SpeedyKnock early demo

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ • 64

  • @DCWERX
    @DCWERX 5 років тому +20

    I'm super anxious for this release. Good work as always Josh

  • @ExtraFungus
    @ExtraFungus 5 років тому +9

    You're the man, you said it all, "one of the most requested".

  • @SpoonerTuner
    @SpoonerTuner 3 роки тому

    I sure hope you're able to get this into our hands. We sure need it. Thanks for all your work on it so far!

  • @PeterThwaitesRemap-UK
    @PeterThwaitesRemap-UK 10 місяців тому

    Brilliant! I want one and don't even need one! But looks great and functions great as well

  • @chetronics
    @chetronics 4 роки тому +15

    Where does this project stand now? I started my adventures in speeduino a year ago building my ecu ahead of a build. As of today it runs! Anxious to pair up with this speedy knock.

  • @2tranceform
    @2tranceform 5 років тому

    That's great! This will be a great addition to the diy community. I can't wait! Thank you Josh!

  • @roboman2444
    @roboman2444 4 роки тому +1

    love the bodge wire

  • @V8Power5300
    @V8Power5300 4 роки тому

    Now this just needs to communicate via can bus. Great work

  • @Broke4speed
    @Broke4speed 5 років тому +3

    Heck yeah! I'm definitely interested in how this goes. I'll be converting to Speeduino this summer (MS2 is getting boring, no more development, and MS3 is closed) and I'd love to add one (or two!) to my inline 6. Keep up the good work!

    • @frostyab7579
      @frostyab7579 2 роки тому +1

      MS started off a a cool project and after all the free help turned into a commercial product that is just as expensive and nowhere near as good support as the pro ECUs. Now it's just a way to make few a-holes money.

  • @osvandremolinari
    @osvandremolinari 5 років тому

    Beautiful job, greatings from Brazil.

  • @fuzzymonkey87
    @fuzzymonkey87 5 років тому

    Seriously impressive. Huge fan of your work

  • @XPbIM3
    @XPbIM3 5 років тому +1

    Josh Stewart for president!

  • @3ToeCo
    @3ToeCo 5 років тому +2

    I've got my EJ22 running in my old wagon. I'm really looking forward to having some kind of knock control! Subaru engines are not a fan of knock at all. Det cans are handy, but being able to tune closer to the edge would be lovely.

    • @austindoud273
      @austindoud273 3 роки тому +5

      Suburus engines aren't even a fan of life

  • @Semnyi
    @Semnyi 5 років тому

    Wow such amazing work you have done. im a red seal tech and im looking at getting into engine tuning. i love the idea of opensource software and hardware.
    thanks for sharing

  • @zarkeh3013
    @zarkeh3013 4 роки тому

    ohcrap, speeduino got Srsly SERIOUS! ... last I looked it could only do 4 inj and 4 ign and had to have an external wb02.
    ... also remember diddling with this chip ona vems and using ferd's 4.9l knock sensor (and frequency tune from internet). it worked very well and helped me tune the ignition map.

  • @NLRevZ
    @NLRevZ 5 років тому

    That's awesome! I've been trying to find info on anyone doing a project like this; didn't think it'd be from someone familiar!

  • @MrRichardclough
    @MrRichardclough 4 роки тому

    Can't wait for more

  • @brettschacher8644
    @brettschacher8644 2 роки тому

    So it appears as it has been a while since anyone has posted. We are all wondering how this is progressing I know. Please update us on this. I know I will be needing a knock sense/control for my project.

  • @canaldomancha9033
    @canaldomancha9033 5 років тому +1

    Josh é o cara ! 👏🏾👏🏾👏🏾

  • @protuningaustralia6795
    @protuningaustralia6795 5 років тому

    Hi Josh,
    i will be very keen to purchase and test one of these units on my Speeduino as soon as they are ready for release.

  • @marshall5143
    @marshall5143 5 років тому

    Great work Josh 👍🏼

  • @nottobay6768
    @nottobay6768 3 роки тому

    Nice solder job on that dodge. :p

  • @georgehill9353
    @georgehill9353 2 роки тому

    Looking forward to adding this to my speeduino, thanks for the update.
    P.S. ditch the music.

  • @gerrit2107
    @gerrit2107 5 років тому

    This looks Great!

  • @brettbresnan7078
    @brettbresnan7078 5 років тому

    Looks great

  • @istapitbastard6189
    @istapitbastard6189 5 років тому

    Wonderful work. I wanna be just like you. 😃

  • @simonlagann8178
    @simonlagann8178 5 років тому

    awesome work . keep it up

  • @sierrasport16v
    @sierrasport16v 5 років тому

    Outstanding!!!!

