I'd like to seem some of the "shoulder bag" cases. These are all well and good but they do not handle accessories like USB-C hubs or third-party chargers, cables etc. Let's see how some of those bags fare with Ally.
I use the latest version of the Satisfye Slim Case for my ROG Ally. Just rotate it so the bottom of the console faces the top handle. The triggers will fall into the holes for the grip. Also the added bonus of being able to charge the Ally while in the case.
@@lloyddullavin2973 No issues with the sticks getting damaged in that case? i sold my Switch OLED once i got the Ally as i have a Switch Lite, but i do have that case i could re-purpose it for the Ally
I think you missed the mark on the generic amazon case at 4:59. there is a Velcro strap you can attach to prevent it from sliding around. i put a microfiber cloth between that and the screen, it's brilliant
Does it push in the analog sticks sometimes or the back buttons? I use my spare SD case for now but it presses the backbuttons when my backpack moves a bit...
No it doesn’t push the buttons, there’s a lot of room in the case. Plus it’s nice and secure when you wrap the Velcro sleeve that it has inside so it don’t move either. Has a lot of room to also put chargers and even a Nintendo switch if you want. Lol
8:33 - Honestly mate, I can't fathom why you'd say that it's not a bad case if you can get over the protection aspect. This is a "travel case" - that means the entire point of its existence is to protect it while travelling.
I've been using the Tomtoc case for switch splitpad compact and I think it fits perfectly. Doesn't push the triggers down on mine, but I do keep it off when its in the case anyways. Great fit IMO. Way better than an oversized steam deck case where it's going to slide around.
Try the DEVASO carrying case for the steam deck/ ninetendo swtich. I just got it. Fits my rog ally, charger and cable and a dock. And more if you want. Has a v shaped structure inside that protects the thumbsticks.
tomtoc Arccos Series for the steam deck. this is more so a bag rather than just a case, but has two carry handles. fits all the accessories you would need plus a xbox controller while still being able to carry by hand rather easily
I picked up the Aenlossi for my Ally and I completely agree that it is a bit bland. Personally I found a iron-on patch from amazon (Etsy is probably also a great option) and popped that on the front. I opted for a Wings Of Freedom patch from Attack on Titan but I thought the old school PlayStation 1 logo would have looked really nice as well. Was super easy to install, just make sure you have something underneath the top flap to support it while you are ironing on the patch and also possibly iron through something like a towel just to help with heat distribution.
Hi friend! I have verified that the JSAUX (and it's clone) cases will work and have a little velcro "strap" that prevents the sliding (of left/right). I've been using that case for windows handhelds for awhile but it now holds the Ally!
@@CTAtechdesk So the case I mentioned clears both sticks, although if you press hard enough from the outside of the case, it will press down on the left joystick. Hope this helps.
The stock asus case is an absolute POS. I bought it and found everytime I zip it closed the zipper scratched the triggers. It offers no protection except accidental scratch on the screen. The Iofeiwak is not perfect but it's better than the generic amazon case you showed as I bought both and stuck with the Iofeiwak
Great video. The official Asus Ally case is a soft case. No protection along the edges and you can easily click on the joysticks and the rear macro buttons when carrying it around. For $39US, it's absolutely a joke.
My two gripes ( i just received the newer, black and clear version ) 1: the top middle doesnt really secure well. I find myself re-securing it throughout my sessions. 2: My brand new 180-degree usbc angle plug (so it points down) no longer fits. Not the cases fault but something to keep in mind if your angle adapter has a tight formfactor.
Quick question on the Aenllosi case. Do you think you can manage to fit an extremely small keyboard like Microsoft designers compact keyboard 284.07 x 110.77 x 9.05 mm on top of the ally? I'm tempted but it's $42 USD and won't ship for almost a month.
