Moving A fuse board/consumer unit, Exotic life of an Electrician
Вставка
- Опубліковано 30 вер 2020
- Moving A fuse board/consumer unit down to a more accessible place and upgrading it,
old moving a fuse board video, • Moving A Fuseboard/Con...
EGTE Monday Club: • The Electricians' Mond...
make sure to subscribe to ETGE as more content to come
The Gewiss Adaptable boxes I use: amzn.to/3jhIncD
Preciva Crimper Plier Set: amzn.to/3jsx14Z
C.K T3213 Sheet Steel Holesaw Set: amzn.to/31ECxeN
C.K amour slice: amzn.to/2YPiSHb
Bosch Professional hoover: amzn.to/31Fo9Tt
Rhino trade insurance use code BUNDY10 on the phone or online, www.rhinotradeinsurance.com/quote. 0116243790
www.expertelectrical.co.uk for fuse box boards USE BUNDY10 for discount.
This video is for entertainment purposes only and is in no way intended as a guide or 'how to'.
If you would like to support me further I now have a Patreon page. If you would like to become patron please follow the link below. This will enable to me to create much more content for you, thank you!
/ nickbundyelectrical
Nice qaulity job
Nice 👌
I wondered how you extended to a new location.
Makes sense
Nice work man. But 16:30 a long day 😅😅
64k now mate
Which of your videos shows your homemade CU set up for when you do rewires ?
Great tiy work and very clean
@N Bundy Electrical...can you please provide a link for the Din rail and the connectors you used...cheers.
What torque setting for terminals in adapter box did you use please.
Setup in the new van is epic.
Only one thing confused me. If you was expending circuits for new board. Why didn't you pit DB nearer supply. No need to down grade to 63A?
Lovely job 😍
What's the make of your wire strippers mate
Thanks for the video. I have to replace and move the fuse board exactly like yours. Your wiring in the fuse board is perfect. I can never lay out the wires as u do. Will try harder.
Adam is already a great electrician. That is a great reflection on your support and patience and fantastic encouragement. You made work enjoyable for him. I suspect he has also made not only life easier for you but given you so much more in terms of the banter. U good job....good luck to Adam on the driving test. It would be great at some point to see how the extended cables with the DIN rails changed the test results or not. Whenever you get the chance again. Very nice job.
Math Man I’m curious about this too.. the Viking connectors are made for this purpose and are widely used in pre populated electrical fuseboards (wardrobe sized), I couldn’t think of any better connector for the job he needed to do apart from soldering and insulating each one with resinated heat shrink, which by the end would look like a ✊💦. So he made it enclosed, tidy and accessible for maintenance..That kid is leaning how to work at a level of installation execution that I don’t see much around here to be honest.. as for most electricians they’d fill that box with the good old connector block and push the wiring spider web in to close the lid.. would you use a ferrule and crimp 2 wires before putting them into a terminal? if the kid keeps his 👀 well open and puts the same pride into the execution, he’ll be a very good spark. Being an electrician isn’t just about measuring Zs, it’s also an art and if you do it correctly, your testing will always be inside the parameters.. I’d definitely stop a minute to enjoy that skilled work if I opened the lid to check the screws torque on the Viking’s..
Filipe S. Here here
100 % Adam has come along way and gives ad good as he gets lol. I remember early days but all credit to his mentor aka tormentor 😂 nicely done.
Is this Adams last job after saying no to the flexible conduit
I think the DIN rail mounting blanks look so much better than the metal ones.
Your van set up looks very efficient.
April 2006, only new colours to be used.
Its good job. Weldone
Am an Electrician did 14th Edd, then 15th, and 16th refresher with IEE Regs , and have done 100s of Con Unit Changes, various styles from Voltage/Current ELCB/ RCDs , Rewireable/Cartridge/MCB-RCD and now RCBO , have used the DIN Rail connections but for a small installation Line Crimps were ideal,when installed correctly , even for 16/25mm short length. Now everything changes, some Good some Not and the Kit/Tools are Fantastic.
