RO Buddie + DI Unbox & Install

Поділитися
Вставка
  • Опубліковано 22 сер 2024

КОМЕНТАРІ • 41

  • @harlanmichael7088
    @harlanmichael7088 Рік тому +10

    This is the best video I’ve found that explains setup. Great job! :)

    • @tdawgdawgonson3560
      @tdawgdawgonson3560 Рік тому +1

      Like the comment before i even finished the first ad for this video. I guess i need a 30 minute video for something as simple as this, cus these other videos just dont show any specifics at al. All i see it wires going j to places that i cant tell what they are.

  • @silentwater81
    @silentwater81 2 роки тому +4

    Thank you for explaining this system installation so clearly. Keep the great work!

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      You’re very welcome, i’m glad to help in anyway I can.

  • @stevesalisbury8206
    @stevesalisbury8206 5 місяців тому +2

    Di connection is backwards compared to the instructions. It goes from the capped end to your collection vessel.

    • @Burketag
      @Burketag 5 місяців тому +1

      Watching this video 50 gal in to filtering and started to panic until I double checked the instructions.

  • @Jtuck238
    @Jtuck238 Рік тому

    Made my installation so much easier! Thanks for the video

  • @ryangreenleaf7926
    @ryangreenleaf7926 2 роки тому +1

    Nice job. Thanks for the great explanation.

  • @IsisAtena
    @IsisAtena 2 роки тому

    Thank you! This video is better than the company one, it helped me a lot.

  • @Ceeziep
    @Ceeziep 3 місяці тому

    Nice video.. question I can only use my shower head.. would it come with an adapter for that?

  • @muhammadhadi6391
    @muhammadhadi6391 2 роки тому

    Thank you for the step by step my bro! You earned a subscribe. 💯🤜🤛

  • @michaellight8846
    @michaellight8846 26 днів тому

    I wonder how many would take chain ganged together to h zero waste?

  • @ArchangelHornet
    @ArchangelHornet Рік тому

    You can also use your aquarium airpump tubing for the tubes on this rodi unit =)

  • @kevintam5391
    @kevintam5391 2 роки тому +1

    thank you for the good work. is it possible to not mount the system to the wall?

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому +1

      I personally wouldn’t think that it would be a problem, Just make sure the system is vertical.

  • @ladonniealexander5750
    @ladonniealexander5750 5 місяців тому

    How often do you change out the filters?? And would I have to replace the Membrane as well

  • @sheepseven7588
    @sheepseven7588 Рік тому +1

    I set it up and was drinking this water ,but was told it's not for drinking? is it a water purifier for people

    • @novaaquatics9137
      @novaaquatics9137  Рік тому

      Technically it’s is safe to drink and is used for medical reasons but lacks needed minerals for your body and importantly your heart.

  • @danakristhel
    @danakristhel Рік тому

    Hello. Can you drink with the reverse osmosis filter and without the deionizer filter? My city is having a problem with the salinity of the tap water. I would like to know if the version of this product without a deionizer works for me. Thank you.

  • @jreffjeff7909
    @jreffjeff7909 10 місяців тому

    I accidentally ran it with the deox cart still on while the membrane was on just for a few minutes is that a big deal?

  • @MK_Aquatics
    @MK_Aquatics Рік тому

    Is the di filter supposed to be flushed as well?

  • @ripbry95
    @ripbry95 2 роки тому +1

    If you don’t mind me asking what is this purpose for this and thank you Dan

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      The purpose of this is to remove everything from your tapwater except H2O. Pure water is the end result after the reverse osmosis and DI filter. Once you have pure water you can remineralize it with exactly what you want to have inside of your planted aquarium and buffer it to the proper pH of your liking.

  • @ellavarkumnamaskaram
    @ellavarkumnamaskaram 2 роки тому +1

    Do we need to remineralise if there is no di filter? I bought the non di version.

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      I would remineralize to the needed values

    • @ellavarkumnamaskaram
      @ellavarkumnamaskaram 2 роки тому

      @@novaaquatics9137 And wat is the needed value? Its measured in TDS ryt?

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому +1

      @@ellavarkumnamaskaram Yes I would measure TDS to get a general idea and add buffers and remineralize to a proper TDS of your liking

    • @ellavarkumnamaskaram
      @ellavarkumnamaskaram 2 роки тому

      @@novaaquatics9137 Thanku. And is there a particular value u follow for the TDS? is it 150?

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому +1

      @@ellavarkumnamaskaram anything between 120 to 200 is good for most fish. Shrimp like it lower but they require salts and special remineralizer’s

  • @kiviniemifamily4658
    @kiviniemifamily4658 Рік тому

    What connection did you use under the sink. Looking to tap into my water line also

    • @novaaquatics9137
      @novaaquatics9137  Рік тому +3

      I don’t use a connection under the sink I connected to the faucet

  • @chrissieallen4489
    @chrissieallen4489 2 роки тому

    What tube did you hook to the bottom of the di filter?

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      I used remaining tubing that came with this product.
      The tubing attached to the bottom of the DI filter is your actual out flow RO water, so the tubing should lead to a container for this finished product.

  • @Dolfin93
    @Dolfin93 2 роки тому

    How do I get more flow for the filtered side I’m only getting a drip

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      Did you just install it? Or have you had it for a long time

    • @Dolfin93
      @Dolfin93 2 роки тому

      @@novaaquatics9137 i just installed it and not a single drop is coming out now wtf

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      @@Dolfin93 Make sure all your connections are correct. Something is definitely wrong. You might have a bad part but make sure there are no kinks and disconnect and reconnect your tubing. I’m sure it’s something easy that you may have missed.

    • @Dolfin93
      @Dolfin93 2 роки тому

      @@novaaquatics9137 naw I literally did everything exactly like you it started messing up after I put the membrane in

    • @novaaquatics9137
      @novaaquatics9137  2 роки тому

      @@Dolfin93 you might want to talk to the company about this issue. if there is a real issue that can't be fixed at least they can replace defective equipment.