa po akng baguhan. Gusto ko sana bumili ng gas less power house at mag kano po bo yan???
Please check nalang po dito sir: shorturl.at/yoo50
Boss Ang PowerHouse ba ay gawang China?
Yes lahat naman po halos ng Welding machine na nakikita nyo tulad ng Powerhouse, Ingco, Kyk, Daiden mga gawang china lahat yan.
Kagandahan lang kay powerhouse nasa pinas mismo company nya.. manufacturer lang ang nasa china.
Sir Yung bang design Ng MigTech 300 ay di na klangan yan ganyang modification dhel npansin ko mron na syang extra wire torch to connect for + or - , Tama ba ko?
Yes po hindi na nya kailangan kasi sa dating MIGTECH200 wala syang Option ng DCEP Naka Default na yun machine sa DCEN so kung nakita nyo yung isang Video natin na minodified ko yung MIGTECH200 yun yung naging idea namin ni Powerhouse na lagyan ng Optional Polarity DCEP/DCEN si MIGTECH kaya yung Bagong Migtech250 at 300A Optional na sya para magamit mo sa MIG Gas at Gasless. meron din syang SMAW at Manual TIG Option.
Ung 250 at 300 amp nyan sir may 2in 1 na. Pwde na sa stick at may option na sa polarity.
Yes updated na po yun bale 3 in 1 na MIG GASLESS/STICK/SCRATCH TIG
Paano omorder sir at mag po yan ???
Please check it here po: shorturl.at/yoo50
Sir ginawa ko po ito sa lotus mig welding machine ko.. di po kaya masisra?
Hindi po. Sadyang ginawa lang yung machine mo default sa DCEN polarity for FLUX CORED WELDING pero pwede syang optional na may 2 polarity DCEN at DCEP tulad ng normal na MIG MACHINE. dati kasi available lang n filler is for steel sa GASLESS MIG for STEEL so dahil may availavle ng GASLESS na STAINLESS and after testing the filler ceom different brand na mas ok sya gamitin sa DCEP kesa sa DCEN dahil sa DCEP mas solid ang penetration ng weld na STAINLESS MIG FILLER WIRE NA GASLESS/FLUX CORE.
Sr pyd ba synag gamitin sa stainless sa pag welding
Pwede po meron po tayong Flux Core wire na Gasless for Stainless check nyo po dito: bit.ly/3RAw90j Arcsmith Brand then Meron din si Powerhouse: bit.ly/3AMezA6
Good day po sir ask ko lang po puwede po ba ung 1 kilo fluxcord sa migtech welding machine natin sir? Pls help salmat po
Yes sir pang 1 kilo lang po talaga yan or 0.45kg/ half kilo pero same size lang spool nyan.
Sir parehas tau ng welding machine pwede ko b palitan ng magnet n clamp yung akin??
Pwede rin sir pero try mo kung hindi magbago ang arc sa welding mo pero kapag napansin mong pumapaling left and right or hindj stable ang arc wag mo na ikabit kasi minsan na apektuhan nyan ang magnetic field ng welding polarity mo kaya mag kaka issue yan during the welding process.
sir yung sa nihonweld na wire request subukan sana dalawa process DCEN at DCEP.
Yung sa NIHONWELD na FLUX Core Wire for STEEL Dual Shield sya base sa Nihonweld recommended nya may GAS/C02 and pang heavy duty po sya boss di sya pwede dito sa pang DIY MIG Machine natin dun sya pwede sa isang Unit yung EVOPRO Series kasi malaki ang SPOOL WHEEL nun 5kgs isang SPOOL. malaki din ang wire nya 1.2/16mm and as per NIHONWELD pwede sya AC/DC DCEP/DCEN kasi nga may dual shield sya pag naka DCEP mabawasan spatter nya dahil sa additonal shielding gas. Yung sa STAINLESS Naman wala silang maliit na wire puro pang heavy duty wala syang available para dito kay MIGTECH and that can run only with AC/DC DCEP and pwede sya with or without additional shielding C02.
bro pwede ba magamit si powerhouse mini 200 kung ang bala is stainless?
Pwede sir meron na po tayo available na wire filler dyan. s.lazada.com.ph/s.ewaHo
Sana Sir ma review nyo yung sparx 300 mma
This Coming February po will upload tutorials for that. konting hintay lang po!
Good day idol, madami na ako nagawa sa migtech ko, problema ko lng sumubok ako ng stainless na wire, masyado bukol ang bead, powerhouse din po ung brand na binili ko, 0.9mm po, bakit masyado po bukol ang bead nya?
