Best Ambient light kit - Installation on my BMW E91 - E90 E91 E92 DIY
Вставка
- Опубліковано 17 кві 2023
- Greetings everyone, in this video, I would like to introduce you to an exceptional ambient lighting kit that I came across, which I believe will be an excellent addition to your car. Today, we will be installing this kit on our 2006 BMW E91 330d. I have previously reviewed and installed two different kits, but this one is by far the most exceptional!
Now, let's talk about the most noticeable differences between this kit and others that I have used in the past. Firstly, it has an OEM look, which means it blends in perfectly with your car's interior. Secondly, it comes with a slimmer fiber optic cable and fully integrated LEDs, which means that you no longer have to deal with one bulb powering fiber optic. Thirdly, it is five times brighter, making it the perfect choice for those who prefer brighter lighting. Fourthly, it is fully RGB, which can be controlled through a remote or an app. Additionally, this kit comes with footwell lights, door handles, and glovebox lights. Lastly, there are no hotspots to worry about.
With all that being said, let's get started on the installation process.
here the link where u can buy these kits:
Alternativelink for Germany amzn.to/3tYekAM
amzn.to/3GRaqNw for Germany
amzn.to/3HbWmi6 for UK - Авто та транспорт
Just got a set for my e90, going to install later!!. I would normally find a cheaper alternative but ive seen first hand how bad cheap ones are. This video sold me since its the same car as mine and i can see the final result. Thanks again!
Looks IRL even better! amazing work 👌🏽
Looks amazing. Deffinetly makes the car look and feel better. Nice work!
Thanks, yeah thats true it makes the car feel way newer
Ee und die Arbeit im Home Premium oder die anderen beiden sind sehr gut und die anderen beiden Termine für die Info und die Arbeit im Home Office in freier Natur und die anderen beiden
@@garage.86 can you write name of that
Where did you connect the center console?
Normally I think these dont look so great but this installation is awesome. It looks great. Thanks for the video!
Glad you like them!
Yeah, that looks really good right along with the scratches you put on the hood of your car from the mid range speaker magnet nice job
hood needs to be painted anyway so no worries
Where did you wire up the lights on the dash ?
Looking good
Sieht sehr gut aus, danke für dein Tutorial. Kann man die Startanimation ändern oder kommt der Lichtstrahl immer in Lila?
nice man. that kit looks much better than mine. mine still shows orange
Looks good
Nice Jungs das ist mal endlich ein korrektes Video nach dem ich gesucht habe gut Erklärt Weiter so
Freut mich das wir helfen konnten und danke 😊
Is that bravery plonking the door liner right on the bonnet! Paint work!
Ouuuuuu now that’s a mod ! That’s hard !
Richtig gutes Video hab es nach bestellt aber bitte wie habt ihr das Hauptmodul angeschlossen mit was für einem Kabel oder einer sicherung bzw. wie ?
Where do u draw the power from?
looks nice !
Sehr gutes Video. Ich habe die selbe Ambientebeleuchtung aber eine andere App mit weniger Einstllmöglichkeiten, welche hast du benutzt? Kann man die Welcome-Funktion ändern oder deaktivieren?
Danke🙏🏼
Sehr gutes Video! Könntet ihr mir sagen wie die App heißt?
Hello are there any links for this kit in the US? If so it would be great. Thanks
Where did you put power for dash and how
What’s the name of the kit?
That's a real nice ambient setup and off topic, what suspension did you use to lower your car?
Thanks bro, i run KW v2 coilovers with 20mm spacers at the front and 25mm at the rear
Wheels are 9x19 with an offset of and 225/35 19 and 10x19 offset 45 with 235/35 19 :)
Can you stop the start animation and start with solid color ? Is this have dual mode color a?
How did you push them in that far? And also how did you get them that straight?
Probably the best ambient lighting kit I've seen to date! Do you reckon it would fit perfectly in a e92? Given that the doors are longer than the e91?
Smashed it with the install though!
Thanks mate, i think it would fit in a e92 the light strips for the doors are 75cm long i think it should be perfekt :)
The door on a e92 is 1.5 meters long
@@zussstudios7189 did you ever try one ?
I think it would have looked a little better if you put the door handle lights on the bottom-side so the handle would cover the dot, but otherwise nice work!
yeah i wasnt sure where to put it , Thanks ! :)
Door handle light should be mounted at the very top facing down so the source is not visible, you have mounted it on the vertical panel facing inwards towards the occupants. I'm not sure if the suggested way is possible on this bmw but that's where oem lights are installed, very top facing down and thats where I would try to install it.