I don't know about anybody else but honestly I wish that they would make a backpack specifically meant for the ally or maybe even the steam deck where it held the ally in a hard case on the inside that was lockable and you know have cool little places to put your charger a wireless mouse small wireless keyboard maybe a small 7 to 10 in portable gaming screen and a couple of high watt battery pack chargers.. something like that you know. I don't know why anybody doesn't do it them things would sell like hotcakes for the steam deck and for the ally. The best thing I've been able to find to use for my ally was a tactical backpack and it was like 120 bucks but it works really well and I can put all that stuff in there and it has the bonus effect of that people might be thinking I'm carrying a gun in there instead of over $1,000 of electronics.. I live in Texas so we have pretty awesome gun laws here in case anybody was wondering
Yup. Better than nothing though. Waiting on d brand, this one is my 3rd from Amazon, all say “fits ally” and of course, doesn’t by a few mm. Last 2 only covered the screen and not bezel. 🤢
It’s to answer the questions I get about fitting in my other videos and all you need to do is check amazon to see the amount that claim this but in truth doesn’t fit.
Both the "Aenlossi" and official one are the worst ones you could possible get in my opinion. You cannot even fit the charger in there together with the device. To me this is the definition of a pointless product.
Try being in the uk 😂 Can only just for one of our charging bricks in a suitcase. The official case is really designed for protection and nothing more and does the job when packing
11 cases tested. Please let me know if you want me to do a deeper dive in any of the cases.
I'd like to seem some of the "shoulder bag" cases. These are all well and good but they do not handle accessories like USB-C hubs or third-party chargers, cables etc. Let's see how some of those bags fare with Ally.
I use the latest version of the Satisfye Slim Case for my ROG Ally. Just rotate it so the bottom of the console faces the top handle. The triggers will fall into the holes for the grip. Also the added bonus of being able to charge the Ally while in the case.
@@lloyddullavin2973 No issues with the sticks getting damaged in that case? i sold my Switch OLED once i got the Ally as i have a Switch Lite, but i do have that case i could re-purpose it for the Ally
butterfox for the rog ally is amazing the butterfox has a deep case so you can store your rog ally and your charger or powering along with it
Check out the spigen case meant for the steam deck. It fits ROG ally beautifully
I second this idea.
I bought one and im in love with it
No, it is too big, the ally slides around in it
@@Stormcloud10 No it doesn't you can tighten the velcro
@@astronomicalgainz ^^^^^ exactly
I think you missed the mark on the generic amazon case at 4:59. there is a Velcro strap you can attach to prevent it from sliding around. i put a microfiber cloth between that and the screen, it's brilliant
Nice one 👍🏻 But too close to the thumbsticks for me. Maybe a cloth down the side just in case.
Try the Spigen case made for steam deck. That’s the best one so far.
Yep it is i got it i love being able to stash the power supply and other accesories in the same case!
Does it push in the analog sticks sometimes or the back buttons? I use my spare SD case for now but it presses the backbuttons when my backpack moves a bit...
No it doesn’t push the buttons, there’s a lot of room in the case. Plus it’s nice and secure when you wrap the Velcro sleeve that it has inside so it don’t move either. Has a lot of room to also put chargers and even a Nintendo switch if you want. Lol
@@YouCanCallMeMichYes, it does and the case is too big at all, the ally slides in it.
@@Stormcloud10with the Velcro strap on it does not slide at all. This is what I use too
8:33 - Honestly mate, I can't fathom why you'd say that it's not a bad case if you can get over the protection aspect. This is a "travel case" - that means the entire point of its existence is to protect it while travelling.
I've been using the Tomtoc case for switch splitpad compact and I think it fits perfectly. Doesn't push the triggers down on mine, but I do keep it off when its in the case anyways. Great fit IMO. Way better than an oversized steam deck case where it's going to slide around.
That’s odd. Mines a very tight fit and can’t use it, maybe check when it’s in as I wouldn’t want pressure on the triggers even if its off.
@@CTAtechdeskwhat's the long term damage of the triggers being squished down?