Anong code ng wire for stainless gamit nyo sir, yan ba yun galing din kay powerhouse na PH-E308LT1-1GS kasi kung hindi yan ang code baka nakuha nyo yung wire na pang CO2 check nyo mabuti. kung yung PH-E308LT1-1GS Gasless Stainless Mig Wire yun para yun kay MIGTECH kailangan nyo lang taasan halos sagad sa 3.5 ro 4mm Thickness yung Dial Knob ng machine nyo. stainless nyan need more heat pero hindi dapat babad kasi malambot lusawin ang stainless filler masyado yang malabnaw or fluid. kailangan mo taasan amps mo kasi need mo mas mainit ang base metal para kumapit ang dumapa ang filler metal mo. try to adjust the setting of the dial till makuha mo timpla.
@@FabandWeld salamat po sa pagsagot sa query ko sir, powerhouse e308LTI-GS 0.9mm po ung mig wire na nabili ko, subukan ko po isagad ung dial, sinubok kn po xa na sa tantya ko nasa 3.5 ung dial pero bukol pa dn, pwd ko kya xa ilipat ang polarity?
Boss paano magamit yung tig sa powerhouse MX migtech300
Pwede kaya sya sa mas larger sa 0.9 mm na wire? kung halimbawa palitan ng mas malaking welding tip?
1.0mm sir pwede po yung kasama naman nyan na Contact tip 0.9/1.0mm
hello po sir taga Biñan,Laguna po ako at balak ko po bumili ng Mig welding nyo pero bk pwede paki Modify nyo na din ang Polarity nya.
Hindi po yun sir pwede i modify sa STORE after mo po mabili saka nyo lang pwede ma modify. within warranty Period 6 Months dimo po pwede galawin dahil mawawala warranty nya. pero kung gusto nyo naman pwede pero kapag nagka problema within 6 months VOID ang Warranty nun? pwede mo po dalhin sa bahay ko kung gusto nyo ipa modify pero sa STORE wala po gagawa nun.
@@FabandWeld san po kayo nakatira sir?
@@FabandWeld nadeliver na din po Powerhouse Flux cored welding achine ko last tuesday Feb.15
Sir saan pwede mag pa repair o ipa chek tung pixpro ko sir sa parts po sna na NCR? TNx
Sir,nadeliver yung powerhouse mx migweld 200tech kahapon(Feb.6),try ko today,1 beses lang nag spark tapos ayaw na,tried several settings ayaw pa rin,ang malas ko naman,plano ko sana gayahin yang modification ginawa nyo sir.
Message mo po ako sa Facebook page facebook.com/fabandweld2021/ para ma tignan ko kung ano nangyari sa machine mo
@@FabandWeld ok lang po sir, nag request na lang ako ng return and refund ,sa Powerhouse outlet sa San Nicolas,Binondo na lang mismo ako buy para ma testing on the spot kung gumagana,mahirap pala sa online pag ganyan equipment. Salamat po sa mga informative tutorial videos nyo po,dami ako natutunan,d.i.y./hobbyist lang po ako,good luck po at God bless🙏
@@jopht1640 ok yun sir mas mabuti talaga pag walkin buying para ma test mo ang machine assist ka naman nila dun sa store ask ka din freebies na tshirt 😉
Tnong lang po ako sir dun sa migtech 300 po pag mg weld ako ng stainless pano gagawin ko po baguhan po ako firstime ko po
Sir para sayo alin mas maganda, powerhouse or lotus flux cored welder?
Para sakin sir? Honestly,, Powehouse... WHY? Kasi kung pag babasihan sa LOAD Same lang sila 1KG ang allowed na SPOOL WIRE, Size? Mas Compact si Powerhouse si Lotus Malaki kaha pero same power ni Powerhouse Sa Parameters ok si Lotus kasi kung marunong sa MIG machine ang gagamit mas ok ang Hiwalay ang AMPERAGE at WIRE SPEED, Pero yung mga ganitong machine kasi na mostly for DIYers, Hobbyists or Small Fabrication Welding Works lang ok parin si Powerhouse kasi mas User Friendly yung Parameters adjutsment nya lalo na baguhan sa MIG ang gagamit. 1 Dial knob andun na lahat AMPS, WIRESPEED. si Lotus ok din naman kugn like mo Malaki ang kaha pero maliit lang din maikakarga mong spool and kung like mo compact mas ok si Powerhouse. Saka abangan nyo may ilalabas na bago si Powerhouse na Upgrade Series ng MX-MIGTECH yung upgrade halos sinlaki lang din nitong MIGTECH200 pero yung bago meron ng Option ng Polarity. Negative and Positive Connector and pwede rin sa SMAW, pati parameters separate na ang WIRE SPEED at AMPERAGE. Abangan nyo maybe this February ilabas na yun sa Market!