@@emalior5000 yeah i know but i did the best to mount it as var up as possible :)
@@garage.86 yeah bmw and German cars have very minimal access behind the door panels. Still looks awesome
Dove avete collegato il positivo delle centralina madre ? Cioè quella delle luci del cruscotto
Moin, wie habt ihr es an der tür angeschlossen? Es schein mir so als hätte das kabel für die fenster nicht genügend power.
App car play and the car is 📈💶 fire 🔥
thats gona be in the next video 😁
Sharp sharp sharp
Is there any update now, for the animation on the app?
Bravo majstore tacno tako treba da izgleda super de mi samo reci jel baš svjetli jako ono prao atmosferno ili malo tamni
svjetli dosta jako kad se nastella na max a moze i skroz tamno za kad vozi po noci
Von wo hast du den strom für das hauptmodul(armaturenbrett)? Über welche sicherung?
how does it look when driving in daylight
Hab das beim E60 auch gemacht vorne in den Türen kann man Plus vom Lautsprecher nehmen. Dann leuchten die sobald Zündung an ist und nicht nur wenn die Lichter eingeschaltet sind. Hinten musste ich Strom von der vorderen Sitzverstellung nehmen unter den Teppich verlegen, entlang der B-Säule und dann durch die Tür. Trotzdem habt ihr sehr saubere Arbeit geleistet. Hammer Ergebnis. Sollte keine Kritik sein nur halt ein Tipp vielleicht fürs nächste Mal
ah cool wusste nicht das man die Stromversorgung auch vom Lautsprecher nehmen kann :) Danke !
All in English ? Oder seid ihr Almans? 😁
Where did you power the host box? I used the window cables to power the assist boxes but I don’t know where to power the host box.
Check with an multimeter in the fusebox the empty spots if there is anything wheres only power when ignition is turned on then u can take power from there
great video man! can you change the brightness?
Thanks bro :) yeah u can change the brightness
Which of the links are the one you use? For Germany?
Sehr cooles Video .
Passen die Streifen ( bei Amazon in Beschreibung steht 70 und 90 cm) von der Länge her auch , wenn man keinen idrive Monitor hat ?
Danke, wenn man kein Bildschirm hat dann braucht man 2 lange streifen hab aber im netz kein kit gefunden wo 2 lange streifen dabei sind, mein Bruder hat auch ein e91 ohne idrive da haben wir dann nur den einen langen streifen am Armaturenbrett verbaut :)
Für alle die das Problem haben , dass die Streifen zu kurz sind :
Man kann den Händler anschreiben, und kann gegen Aufpreis 110cm lange Streifen aus China liefern lassen.
Hello , on what cables you wired the lights on drivers door and on the dash board? I buyed the exact lights and they are awsome. I have a bmw e90 2005
On the grey/red and brown wire from the window regulator module in the the door
Can you make gradients without animations? Wondering because I dont care about the animations, just thinking if I should save 30 bucks and get the one with solid colors only. But gradinets that dont move would be cool.
No unfortunately not u cant even set two static colors the app isn't really good
Sehr schön 👍 kannst du die streifen auch z.B. in Rot leuchten lassen und trotzdem noch die Farbe der Türen ändern? Also das der Fußraum die Türen und die Streifen alle eine andere Farbe haben ?
Ja das geht
Silly question… 9:39 what do you use to attach the power wire to window regulator switch ?
These ones are the best solution to connect wires
amzn.to/3OwbBoX
Izgleda odlicno. Mozes li postavit link od lampica da Se mogu naruciti ?
Hvala ti pozdrav
Moin, funktioniert die Beleuchtung an den Türen auch wenn nur Standlicht angeschaltet ist anstatt Abblendlicht?
LG
Hello! Where did you eventually connect wires for the doors? I've connected mine as well on window motor, but it's not working properly... Lights won't turn off and they only turn on with a remote. Also, I can no longer long press on my keys to close/open windows. Any suggestions please?
On the lighting for window regulator switch
kann man diese wilkommensanimation am anfang auch deaktivieren?
Hey kannst du mal den link schicken wo du die leds her hast
how did you fix the door handle bulb in the door ?
did you use glue or something like that ?
there is doublesided tape on these lamps i just used this and till now it holds up no issues
Servus, kurze Frage, welche Sicherungsklemme, bzw wo habt ihr das Elternmodul angeschlossen? Sonst gutes Video, danke
Ich glaub bei mir war Sicherung nr 15 frei ansonsten einfach mit dem Multimeter alle freien Sicherungen ab messen und schauen wo Strom anliegt bei Zündung an
What is the app to control the lights I have the same kit but all the instructions are in Chinese?
Also do you power each box individually?
Que aplicación utilizas.
Why does he lay the door panel on the paint like that😭😭
Is there a way to stop the RGB cycle at startup? And have it go to the chosen colour directly?
For that you need to buy rgb version and not this one with effects.