I use an Aldi bag and it also fits groceries in woth the Ally
lol
Ah yes, the video iv been looking for especially it came out a few hours a go
Try the DEVASO carrying case for the steam deck/ ninetendo swtich. I just got it. Fits my rog ally, charger and cable and a dock. And more if you want. Has a v shaped structure inside that protects the thumbsticks.
Thank you so much, I’ve been looking for cases non stop and your video helped a lot. I clicked your link and purchased the black version
What is the thing on the desk? in the top left?
Can you use the Rog ally official travel case? If your ally has a silicone protector?
Does not scratch the zipper on the Ally ? Looks like it 🫣
I need one that fits with the killswitch fro. D brand attached
Where did you buy that cool clock from ?
tomtoc Arccos Series for the steam deck. this is more so a bag rather than just a case, but has two carry handles. fits all the accessories you would need plus a xbox controller while still being able to carry by hand rather easily
Video on that going live later today. It’s an awesome bag isn’t it 👍🏻
I picked up the Aenlossi for my Ally and I completely agree that it is a bit bland. Personally I found a iron-on patch from amazon (Etsy is probably also a great option) and popped that on the front. I opted for a Wings Of Freedom patch from Attack on Titan but I thought the old school PlayStation 1 logo would have looked really nice as well. Was super easy to install, just make sure you have something underneath the top flap to support it while you are ironing on the patch and also possibly iron through something like a towel just to help with heat distribution.
What a brilliant idea 👍🏻
Hi friend! I have verified that the JSAUX (and it's clone) cases will work and have a little velcro "strap" that prevents the sliding (of left/right). I've been using that case for windows handhelds for awhile but it now holds the Ally!
It’s the pushing of the joysticks with the centre flap that’s the major issue for me. Only the ones I tested do this and can’t vouch for others.
@@CTAtechdesk So the case I mentioned clears both sticks, although if you press hard enough from the outside of the case, it will press down on the left joystick. Hope this helps.
The stock asus case is an absolute POS. I bought it and found everytime I zip it closed the zipper scratched the triggers. It offers no protection except accidental scratch on the screen.
The Iofeiwak is not perfect but it's better than the generic amazon case you showed as I bought both and stuck with the Iofeiwak
Waterfield waxed canvas and chocolate leather and the Spigen case. Both are pretty rad.
Most of the "no" cases have been updated already if anyone is wondering.
Tomtoc wins it….so far
Anyone find a case that fits both the ally and its power brick? Great video, nice work!
The Spigen case for the Steamdeck does!
@@00ricanBut be prepared it's huge! Almost to much storage space
What is that clock on your desk that is what im most interested in?
Great video. The official Asus Ally case is a soft case. No protection along the edges and you can easily click on the joysticks and the rear macro buttons when carrying it around. For $39US, it's absolutely a joke.
Yeah they're pretty much making money off from accessories, man my 20$CAD steam deck shoulder bag may have the same quality with that.
I got the official one and a Waterfield one, love the Waterfield.
My two gripes ( i just received the newer, black and clear version
)
1: the top middle doesnt really secure well. I find myself re-securing it throughout my sessions.
2: My brand new 180-degree usbc angle plug (so it points down) no longer fits. Not the cases fault but something to keep in mind if your angle adapter has a tight formfactor.
Where you get that clock from
I want to know too! It looks cool
@@smoke08861 yeah it’s nice AF
It’s not out yet. I’ve got a video on it coming soon. Divoom Times Gate 👍🏻
I picked up a tomtoc steam deck carry bag. Fits great.
The arccos? I’ve made a video on it, If it’s that one. It’s the perfect bag for the Ally
Quick question on the Aenllosi case. Do you think you can manage to fit an extremely small keyboard like Microsoft designers compact keyboard 284.07 x 110.77 x 9.05 mm on top of the ally? I'm tempted but it's $42 USD and won't ship for almost a month.
