Aquatic Life RO Buddie + DI Installation
Вставка
- Опубліковано 19 лип 2016
- Watch step-by-step how to unpack and setup your new Aquatic Life RO Buddie with Color Changing Deionization Resin. Rated at 50 GPD, this four-stage Reverse Osmosis unit provides economical water while the resin removes the remaining TDS from the membrane filtered water.
- Домашні улюбленці та дикі тварини
very helpful thank you! just set up my system today :)
I'm worried how long mine will (or won't) last. The water comes out of my tap at well over 200 TDS, so it will have its work cut out for it. I've just now finished setting it up and am collecting my first bit of water. Yay!
Setting up my first saltwater..its a summer project ..20 gal long. Do I need one of these and does it have to constantly be connected to the faucet..idk how the connections go back to the tank as in this video he just explained how the device works..
What's the difference between this system and the 4 stages Twist-In, the one that come with cartridge of colors??
Hi, Does this unit need to be in use 24/7? Can I use it once every 2 weeks to produce 40 liters when I need to do a water change for my aquarium? Thank you.
I followed your tutorial but only waste water is produced after I've installed the membrane. I tried reinstalling membrane but same result. Any solution?
Is a flush valve require for this unit?
Do you have to mount it
Como se saca la manguerita es que para mi se me hace dificil
You did not installed Ro Booster pump?
About how many gallons can one membrane filter?
sir without ro boostwr pump ro membrane work?
thanks so much for those
my stupid system didn't come with labels and almost all tutorials just speed through which RO outlet us waste and which is good.
We're glad the video was helpful. Thanks for your feedback!
can I use the rodi water to my tank directly after being made or should I wait and rest the water before use?
RO/DI water does not need to "rest" before use. However, be sure to check your water parameters, such as any needed salt, trace elements, etc.
What do you guys mean by prefilter for nyc tap water?
so is this unit a medium between the supply from the tap to your sump?
Yes, this is a Reverse Osmosis unit with a Deionization cartridge to remove the remaining TDS. The good (membrane filtered) water can be added to your sump or another storage device.
I live in an apartment with water saving internal threaded faucets. Do they make adapters for this?
Jack, yes - these are common adapters. You can find them at most hardware stores like Home Depot and Lowes.
When run water through the ro membrane to flush it, I am not getting any water coming out of the filtered side. Not a drop. I installed just as in the video with the large gasket on top. Will it take the full 30 minutes until it works? Is this normal?
When first installing and flushing the preservative out of the membrane, water should be flowing out of the filtered water and waste water lines. If you don't have water flow coming through the membrane, something isn't working correctly. Please contact our customer support at customersupport@aquaticlife.com or 888-548-3480 (M-F 10-3 PM PST) and we'll be happy to help you get it up and running.
I figured it out. The attachment that goes on the bad ro outlet was not attached and I guess that is what holds pressure and regulates the water. Its working now.
Where is booster pump?
Very good video! Thanks :))
Can I hookup and RO tank to this for storage? and my can i hookup and additional di 2 can to this to filter more? after a 2 days my di cartridge started to change color and i think its because of the iron and all in my water and I'm close to the main city water but not that close?
By the way i am using this water for my chile peppers and lettuce not for drinking
Yes, you can absolutely connect a pressure tank to the RO Buddie. We will be adding a video of connecting a pressure tank to one of other models of RO units in the next few weeks. Connecting to the RO Buddie would be very similar. With regards to the DI being used up quickly, there are a few things you can check - (1) New membranes contain a preservative and need to have about 30 gallons of water run through them before connecting the membrane filtered water line to the DI cartridge. Otherwise, the DI cartridge is absorbing the membrane preservative. (2) If the membrane has been damaged by chlorine, it would not filter properly and this would contribute to a faster depletion of the DI cartridges. (3) If the membrane is not "seated" all the way into the housing, some water could be bypassing the membrane. If you need additional help, shoot us an e-mail at customersupport@aquaticlife.com and we'd be happy to help you trouble-shoot.
How long do the filters usually last
Most people will get 6-8 months from their sediment and carbon cartridges and up to 24 months for their membrane. However, this is all subject to your water quality going into the RO unit. If you have a high TDS reading in your supply water, you will need to change your cartridges and membrane more often.
Hi, thank you for the video, it helps me a lot. I just received the 100GPD Model, 330084 is for 50 GPD membrane, 330093 is for 100 GPD membrane, where can I check these serial number, just wanna make sure I got the right one, thank you!
