⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
Excellent video. I believe you have to buy a tool called a straight edge. It will show you where the surface of the engine block or cylinder head bottom are uneven. Then you can replace them accordingly.
Same. I just bought a Jeep, and with maybe 200 miles put on it since leaving the lot and it was bone dry and running hot as fuck. No leaks, no residue, only a bit of burnt syrup smell. It’s only been a week and a half; it’s going back.
On any engine just start the engine and open the engine oil cap you will see air coming out (only if you have not put in some kind of head gasket sealer
do you have all these things go wrong with the car. im losing fluid and have a smoke smell. i thought it was oil. but im not losing any oil and i have no water in the oil. i have red antifreeze not green. im thinking that red may have a different smell then green. no power loss and no overheating. cant find any dips or any fluid under the car. also the smoke smell does it mostly when i going up and down hill not on a straight road? and i lose heat but now its bad? i have subscribe to you
Enjoy the videos. I would like to see your opinion on the code p0316 on the ford 1.5 and 2.0 eco boost. We recently purchased a 2017 Ford Edge with a 2.0 that had a crack in cylinder 2 allowing coolant intrusion. Ford has issued no recalls but has issued multiple superseded tsb’s since 2010. Have you heard of this issue.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
God bless you bro
Nice 🔥 ❤thank you very explanatory
Excellent video. I believe you have to buy a tool called a straight edge. It will show you where the surface of the engine block or cylinder head bottom are uneven. Then you can replace them accordingly.
Everything you named off you were right I do have a crack cylinder head. Thank you so much.
Can epoxy steel use in small crack cylinder head
Thank you so much
Thank you
What if I have two cylinders misfiring but no overheating and no leaking coolant?
How can reuse head gascat
Please make more videos y'all are good
Is steel seal any good?????
Im losing coolant there are no leaks and no overheating. Don't know if it's a blown headgasket or a cracked head?
Same. I just bought a Jeep, and with maybe 200 miles put on it since leaving the lot and it was bone dry and running hot as fuck. No leaks, no residue, only a bit of burnt syrup smell. It’s only been a week and a half; it’s going back.
@@Just_Call_Me_Timdid you ever figure this out? I’m having this problem with a ford fusion
Oh it's my problem right now this fuckin shit is also do like that 😅😅😅
Ok Thank you for the information, so now how do I reply the cylinder head?
thanks, quick fast video
Just replaced my head gasket and I'm still getting coolant in spark plug wells 3-4 and misfires. 😭
Looks like I got a bad head.
Would a bad head Caset .how to tell .I have a 09 impala Chevy 3500 v6.
On any engine just start the engine and open the engine oil cap you will see air coming out (only if you have not put in some kind of head gasket sealer
Is it safe to keep the vehicle even they change the crack cylinder head???
Should be safe, although the crack indicates the engine was overheated, so other parts of the motor might have problems too, from that overheat.
question, have yoy swiss roots?
Pittsburgh?
do you have all these things go wrong with the car. im losing fluid and have a smoke smell. i thought it was oil. but im not losing any oil and i have no water in the oil. i have red antifreeze not green. im thinking that red may have a different smell then green. no power loss and no overheating. cant find any dips or any fluid under the car. also the smoke smell does it mostly when i going up and down hill not on a straight road? and i lose heat but now its bad? i have subscribe to you
Yours sounds like heater core is bad.
i cant turn my car on , it only cranks and coughs 🤣, but the car doesnt overheat at all what is it
Enjoy the videos. I would like to see your opinion on the code p0316 on the ford 1.5 and 2.0 eco boost. We recently purchased a 2017 Ford Edge with a 2.0 that had a crack in cylinder 2 allowing coolant intrusion. Ford has issued no recalls but has issued multiple superseded tsb’s since 2010. Have you heard of this issue.
Just ford things
What the hell is he saying??? Sounds like jibberish!
Bruh take a breath or wait for lunch to digest lmao
Ride on me papi
*bonk* off to horni jail for you.