⚠️ ALL IN ONE POLISHES WORK BETTER THAN YOU THINK!
Вставка
- Опубліковано 29 вер 2024
- ✤Hey Everyone.
✤Welcome to my channel “ Miranda Detailing ” ✤
Many detailers don't know how to use an All In One polish. They think it only fills swirls and they will reappear after a wash. Let me show you how to use an All On One Polish in a way that gets awesome results!
3D Speed. amzn.to/3MS2pe5
Vonixx Blend. amzn.to/3MS2tdP
Yellow Rupes Pad. bit.ly/3XLQyEt
Orange LC Pads. bit.ly/3MMH2L4
🔧 Product Showcase and Discounts:
Car Supplies Warehouse ★ bit.ly/34kcPNC
For My Fellow Detailers in Canada: carzilla.ca/?r...
Use code MIRANDA5 for %5 Off
Pump sprayer hack! • Pump Sprayer HACK #det...
Grab a Box of amazing detailing products below
Sign up here: gloveboxdetail...
Use code Miranda20 for 20% OFF
🛒✅ HUGE List Of Products, Tools, & FREE Detailing Forms Here!✅ mirandadetaili...
☕ Support us with Coffee:
Love what we do? Buy us a coffee at s.trdcfe.me/69NBzW
👕 Get Your Detailing Merch:
Visit our online store for exclusive detailing merchandise: bit.ly/3O0b3YN
🧽🧪Tools and Chemicals
Exterior Products:
★Koch Chemie PLAST STAR. bit.ly/3TO8RHs
★Koch Chemie GUMMIFIX. bit.ly/3trTwls
★Koch Chemie Multi Star APC. bit.ly/3trmphF
★Glass Coating. armourdetailsu...
★Sudslab Products: amzn.to/3I6Vwmf
★Pheonix EOD Products: www.phoenixeod...
★Clear Buckets: bit.ly/3lHXayY
★Foam Cannon: bit.ly/3HDEESA
★Pressure Washer Gun: bit.ly/3vZX25l
★Pressure Washer Gun Tip; bit.ly/3I3V4mU
★BLO Handheld Drier: bit.ly/3eKe2mb
★Wash Mitts. bit.ly/3TMuhTA
👕Visit our online store to purchase STUFF!
teespring.com/...
Carzilla Online Detailing Store. carzilla.ca/?r...
Use Code MIRANDA10 for 10% OFF!
Brunt Workwear. bruntworkwear.com/miranda10
Use code MIRANDA10 FOR 10% OFF
Maxshine Products. maxshineusa.com
Use Code MIRANDA15 for 15% off
💎 Professional Detailing Services:
If you prefer to leave it to the experts, check out our detailing services at Miranda Detailing Services or contact us at 804-972-3051.
🌐 Stay Connected:
Visit our website at www.mirandadetailing.com for more information.
ツ HOPE YOU GUYS ENJOY THIS VIDEO!
💖 If you enjoy this video, Please 🅻🅸🅺🅴 👍 and 🔗 🆂🅷🅰🆁🅴 it.
👉 Don't forget to subscribe 👇🏻 to this channel & press the bell 🔔 for more updates.
👉 🆂🆄🅱🆂🅲🆁🅸🅱🅴 🅽🅾🆆!- goo.gl/DzwJ9W 💚
💬 Don't forget to tell me your opinion in the comments below.
------------------------------------------------------------------------------------------------------------
🎥 SUGGESTED VIDEOS:
🎬My Vlog: Learn How To Wash Your Car At Home With This Easy Guide!
✅ • Learn How To Wash Your...
🎬 My Vlog: Should You Pre Rinse Or NOT? #detailingtips #detailing
✅ • Should You Pre Rinse O...
🎬 My Vlog: This Ceramic Coating Will Make Your Vehicle Insanely Easy To Clean! (Maintenance Detail)
✅ • ⚠️This Ceramic Coating...
🎬 My Vlog: Watch This Before You Start Polishing Car Paint! (Even MORE Juicy Details) #detailing #cardetailing
✅ • 🌟Watch This Before You...
💢 🅵🅾🅻🅻🅾🆆 🅼🅴 🅾🅽:
Thank you for supporting “Miranda Detailing”. You can follow me on the Social Media Links Below
📌 Instagram - / miranda__detailing
🔎 Facebook- / mirandadetailing
⭐ Visit My Website - mirandadetaili...
And considering the most BMW s clear coat is on the hard side. It's a pretty amazing product!! Great video phil!! 👍🏻 🇨🇦
3D Speed! Easy to use and Corrects like a beast!
Very well put video. Explanations and examples are clear and straight forward. I appreciate your videos. Cheers
Thanks!
3D One Is amazing love that product.
Good job .... 3 D speed is fantastic
Hi Phil i also use 3d speed I like it a lot but I recently used p@s playmaker it is quite similar to 3d with beading quality 👍
Awesome! Thanks for sharing!
Great explanation and alot of value right there for beginners.
Thanks man!
