Would like to see a video going thru pattern entry scenarios of an non-towered airport in close vicinity to Class B/C. Example - from N/E/S/W into KVBT.
Thank You for all the videos I really understand it now!! God Bless You Guys and my goal is to be a Pilot for American Airlines!! #THANK YOU JESUS 1st!! #FuturePilot’s!!🙏🏽😇🔜👨🏽✈️
One thing that still confuses me is why the one minute inbound legs in the USA. ICAO pans ops do one minute outbound legs then inbound is about being within tolerance of the aid (Eg half scale). TERPS focuses on adjusting the timing of your outbound leg to get one minute inbound and seems more complex. Is it about the protection area?
That would make sense, however, the only way you are going to know how to adjust for your inbound leg is to see if you were early or late to it in the first lap with a normally timed outbound leg. I don’t get it either because that outbound leg could push a plane pretty far if the tail/crosswind is strong enough.
@@captainfantastic6840 yeah icao nations don’t time on the inbound leg (you just care if you’re going to be within tolerance of the aid). Only time the outbound leg.
This discussion lacked two key aspects of hold entry. One, you forgot to mention this only works, as presented, if you’re direct to the fix. Two, you never addressed how to determine the entry. The easiest method is the 70/20 or thumb method.
@@freddyfreeloader1200 Not necessarily; ATC could issue a hold at a fix that is past an upcoming dogleg, in that case you need to either wait until you’re direct that fix or you buy yourself some time and take a look at the chart :) I actually find the entry method quite intuitive; for me the bigger challenge is to copy the entire hold instruction in the first place :)
Unquestionably the clearest explanation I’ve ever gotten
Best explanation I’ve seen. Well done. Thank you for making this stuff available to the flying community!
Great explanation of holding patterns. For myself, I'm a show me first, then let's go demonstrate to cement the concept.
Best method I’ve seen for real world use. Thanks
One of the best holding video. Thank you
Great video. About to do my IFR checkride in Canada and must say you’re videos have helped me from Day one of my PPL.
This is a great visual tricks. Make’s it easy to visualize. Thanks Jason!
I found that Captain Joe’s thumb tip for determining the holding entry made these questions super easy for the written exam.
Great video. As a II always have trouble teaching learners holding. Your videos are a great help.
Great video. The only thing I'd clarify is that you need to be flying on a heading to the fix for this method.
Very good, excellent school and méthodes
If you are using a HSI, you could also use the OBS to help further visualize the inbound track..
Would like to see a video going thru pattern entry scenarios of an non-towered airport in close vicinity to Class B/C. Example - from N/E/S/W into KVBT.
Good job 👏🏼
❤❤❤❤❤❤ it thanks great video
Yes!
Thank You for all the videos I really understand it now!! God Bless You Guys and my goal is to be a Pilot for American Airlines!! #THANK YOU JESUS 1st!! #FuturePilot’s!!🙏🏽😇🔜👨🏽✈️
How far beyond the inbound leg does the protected zone start so that parallel entries don’t violate the rules..?
One thing that still confuses me is why the one minute inbound legs in the USA.
ICAO pans ops do one minute outbound legs then inbound is about being within tolerance of the aid (Eg half scale). TERPS focuses on adjusting the timing of your outbound leg to get one minute inbound and seems more complex. Is it about the protection area?
That would make sense, however, the only way you are going to know how to adjust for your inbound leg is to see if you were early or late to it in the first lap with a normally timed outbound leg. I don’t get it either because that outbound leg could push a plane pretty far if the tail/crosswind is strong enough.
@@captainfantastic6840 yeah icao nations don’t time on the inbound leg (you just care if you’re going to be within tolerance of the aid). Only time the outbound leg.
Me! The holding pattern caused me to flunk my check ride and I might just lose my job now, need to ace the next ride or it’s all over
✋
Hi
🖐
✋🏻
Me
#God’s Plan!!🙏🏽😇❤️🔜👨🏽✈️
nit picking but, all sides of the hold are protected
This discussion lacked two key aspects of hold entry. One, you forgot to mention this only works, as presented, if you’re direct to the fix. Two, you never addressed how to determine the entry. The easiest method is the 70/20 or thumb method.
Isn’t any hold direct to the fix first?
@@freddyfreeloader1200 Not necessarily; ATC could issue a hold at a fix that is past an upcoming dogleg, in that case you need to either wait until you’re direct that fix or you buy yourself some time and take a look at the chart :)
I actually find the entry method quite intuitive; for me the bigger challenge is to copy the entire hold instruction in the first place :)