Was just thinking that in-line crimps give a good maintenance-free connection and would fit into a smaller box. Certainly cheaper too.
Good luck Adam 🍀 🤪
lol thanks Chris ill pass it on
It must be amazing to terminate a consumer unit without having to arrange the breakers to match how much length is on the cables. Nice job.
great job
Very neat install you guys are a great team.
I'm sat in the office watching on my mac, and the wife is on her computer doing some work. 19 minutes into the video and she turns round and says " Are they actually gonna do the board, or just talk about it!" lol
I know. The customer wants a coffee ! 🤣
😂😂😂
I’d agree, they can talk alright! Nick do you make any money??
I have watched 4 videos and not seen him do any work yet. All he does is talk 😂😂
@@steveg4iwr I actually don’t know how he’s making any money. Thank god he has Adam. It takes ages to make and edit those vids. Unless he’s making the moola on the back end when we click and watch??
Great workmanship guys 🙌💪
I normally only work with one other electrician who works to the same standard as me we have been in the game for 36 years and its its good to see fresh sparks who seem to take some pride in what he does the way your board is wired is what I expect to see when removing the front panel but so rarely do, unfortunately some sparks are animals and in my opinion should not be doing the job I remember my father telling me when I started if you wouldn't do it in your own home don't do it in somebody else's.
Lovely to see you using ferals.... If any sparks are watching.... USE FERALS
You need to get some hole punches for the consumer units epic no shards of metal everywhere no burns and you can do knockouts on any mounted metal housing brilliant
I'm loving the van mate hope it works out well for ya
Enjoyed the video as I don’t do domestic. Very neat and tidy.
Great video and advice too!
Cracking job & vid as usual Nick. Big thank you as you’ve made me realise why I have very low resistance readings on my kitchen ring cpc, I’m convinced it’s interconnected somewhere. Customer had a recent board move & there’s an adaptable box full of those green & yellow din rail connectors. 👍
🙌🙌
Awesome tidy job buddy.
Viking connectors on din rail.. ferrules to join 2 wires at a terminal.. you British? That’s quality work, Spotless 👌
good luck adam if anything like your workmanship you will have noo problem
Very neat. Lovely job.
very neat nice job though chaps.
Butifull job.well done
Vert nice indeed! Hi from Thailand!
Good luck Adam 👌🏻
I feel like a handy product idea would be flat fronts for old boards. In a situation like this you could leave the old box and DIN rail for the new wiring blocks and then just put a flat front on it so you don't need to take out the old box. Would probably keep everything more organized too since you could land a circuit into the wiring blocks as you take out each breaker.
I was thinking exactly the same. A blanking plate for the old board to cap it off.
no you good job nick well done adam
Good luck on your driving test Adam 🚘🚙🚚
Nice work ted 👍🏻
lovely job Nicholas 👌🏼⚡️
Nice job! 👍
Smart install and van looking good
Dave Savo will love the neatness. 😂
Just started my level 2 course and I’m sure your videos are guna be a great help! So thank you in advance 👍 fuse box was proper neat and tidy, love it
Really nice end product!
Very smart tidy install with a couple of spare ways, as no doubt Jordan (Artisan) will be round next week to fit an EV charge point, best of luck Adam for your test, I hope we haven't spooked him, I wouldn't fancy my chances now at a driving test, I took it in 1971 in Jesey CI, it took 12 minutes and passed
new subscriber and i would like to say thank you for not swearing .
Not a problem bud 👍 thanks
Good Luck Adam!
Nice to see a job done right. When my board was moved due to a garage conversion the sparkle used 5 strips of 30a chocolate block to extend the wiring. Luckily he used a proper box to put them in, pity he didn’t use grommets though.
Another good vid. Good luck on the test Adam, relax and you will piss it.