I agree bro, I agree! I've been using using 3d speed and 3d one, and love em, CG aio not bad, Griots BOSS, Sonax, Koch Chemie, Meguiar's, CG P4 and C4, and their 4 partr system, I'm not a fan of CG. Not because it didn't work but it's 80s tech. you get a ton of fling and it dries very quickly. The rest aweome! Heck I still use Meg cleaner wax in a pinch once in awhile. I DO like the CG hexlogix pads, I find them comparable to the LCC. Keep it up bro. The common sense you use has always served me well also! lol
Thanks for sharing! 😎👍🏼
I've used 3D Speed. Really good product. It lasted around 2 to 3 months. It is very easy to apply and remove and can be used in sunlight. I have switched to CarPro Essence for its ceramic protection and can be used as a primer for coatings. Great video, like always.
Awesome! Thanks for sharing!
I’ve been a great believer in AIO’s , right back to when they were cleaner/waxes . I’m really loving your latest videos Phil!
Thanks! 😎👍🏼
I've used Blend for a one step and then topped it with the Blend Black edition. Worked great and looked great after. Every Vonixx product I've used has been good.
Thanks for watching and sharing! 😎👍🏼
I like these videos. But honestly, I never understood when to use an “all in one”. From a time perspective for professionals, I see the application, especially if you have regular customers. I have used them but honestly couldn’t say if they performed like they were intended. Still a great video, learned some new things, which is always a good thing, and I will give them a another go when the situation arises. Till the next one.
I don't think the protection was still there, I think it was just the paint was so clean that it was beading water, try another test using 3D one, then we'll know if it is the protection still there.
Very possibly so. The test was to see how an AIO in particular can remover defects, because so many people think it only fills. I definitely know that 3D one can. It’s also awesome stuff! Thanks for watching. 😎👍🏼
Love Vonixx blend. Did a red truck and turned out amazing!
Awesome! Love to hear that!
Yes, awesome
Would 3D speed be a good water spot remover?
Ive been using Speed and 505 correction glaze (also 3D) for a few years now and i can tell you that my findings are the same as yours. When used properly, they remove the swirls. When i get the cars back in after a few months, they still look great. I use the Flex forced drive polisher and either the Lake Country orange or blue pads, or something similar. Most of my machine polish jobs are one steps using these products and if worked for 6-8 passes starting with heavy pressure then finishing up with light pressure, i can get 95 - 100% defect removal on softer paints and 80-90% on harder paints. Usually all that remain are the random deeper scratches that require wool and heavy compounding. The 3D 505 has a little more cut than Speed but Speed leaves more of a wet look finish due to the silicone polymers it contains. Both great products that id be lost without. The reason i prefer them over using a true compound like 3D ONE is because the wax content in them makes the wipe off quicker. Once done with the one step i normally wipe over with 3D Bead It Up and it boosts the gloss further and bolsters the protection.
Awesome findings!! I haven’t tried the 505 version yet but heard it’s awesome like you mentioned. Thanks for sharing!
First of all, how do you like the Rupes polisher? And second of all, do folks say that a.i.o. are fillers? I've polished a black Ford truck to about 90% defect free, only to have it come back completely swirled again by the owner. I took pictures of the hood both times, and swirls were completely different. Polish didn't fill in and wash off. Good proofing video, Phil. Hi wife
It’s pretty good! I have a video I still need to edit on my thoughts on it.
Yeah I have talked to many detailers and watch detailers on UA-cam say that AIO only fill. But perhaps more people have used them properly since then and that idea is know myth busted. I started using 3Dspeed years ago when it came out and used it the same way we use it today and got awesome results, then I would comment in forums and tell people that it’s awesome and actually corrects and I would get thrashed for saying that!
A video from autogeek ( I think) with the owner or ceo of 3d said the only difference between 3d speed and 3d one was the protection in speed
When 3D speed came out it was actually HD Polish as the base. It feels very different than 3D one.
3D speed with a microfiber cutting pad is a great combo.
Indeed!! 👍🏼👍🏼
What a great video to Phil about learnt so much, thankyou
Thanks!
Looks good Phill
Hi, will you be reviewing Pans' own new CLEAR Range ?. It supposed to be the top range.
Phil a great instructional video. So how does your Rupes cordeless compare to your SPTA cordless polishers?
Saying a all in one does not correct is pretty nieve a finishing pad by itself ha some form of correction
Agreed
Exactly!
Another great video, thanks Phil
Thanks 👍
Use Speed with age and color and storage of the paint/vehicle as determining factor.
As always awesome content and great advice!!👍🏻👍🏻
The guys over at detail ground told me that Vonixx retooled blend to add a bit more cut to it. I've used it a few times and absolutely love it.
Very grateful for your videos 😊
Thanks for watching!
Shoutout from Arkansas
Welcome!
@@MirandaDetailing long time viewer I watch most of your videos! Glow n shine detail in Little Rock Arkansas
How do you like the Rupes HLR?
Yeah it’s nice, I have a video I need to edit where I compare it to the SPTA we usually use.
@@MirandaDetailing it sounds and looks nice
Self appointed experts tell me not to buy anything Rupes but you know what? I love every product I’ve bought
I learnt long ago to find things out for myself
I’ve been detailing for 55 years now and still love it
I’m thoroughly enjoying your ‘Balderdash’ videos!
@@lewisreinhold6398 thanks!
Gotta vote, BLUE, baby 💙