We will try this and hope it works as well as yours did. If we disconnect the battery it works for a bit then goes back to the error. We will lock for the part on Amazon.
My 04 quit while plowing snow. I manually shifted it into neutral, starter motor engaged but will not fire. did your 4 wheeler fire up in neutral or is that an indicator the shift motor and possibly the angle sensor is bad?
I need ur help so when u turned u fourweeler on beside the N had a red light then it truned off my fourweeler has the red light thing and when i turned it on it had the red light turned on and the R is on but when i tried switching the thing to N it dont work
When that happens, I usually (while seated) grab both handles with my hands and try to use my body's momentum to throw all my weight forward and then backwards a few times and then the gear shows up again in the display. I think sometimes it the shifter gets stuck between and needs a little coaxing. Hope that helps.
@@JuarezDerrick I actually got one a few weeks ago before I got it it didn't shift at all bought the fourwheller abt a month ago the previous owner dogged the hell out of it tho I think it's the angle sensor tbh
There is brushes inside of that control motor. We pulled one apart today and there was no springs behind the brushes we tore apart a Zippo later through the springs into it and it works fine now.. I recommend better and bigger springs as the lighter springs did not work the greatest and we'll need replaced with something better
mine left me in reverse - and i had to go in reverse back to the truck - back at camp - the issue was a week battery- out charger on for thirty minutes and presto it shifts
interesting. im having trouble wiht my 04 rubicon 500 with the e shift and i did a measurement and mine is reading 00.9 0.1 ohms. Making me think its on its way out because your new one there is reading a much high ohm reading than mine.
Hello, there is a problem on my 2008 Honda trx250tm ES fourtrax. the indicator on the display shows a different position compared to the position on the gearbox. for example on the screen it says that the gearbox is in first gear, but the gearbox is actually in neutral and the green light for neutral does not light up. when I press the small handle and the button down to put it in reverse, the green light for neutral comes on and the gearbox is in reverse gear. I note that I can't get the letter R on the screen at all. I changed the angle sensor but everything is the same. Does anyone have a solution?
My 2008 rancher 400trx fa is slipping the clutch one’s it gets to temp when cold is fine but once it runs for like 1-2 min starts slipping anyone had this problem
Same here, have a 98 honda forman 450, neutral light doesn't blink, i can start her up, but no matter how many times i click upshift, it wont do anything.
We will try this and hope it works as well as yours did. If we disconnect the battery it works for a bit then goes back to the error. We will lock for the part on Amazon.
Should be able to test that motor connected or not connected to see if it’s good or bad
My 04 quit while plowing snow. I manually shifted it into neutral, starter motor engaged but will not fire. did your 4 wheeler fire up in neutral or is that an indicator the shift motor and possibly the angle sensor is bad?
i just said screw it and welded a wrench to the auxiliary shifting shaft and then welded a pipe to that wrench and made it like a stick shift.
They make shifter
Levers for them. I was gonna get one. Will it mess up the tranny by shifting it normal or its ok?
@@tdubbs934 no. if you do that, you'd be pretty much doing the same thing the electric motor is doing.
I did that and it’s worked for a while but now it won’t shift at all do you know why?
@@michaelweeden1073make sure to take the gears out of the shift motor then reattach the motor empty
Never work on it with it on..
Disco the battery.
You could smoke your ecu.
Great video. I just inherited a red one. It says 4x4 but 8 cannot find any switches to put in 4x4. Any tips ?
All time 4x4
What would you think If I only have 1.2 ohms of resistance
Did you find an answer to this? Im only getting 2 ohms myself
My rancher is stalling whenever i go from N to first same with R . Cant find to much info on the subject. Any ideas?
Thanks - Really informative
If the electric shift motor is messed up with it not let it shift manually?
Nice job. Very helpful, quick and easy. Thanks!
My is got power but it’s only 2,5. Is it still good?
Well done!! Jim in California
I need ur help so when u turned u fourweeler on beside the N had a red light then it truned off my fourweeler has the red light thing and when i turned it on it had the red light turned on and the R is on but when i tried switching the thing to N it dont work
Thanks for the vid!
My four wheeler is stuck in 4th gear and the manual leaver thats on the side, I can get it to move. Any ideas?
Sounds simple but try and roll it backwards and forwards and just keep trying to downshift
Where did you get the gear selector motor I seen them on Amazon.
Amazon duh
Mine gets stuck won't down shift or up shift and don't show gear sometimes
When that happens, I usually (while seated) grab both handles with my hands and try to use my body's momentum to throw all my weight forward and then backwards a few times and then the gear shows up again in the display. I think sometimes it the shifter gets stuck between and needs a little coaxing. Hope that helps.
Mine shifts when it wants to and don't shift other times. When it's not running it shifts all the time.
I have the same problem lmfao
@@alex3277 I found out that it isn't getting enough power. Get a brand new battery homie
@@JuarezDerrick I actually got one a few weeks ago before I got it it didn't shift at all bought the fourwheller abt a month ago the previous owner dogged the hell out of it tho I think it's the angle sensor tbh
There is brushes inside of that control motor. We pulled one apart today and there was no springs behind the brushes we tore apart a Zippo later through the springs into it and it works fine now.. I recommend better and bigger springs as the lighter springs did not work the greatest and we'll need replaced with something better
I wound up breaking all the gears so now I just shifted manually. I put a socket and breaker bar on it and shift by hand
mine left me in reverse - and i had to go in reverse back to the truck - back at camp - the issue was a week battery- out charger on for thirty minutes and presto it shifts
Would it be the same part # for a 2006 model?
yes 2000 to 2006
interesting. im having trouble wiht my 04 rubicon 500 with the e shift and i did a measurement and mine is reading 00.9 0.1 ohms. Making me think its on its way out because your new one there is reading a much high ohm reading than mine.
Hello, there is a problem on my 2008 Honda trx250tm ES fourtrax. the indicator on the display shows a different position compared to the position on the gearbox. for example on the screen it says that the gearbox is in first gear, but the gearbox is actually in neutral and the green light for neutral does not light up. when I press the small handle and the button down to put it in reverse, the green light for neutral comes on and the gearbox is in reverse gear. I note that I can't get the letter R on the screen at all. I changed the angle sensor but everything is the same. Does anyone have a solution?
did you figure it out same problem i’m having. angle sensor thinks reverse is nuetral
@@mallardmob Not yet. i must go to honda service soon.
My 2008 rancher 400trx fa is slipping the clutch one’s it gets to temp when cold is fine but once it runs for like 1-2 min starts slipping anyone had this problem
That meant overload which is an open circuit
My shift buttons do nothing and the neutral is not flashing.
Same here, have a 98 honda forman 450, neutral light doesn't blink, i can start her up, but no matter how many times i click upshift, it wont do anything.
Probably your handlebar buttons need replaced
Out of curiousity, why is your display showing 999999.9 hours?
Mine does the same thing
6:05 6:08
Buy a foot manual shift next time...problem solved
O.L is infinite resistance, not no resistance
I wasn’t so lucky…
Thank you