Hi, that would fit in the Aenlossi, but I cant be sure and dont have one to test, so dont want to make false promises.
Where'd you get that clock?
i have the same exact question it looks fire
It’s from Divoom, it isn’t out yet and I be got a video on it soon.
Love the brown mat! Cant read the brand.. mind telling me?
Of course. It’s an Amazon special. “Knodel”
Kindly put the link where i can buy those analogue covers
Done 👍🏻
A custom case with a battery pack is very welcome
I don't know about anybody else but honestly I wish that they would make a backpack specifically meant for the ally or maybe even the steam deck where it held the ally in a hard case on the inside that was lockable and you know have cool little places to put your charger a wireless mouse small wireless keyboard maybe a small 7 to 10 in portable gaming screen and a couple of high watt battery pack chargers.. something like that you know. I don't know why anybody doesn't do it them things would sell like hotcakes for the steam deck and for the ally. The best thing I've been able to find to use for my ally was a tactical backpack and it was like 120 bucks but it works really well and I can put all that stuff in there and it has the bonus effect of that people might be thinking I'm carrying a gun in there instead of over $1,000 of electronics.. I live in Texas so we have pretty awesome gun laws here in case anybody was wondering
great video!
Doesn't that official case block the fan intakes when used as a stand as shown?
Yes it does!
Not if you angle it correctly.
What is the gadget in the upper left corner of the scree? looks cool
It’s an LCD display called Divoom times gate
Where you got these cool looking thumbstick caps from?
Amazon. Glow in the dark too 😂
@@CTAtechdesk do you have the link for these?
Aenllosi Hard Carrying Case is 42 usd in the us bro?????
Wow. Far too much.
What is that device with the 4 screens on the left of the Ally?
Not out yet. It’s a Divoom Times Gate and I’ve got a video on it soon. 👍🏻
You think its pricy for a 20 pounds official case? In Noway they cost 60 pounds :O :(
Jeez. Thats too much
I purchased the Aenllosi in black for $39.99 will arrive in 3 days will update after I receive it.
At 30, it's too much.
Edit: as of today, Aenllosi at 18€. Added to cart.
Which thumbstick covers are those?
Links in description 👍🏻
Great video, thank you! But your screen protector gave me anxiety the whole time Lol...
Yup. Better than nothing though. Waiting on d brand, this one is my 3rd from Amazon, all say “fits ally” and of course, doesn’t by a few mm. Last 2 only covered the screen and not bezel. 🤢
@@CTAtechdesk yah only DBrand and AmFilm seem to cover the screen. Just got my DBrand order for the Ally, you'll be very happy soon!
If it's on sale, I'd highly recommend the Divoom Sling Bag V. It fits everything I need for my Ally 🤠
I just use my wooting 60 he case
Yes? No? Maybe? I don't know. Can you repeat the question?
Maybe
My Satisfye Slim Case fits my Ally fine. It's for the OLED Satisfye grip.
the ROG one should have been "fits, but...."
What a shock, it doesn't fit in cases not ment for it, what no 😂😂😂
It’s to answer the questions I get about fitting in my other videos and all you need to do is check amazon to see the amount that claim this but in truth doesn’t fit.
Do not buy the official case it’s terrible broke my first ally cause of the lack of padding small drop of less than 2 feet cracked shell and all.
Yeah, as I say, its not the best protection, certainly not if you drop it
@@CTAtechdesk correct but I’d say the whole point in a case is to protect the device in the event of an accident.
Both the "Aenlossi" and official one are the worst ones you could possible get in my opinion. You cannot even fit the charger in there together with the device. To me this is the definition of a pointless product.
Try being in the uk 😂 Can only just for one of our charging bricks in a suitcase.
The official case is really designed for protection and nothing more and does the job when packing
Thanks for the video. There's another case that you can put the charger and the cable in it too. ASIN : B0C9Q1Z47Z