Ye baby like Need For Speed Undergraud 😁
Name of the application for the phone please
Did you buy two kits? Because there are 6 led strips. I think you used 7 in total (3 in front)
I was wondering the same thing
What kind of application do you use, I have a problem with my Super looks, greetings
LAMP&FRGN is the app called
starkes video. denkste das würde auch für den e46 funktionieren?
Ja klar :) fürn e46 wüsste ich gar nur nicht von wo du Stromversorgung nehmen kannst für die vorderen Türen weil der Fensterheber Schalter ist ja in der mittelkonsole
@@garage.86 hmm okay ja müsste ich mal gucken
will this fit for E92 m3 coupe?
I think it should fit
also hast du an den türen den strom von der Beleuchtung von den Fensterheberschalter genommen und in der Mittelkonsole?
Nicht in der mittlelkonsole sondern an den schaltern in den türen selbst ist ein grau rotes kabel das is für die Beleuchtung
@@garage.86meinte mittelkonsole seperat, türverkleidung danke 👍
@@garage.86In der Mittelkonsole wird man ja warscheinlich viele verschiedene möglichkeiten haben, beleuchtung vom warnblinkschalter, DTC schalter, ZV schalter etc.
ja beim warnblinkschalter ist des kabel für die beleuchtung auch grau rot @@I-am-L3g3nD
@@garage.86so i can tap the power from the hazard light switch for my main module?
No USA link?
Würde die Option bestehen das das Licht mit der angeh- Animation direkt an bleibt? Und kommt die Animation auch wenn’s aus geht?
Bei der einschalt Animation kann man leider nichts ändern die app ist auch nicht sonderluch gut gemacht ☹️
Hey hätte ne frage du hast ja 2 streiten am Armaturenbrett oben und unten woher hast du die zweite her ? Ist ja nur ein langes im set dabei und links neben dem Lenkrad fehlt die untere Seite gibt’s da noch ne Möglichkeit?
Grüße
Dem Verkäufer auf amazon schreiben ob er dir noch ne lange leiste schicken kann (110cm) dann schickt er dir die auch noch :)
@@garage.86 danke für die schnelle Antwort
Und was ist mit links unten neben dem Lenkrad?
@@mhamakhan links neben dem Lenkrad hab ich selbst auch nur eine verbaut und zwar unten
you have any idea if it would fit 4 series f32 too?
its a universal kit so it should fit for f series to :)
Do you think the lights would cover the whole length of the dash in a e90 without the Idrive?
With mouth idrive u need 2 long stripes just text the seller and he will send u 2 long stripes
@@garage.86 perfect, thank you.
hey! i have the same 4 door boxes and main module. but now are my lights constantly flashing green and nothing gets synced. how can i solve this?
I dont know what the problem is have u checked power and try to disconnect one by one light strip from the main box maybe data wire is to long
Eine Frage man, wie verbindest du die ganzen Leitungen zusammen wo kommt das eigentlich alles zusammen ?
Gar nicht die einzelnen Module sind alle über Bluetooth verbunden :)
Kannst du zeigen wo und wie du die am Stromnetz angeschlossen hast ?
Die hauptbox einfach am sicherungskasten, mit dem multimeter nach nachgemessen wo Strom ist wenn Zündung an ist und dann dort die Sicherung die im kit dabei ist rein gesteckt und die Tür boxen an der Beleuchtung von fensterheber Schalter. :)
Looks amazing! Soon I will be getting my e60 (first BMW, before I used to own Opel Corsa and then Astra) and it would look just lovely inside! 🤓 Is it hard to do for a begginer or better to get it done in a shop?
Thanks for the positive feedback well its not that hard of a job if u have done already a few DIY Projects u can easily do it ur self i always would try to do it yourself so u learn something new and if u are on a point where u dont know further then u can always ask some friends or people from the internet :)
@@garage.86 gonna give IT a try. First thing planned is changing the monitor for idrive for one with Android and adding a parking camera in the back.
@@salinero04 the next video I’ll upload is about to retro fit a android headunit so stay tuned :)
Did you happen to put any fuses? and at what lights?
I used an empty spot in the fusebox just check before if the is only power when igniton is turned on :)
@@garage.86Can i possible Connect to the interior light fuse and add 5 amps?
Wie habt ihr die Boxen mit dem Host verbunden ? Hab’s eigentlich so wie ihr gemacht vorne gehts ohne Probleme , aber hinten verbinden die sich nicht Bzw leuchten garnicht :(
Also die boxen komunizieren über Bluetooth mit einandern, hast du sie richt an strom angeschlossen ? Strom von der grau roten Leitung am fensterheber schaltung und masse von der braunen ?
Hi, how did you fixed the lights in the dash? Are they glued or pinched?