@@FabandWeld cge sir abangan ko, tnx
Parang maganda yung gagawin mo sir soon
Sir sna magawa nyo ung next step with gas, slamat
Ang ganda ng Idea mo boss.. tanung ko lang po sa Mig welding machine meron ba yan Solenoid velve sa pag control ng gas?
Kahit wala na nun pwede naman direct sa tank nalang on and off yung gas valve or lagyan sa likod ng machine. Pero kung may makita tayo sa loob ng pcb na pwede kunan ng power source ng solenoid pwede rin kabitan may space naman pwede i setup yung mechanism.
@@FabandWeld pwede yan boss. I think pwede kau kukuha ng supply sa motor at lagay ito sa relay at lagyan ito ng bagung power supply for solenoid…
Pwede siguro pag pareho ang power supply nila diko na check ilang V ang motor nung MIG eh kung DC24V supply nya pwede yung solenoid ng MIG/TIG same components kaya lang need pa natin check yung main supply components nya from PCB kung ilan load kaya nya maliban sa feeder motor na unang naka karga.
sir idol bakit di mo na lang ginamitan ng reverse polarity switch para di mo na kinakalas kung babaguguhin mo yung polarity
This is the common setup po kasi kahit sa mga high end brand like miller and esab or lincoln sa ibang model nasa loob ng compartment yung ganyang setup ng polarity option sa ibang unit naman nasa harap may baka lawit ng cable na may quick connector para isasalpak mo nalang kapag DCEP Reverse Polarity or DCEN Straight Polarity ang gagamitin mong current output.
How much gasless tigweld
Good sya sir ginawa ko sa mig ko
Kapag gumamit ka ng Flux Core na Stainless Wire lagay mo sa DCEP yung Power ng Torch sa Positive mas maganda ang hinang based on my experience sa Flux Core na stainless wire.
Yes sinundan ko kasi naubos na reg wire ko ang stainless nlng natira ginamiko sa bakal less splater din
@@gabrielreygalvez6553 good job lods congrats!🍻
Salamat sa mga tip sir highly recomended dami ko natutunan sir 💪💪💪👍👍👍
@@gabrielreygalvez6553 maraming salamat sa tiwala at pag subaybay lods.... mabuhay po kayo!
Pwede sir sa iyo mag order nyan at magkano po
Check nyo po dito sir pwede na din kayo dyan mag order online deretso mismo sa Powerhouse: s.lazada.com.ph/s.VCejm
pwede po ba stainless flux core dito sa migtech
Pwede po, gamitin nyong filler wire is PH-E308LT1-1GS meron pp nyan si Powerhouse mismo or Arcsmith brand.
salamat po @Fab&Weld. may follow up question po ako. sa tuwing magpapalit po ba ako ng filler wire na may ibang sukat, kailangan plitan ko po yung tip?
As you mentioned CO2 gas, ano ba talaga ginagamit CO2 or Argon gas?
Its either pure CO2 or ARGON can be used for MIG welding as shielding gas or mixed 75/25 75% argon 25% Co2 or 75% Argon and 25% Helium these are the gases you can used for MIG/MAG process .
FCAW or Fluxcored Arc welding also using the same gases as secondary or we called it Dual Shielding Process which your FCAW has already its own FLUX Gases Shielding but with CO2 or ARGON the weld will have more clean weld and more deep penetration.
ok copy. thanks for quick reply. i bought recently migtech 300, but i have not tested yet. this is my first migweld machine, and no experience. for personal use only, para pag uwi this 12nov, ma test ko ang equipment. onboard ako now as chief engineer, and just reviewing sa mga vlogs mo. thank you for information & training on this unit.
best regards n god bless.
Ano po official store online ni powerhouse sa lazada o shoppee?
Can you recommend a 'Power House' MIG Welder? I want to use a mix of 70% Argon 30% Helium gas..i like my fluxcore..but im more expirienced with a regular mig gas welder
How much po yan kbakal
Sir mag ask lang po ano ang problima pag minsan hindi eekot ang roller nya