Car Audio Cable Splitter, 1 Female to 2 Male

Car Audio Cable 1 Male To 2 Female / 1 Female RCA 2 Male Adapter Cable Wire Splitter Stereo Audio Signal Connector from AliExpress
JEC 3245 Car Audio Amplifier
• JEC 3245 Car Audio Amp...
Subscribe
/ dominicgichane
Check out my website
www.techsawa.com/
Follow me on twitter
/ techsawa
Like on Facebook
/ techsawa
Lets pin it
/ dkinungi

[@grantklubert1887]

They also make things called distribution blocks where you plug the red and white in and it has 8 holes to plug in 4 RCA’s

[@KaililKendrickPremium]

Dawg those are $80usd minimum. Y splitters are good enough for me. Barely can tell the difference

[@grantklubert1887]

@@KaililKendrickPremium some are expensive. I found one on eBay for like $40. Y splitters work until you need 3-4 sets of RCAs

[@drodman34]

I just got the same cables from bestbuy $6.

[@steelcitycaprice.899]

Effective enough for me.👍🏾😎

[@DominicGichane]

Great

[@chriscoolandcalm4364]

Keep it up G

[@DominicGichane]

Thanks

[@alexanderpapii4866]

And where does the other end of the wire plug into audio left and right? Or aux left and right

[@illyasvielgoddenflash2340]

logically left and right, but no front and rear

[@chriscoolandcalm4364]

Great job 👍

[@DominicGichane]

Thanks

[@illyasvielgoddenflash2340]

good but you can adjust balance left and right, but fader front and rear doesn't work but this is better sound quality from headunits than you use high to low rca adapter. yeah, this is for headunit that only have 2 rca out.

[@DominicGichane]

Yes, you are right

[@bigsmokenochoke4203]

Yea my pioneer avh only has 2 rca out. im using one input for my subwoofers and i want to use the other one to run a 4 channel amp but don’t know how. So I need to buy 2 of these and 4 sets of rca ?

[@illyasvielgoddenflash2340]

@@bigsmokenochoke4203 Google " high to low converter RCA ".

[@williamensign1408]

Thanks

[@chestermarwein2947]

I thought you should plug horizontally

[@williamkennard4663]

Now when we do this, can we run door speakers and a subwoofer still since its a 4 channel? Doors on one&twochannel and the subwoofer on 3&4?

[@DominicGichane]

Yes it's possible

[@Jose-ew6hj]

So if running a lc2i for my highs it only has one rca output for highs but my amp has 4 channels I just get a splitter and I have signal to all 4 channels ?

[@DominicGichane]

Yes you can do that but you'll only get a mono signal to alln4 speakers

[@SnowBoy-gf7id]

what is the use of doing this..just i want know..because i dont know thats why..can anyone explain..please

[@WireHarnessAssembly]

Custom Cable Assembly Service

[@smartchoice11229]

Dude you pluged the channels wront. Up down not side to side

[@madardjsoundrurkakalan7470]

wire price?

[@cocomaster3755]

But then you're using the same front or rear door signal to give all your doors power from the same channel is not sound how it would if they were separated then you can have more play in your tuning.

[@htownsfinest87]

So what is your solution

[@cocomaster3755]

@@htownsfinest87 a head unit with three or more sets of outputs, or a line out converter with three sets of outputs at least. One set for bass RCAs two sets for highs/mids.

[@Shurentz]

If you have extra 4 channel amp lying around and you don't want to buy 2 channel amp then, you can use this to get more power to front speakers by bridging the amps channels and only use one rca on the head unit.

[@jovankimmisa1380]

How much Pres sir

[@djdeezmusic1997]

Kitane ka our kaha milega

[@henryithalii3346]

hi nataka hizo cables

[@madhatterstunts]

Your also losing voltage.

[@nigga7387]

been doing this for years it’s nothing new or cool

[@DominicGichane]

nice

[@VeOur]

Yo you so cool bro. I did that the first time and it helped me

[@lloydyboy101]

Lol

[@DominicGichane]

lol

[@michaeljones6767]

I mean why not jus buy the real plugs man y'all wild

[@DominicGichane]

Post a link

[@emilyhouse9642]

incorrect instructions to those car audio illiterate