  • @joostsonneveld5407
    @joostsonneveld5407 5 років тому

    incredeble what you are doing!!! Wil order my speeduino this year, first get the stock car on paper, after that the tuning can begin🤘

  • @InterdimensionalWiz
    @InterdimensionalWiz 4 роки тому

    *** PLEASE HELP **** im simply after an approximate RPM from a knock sensor with an arduino.... nothing else. the knock gives a lot of 'noise' and difficult to just get approximate RPM from.
    i am trying a comparitor going to a schmitt and then arduino pulse time frequency counting.... works perfect with a function oscillator..... very accurate..... but then on a knock sensor.... eeeek! too much noise.... any ideas?

  • @midianalbertokhaiyow8195
    @midianalbertokhaiyow8195 5 років тому +2

    which IC you use as a base?.. the TPIC1801?, the AN9770?, the PROSAK IC?, or other?...

    • @midianalbertokhaiyow8195
      @midianalbertokhaiyow8195 5 років тому

      @@Speeduino IT WOULD BE GOOD TO COMPARE THE SENSITIVITY AND THE DETECTION RESPONSE AGAINST A PROFETIONAL EQUIPMENT

    • @questfor10s
      @questfor10s 3 роки тому +1

      I was wondering the same. Looks like he’s using the TPIC8101. Actually I’d like to see how all 3 of those compare w.r.t. sensitivity and signal/noise ratio. The measure of a knock systems is how well it correctly classifies real knock from false knock across a variety of situations.

  • @laszlovona
    @laszlovona 5 років тому

    I also went for an arduino+tpic8101 design for my MS2 (knock window tied to crank position) years ago, but never finished :(. If I may request a feature that would be an auto treshold calibration at low rpm: 1.) An artificial knock would be introduced at low RPM. 2.) a ratio of knock/no knock level is measured in knock window 3.) you can propagate this ratio whole RPM range to have an RPM based treshold curve.

  • @joostsonneveld5407
    @joostsonneveld5407 4 роки тому +1

    josh, how is the knock project now? and thanks for what u are doing for the world and the really good educations!!!

  • @Abricos4440
    @Abricos4440 5 років тому +1

    Where is the knock on display ??? I so only engine noises !!!

    • @Abricos4440
      @Abricos4440 5 років тому

      @@Speeduino I think it would be more understandable if you showed it on video real detonation ... thanks ...

  • @tomasporreca9878
    @tomasporreca9878 5 років тому +1

    Good work. Do you have the schematic and code? I can't find in the wiki speeduino. Thank you very much

  • @richieharcourt
    @richieharcourt 4 роки тому

    Hi Josh, I'm pondering a single cylinder 2 stroke, ignition mapping and knock sense, be very keen to chat some time and run some ideas past you. Cheers Richard Harcourt

  • @craigkilkenny7143
    @craigkilkenny7143 4 роки тому

    Soooooooo cool!!!!!! 🔥😎

  • @protuningaustralia6795
    @protuningaustralia6795 3 роки тому

    Hi Josh,
    have you considered releasing this at all.

  • @frankrause
    @frankrause Рік тому

    This looks really interesting, is there any news on the development?

  • @grapsorz
    @grapsorz 5 років тому

    hmm a knock kontroller is more important then EFI. when you set up a engine system.

  • @bensharp9945
    @bensharp9945 5 років тому

    awesome can wait for the beta boards, whats the sensor of choice, been mapping to today my sprint car at llandow track here in the uk its running speeduino love it

  • @DhavalDedhia
    @DhavalDedhia 4 роки тому

    Any updates on this?when it'll be available?

  • @ALMN8U
    @ALMN8U 5 років тому +2

    Any progress on this?

  • @flyonlynz
    @flyonlynz 3 роки тому

    Anyone got any updates

  • @fyldefactory
    @fyldefactory 2 роки тому

    Hello josh, did this ever come to fruition? I'm very much in the need for one

  • @gaspererjavec7108
    @gaspererjavec7108 5 років тому

    Any news on the availability, i would love to pre-order.

  • @929cosmodude
    @929cosmodude Рік тому

    I'm sure this will be available soon 😂

  • @dwhxyz
    @dwhxyz 5 років тому

    Look really good - would this work with a multi cylinder two stroke engine ?

  • @20kBOOSTED
    @20kBOOSTED 5 років тому

    So what will be the Rev limit and great work Josh

  • @nuottaukko1534
    @nuottaukko1534 5 років тому +1

    Nice job, when it will be for sale?

  • @ciscoperez4271
    @ciscoperez4271 5 років тому

    Yes!!!!.

  • @BrockJaden
    @BrockJaden 4 роки тому

    does it have an output available to tie it in to speeduino to use as an ignition retard for knock correction?

  • @joostsonneveld5407
    @joostsonneveld5407 4 роки тому

    Hey josh how is it up with the project?

  • @Myles8825-
    @Myles8825- Рік тому

    Is this available?

  • @m.m8459
    @m.m8459 5 років тому

    Any news about a beta version ?

  • @davey_projects2977
    @davey_projects2977 4 роки тому

    Can you buy these?

  • @Gn0m4
    @Gn0m4 5 років тому

    any news?

  • @Robertas_Grigas
    @Robertas_Grigas 4 роки тому

    Where's the PayPal link?