Good luck to Adam for his driving test. I will give him some good advice being just relax and ask questions to the examiner
Just wanted to know why you got funny readings for earth, is it not the same case inside the Consumer?
Excellent job nick and adam. Truly professional work and very well explained. Keep up the good work lads
sorry nick, but i do not agree with crimped cables on AC.any sort of back emf under load , heat can cause expansion making crimps loose dodgy but thats me, alright for dc wiring on motorbikes and cars etc, but then again we used to use burndy crimper to put lugs on aliminium three phase cables in switch gear? sometimes iee regs do not make sense to me.
bootlace ferrule on wires good job
Ooohhhh a 40 minute long nick bundy video. Let me grab my Tesco croissants 👍👍
It's great to see that you are using proper Din rail terminals and not Wago connectors.... Please keep this up as it makes the job a good one+ if you have to test circuits in the future it's a lot easier
You good job!!
GEE WIZ..
That’s a work of art 👍 love your content. Good luck to Adam.
Nice job nick and good luck Adam for your test 👍
Spaces between rcbos? Thoughts people? And crimping. Necessary?
The board doesn't worry me although props to the customer for going ahead and updating his protective devices 👍👍👍 good customer award 🏆
...the only thing that bothers me is that someone artexed a ceiling less than 15 years ago 🤦♂️😆
Fantastic job guys, as always, super neat board. Old (er/ish) guy retraining for a different career so videos are a great way to relax and learn at the same time. I need to find someone like you to work with during my training...seems like a difficult task at the moment.
You good job
Love the van, mine needs sorting, you'd think Oscar the grouch is about to pop out
great job mate very neat :)
Nice one
Good video
Id love to work for N Bundy.. i think it would b a great laugh all day with them.
Watch all your vids, keep them coming, learnt so much already 💪🏽👍🏽
Look at that van !! Black and slick and 😎🤤👍🍔🍟😝
Ring circuits and the use of 240 volt , minimizes the need for many circuits(outlets).
38:47 measure the length you need the total label, divide by the number of slots, enter that as your spacing size. easy.
clean!
You good job 👍
A toggle clamp would be perfect for your long level 👍🏼
Looks really neat, good luck to Adam on his driving test
Conjoined is a word!!!
Top work. I have been looking for a crimper, but have ordered the one you use because for 20 notes that looks pretty good.
Very tidy!
Good luck adam hope you pass so you can get amongst that new van 🤣
Great Video Nick and Adam, nice job and thanks for the mention.
🙌
@@NBundyElectrical I will give you a shoutout to my 29 subs. I am sure they will give you a watch 🤣🤣🤣
I wouldn't use a torque driver to 'screw' that will put the calibration out of whack, and since it's quite low torque, it could be wildly out.
Hey up like they say oop north😂 nice neat job just not enough flexiCon!
You good job Adam good job Good luck Adam on your driving test.
Ahh mate, that's SO tidy! Good work - and good luck to Adam, I'm sure he'll be fine :D
Cheers kip 👍
Good luck with the driving test i passed mine a week ago. After being cancelled 3 times cos of lockdown
Just a bit of extra cream going forward, mark up the legs of the ring finals so you know which L/N & cpc corresponds. So when you or someone else has to do testing at the dB you don’t have to pull out the legs and mess up the neatness.
So, you've stripped out a perfectly adequate fully functioning consumers unit then replaced it by inserted 50 joints at the start of the field wiring thereby reducing its integrity! Pedantry and excessive use of BS7671 regs have prevailed on this install. Practicality, common sense, and fairness has not.
Yay a long video
Tell the customer that Ocado are now taking carrier bags back. They have got nearly as many as I had!
Those din rail connectors are offset because they"re upside down compared to the others. Had me a few times that. They look the same but the clips on the back are slightly off set.
Legend good to know 👍
Congratulations on 20k
David Savoury? Sounds like someone from one of those films I've heard about... apparently...
Tell them to fit a v.fase box voltage optimisers
Any type A RCBOs for all the dc equipment ?