The box will indicate if it is a 50 or 100 GPD model of RO unit. With regards to the membrane, there is a label on the outer plastic wrap that will indicate if you have item # 330084 (50 GPD Membrane) or item # 330093 (100 GPD Membrane). If the outer plastic wrap has been removed, there is also a label on the Membrane itself. There will be a series of numbers (and sometimes letters) that will end in either a "-50" or "-100". If you need help, shoot us an e-mail at customersupport@aquaticlife.com.
Hi, thanks for the reply. I have the 50 GPD model. It seems the water pressure in my apartment is low. I wanna change the membrane 100 GPD component only to increase the speed. Will it fit to the rest of component of the current 50 model?
The RO Buddie 50 GPD model is built with a 450 CC Flow Restrictor. This is the round cylinder that is connected to the waste water port on the bottom of the Membrane Housing. If you leave the existing 450 CC Flow Restrictor on your unit and install the 100 GPD Membrane, the RO Buddie will work, but the waste ration will become 1 Gallon of good water to 1.7 Gallons of waste water. While this sounds great, it will also deplete your Membrane quickly. To get a longer life out of your 100 GPD Membrane, you would need to replace the 450 CC Flow Restrictor with an 800 CC Flow Restrictor. www.aquaticlife.com/aquatic-life-reverse-osmosis-barrel-style-flow-restrictor-800cc.html
how do i know if i have the right amount of water coming out of my sink for the ro buddie to work properly??
We recommend you turn the cold water faucet on all the way. Hot water can damage the membrane. It's more important to consider the amount of pressure in your water pipes. The RO Buddie works best at 65 PSI. Less than 65 PSI may yield less filtered water.
Let's say I was moving, how would I go about transporting my RO system?
Good question! For the sediment and carbon cartridges, we recommend you flush them without the membrane before using them after your move. If you store them more than one month, we recommend replacing the cartridges.
For the membrane, you will want to remove it from the canister and place it into a clean zip-lock bag with some RO water. It is important to keep the membrane moist and free from contamination. Do not store it with regular tap water--it should only be stored and kept moist with the RO water. You can keep a membrane several months this way before you would need to use a new membrane.
Remember all new membranes come with a chemical preservative that needs to be flushed from the membrane before using the membrane-filtered water. We recommend discarding the first 30 gallons of filtered water to ensure no preservative is left in the water.
Does the unit have to be mounted? Or can it used in a portable fashion?
Also I plan on using mine weekly so can it sit for a week without having to replace or take out anything?
Hi Brandon, The RO Buddie does not need to be mounted to operate. It will function the same if it is mounted vertically or laying on your counter.
Letting a unit sit for a week or two between use is fine.
Can they be kept outside while in use?
All RO units should be kept out of direct sunlight and avoid freezing. The ideal water temperature for most RO units is 77°F. If the water is above or below that temperature, the membrane will not be as efficient.
How long would it take this to make 7 gallons of water?
does this unit have a gpd upgrade?
We're not sure what you mean by "gpd upgrade"? The RO Buddie comes in either a 50 or 100 GPD model. The model that includes the DI Resin cartridge is only a 50 GPD unit.
gallons per day upgrade. can I pair a 50 gpd with another 50 gpd filter to increase the product water and speed up production like other rodi units?
Yes, it is possible to run multiple RO Buddies parallel.
I filled my 29 gallon tank with ro/di water and my di cartridge is already exhausted ! I paid 45 $ before tax for mine and it only lasted for a day , this doesn't seem worth it to me . Is this normal wear for this product and if so what a ripoff.By the way my water was 007 tds before going through di cartridge.
This is unusual, but not the first time we've heard of this issue. Resin can be depleted quickly for a number of reasons. For example, not flushing the preservative from the membrane will deplete the resin quickly. However, since you're using a TDS meter to check the water prior to DI cartridge, we think it is more likely a CO2 issue. If your water supply contains CO2, the resin will be depleted very quickly.
We're guessing you have the 21 CUIN inline resin cartridge that works with the RO Buddie. These resin cartridges are rated at removing 1300-1500 TDS before being exhausted. If your water is 7 TDS, you should be able to filter about 200 gallons of water. We'd suggest checking for CO2 in the membrane-filtered water. If you have questions or need further help, please e-mail us at customersupport@aquaticlife.com and we'll be happy to assist.
I bought leaked today from that water we can drink
only problem i am having is taking off the cap lols
Do you still have the plastic wrench that was included with the RO Buddie? It makes taking the cap off a lot easier. If you need a new one, shoot us an e-mail at customersupport@aquaticlife.com.
i finally got it and i was using the plastic wrench but it was still pretty hard to get it off lols