Just pinched in thy hold up pretty good and an Dashboard i used double sided tape
@@garage.86 thanks. Where did you get the power on the dashboard? Of the air conditioning control panel?
Got it connected. On the plug of the warning light.
Where can I buy this light kit from
Link in the description :)
Wie heißt die App?
Do you have video bmw e60 please my brother
i dont have a e60 where i can put those in but its pretty much the same as in e90
Did you get them off aliexpress? And do you have the 20 in 1?
yes but i cant recommend the kit from ali express the app is really bad also i got 20 in 1 kit so i theoretically have 4 stripes for dash but if u connect all 4 stripes then all the lights are glitching and dont work properly thats why i didnt put the aliexpress link in description the kit of amazon is pretty solid no issues so far :)
@@garage.86 TY for the info
Also ich habs jetzt nicht ganz verstanden habt ihr eine Lösung wegen dem Fehler mit dem Fenstereinklemschutz gefunden? Ansonsten wirklich super Video! Ich werde es demnächst auch machen wenn ich die Zeit finde. :D
Ja, in der Anleitung steht man soll das an der Stromzufuhr vom Fensterheber anklemmen aber das problem ist das der einklemm schutz durch die höhere stromabnahme dann nicht richtig funktioniert, und die Lösung war dan im Endeffekt die tür module an die Beleuchtung vom fensterheber schalter zu klemmen, so leuchten die türen zwar immer von wenn licht angeschaltet ist aber mich störts ehrlich gesagt nicht, das Armaturenbrett leuchtet sobald zündung an ist
:)
@@garage.86 Danke für die Erklärung! Mach ich dann auch so, mich stört es auch nicht. :D
Hey ich hätte noch eine kleine Frage und wäre euch mega dankbar wenn ihr sie mir beantworten könntet. Ihr habt ja vorne drei Led Streifen benutzt. (Fahrer Seite das kürzeste und auf Beifahrer ein langes und ein etwas kürzeres) Wie habt ihr die angeschlossen? Bei meinem host gibt es zwei Kabel eins ist LED Zone und eins ist Foot Zone. Es gibt einen zweier Splitter welches man an die LED Zone anschließen kann damit man zwei LED Streifen anschliessen kann. Es bleibt aber dann trotzdem eins unabgeschlossen. Ich hoffe ich konnte erklären was ich meine und ihr könnt mir damit helfen.
@@SergeantThorn bei uns waren mehrere solche spliter kabel dabei, ich hab auch noch eins übrig wenn du den brauchst kann ich ihn dir evtl sogar zuschicken, müssen nur schauen ob die stecker gleich sind :)
@@garage.86 Oh das wäre wirklich super! Ich wohne auch in München und könnte den Splitter, wenn es passen sollte, eventuell sogar abholen kommen. Ich würde dir dann dafür auch was zahlen. :) Also die Anschlüsse bei mir sind 4 Pin und ich habe genau die gekauft, die du unter dem Video verlinkt hast. :D
Does anyone have the link for the us version
Der link funktioniert leider nicht von welche Marke sind die denn
Grüßt euch, ich hätte da eine frage und hoffe ihr könnt mir weiterhelfen. Ich versuche gerade an der Türe die 12v abzugreifen. Nach meiner Messung habe ich an den fensterschalter nur 5V anliegen. Dürfte ich fragen woher ihr für die türen die 12v her habt ?
Check mal ob die dimmung der Innenraum Beleuchtung ganz runter geregelt ist dann geht da auch die Spannung runter :) am blinker hebel kann man das einstellen
@@garage.86 entweder bin ich gerade zu blöd die beleuchten über den blinkerschalter zu bedienen oder ich hab keins😅 aber warum sollte an dem Fensterheber die spannung von 5v auf 12v steigen wenn ich daran ändere ?
@@Ultramonsterbook wenn du mir schnell auf insta schreibst kann ich dir ein video schicken wie dad funktioniert :)
Alen_garage86
What do i need if i would like to only fit the dashboard strip?
U would need just the main box with two or 3 light strips :) but iam not sure if there is such a smal kit for sale
What is the name apps for ios?
You can’t choose 2 colors you want to put together ?
no unfortunately not
Hello I hope I’m not too late, how did you conn rear foot light ? 🥲
The rear door power off after you drive for a bit. Any solution?
maybe the brightness for the cluster light is to low so the voltage drops below the working range for the LED ambientlight otherwise idk
könnt ihr vllt sagen wo genau ihr es am sicherungskasten angeklemmt habt ?
He said on his Car he found a empty fuse and tested with multimeter(fuse 15) Im just curious about Where he grounded the connection 😅
Can you help me how I can find such set for e91 on aliexpress ?
a.aliexpress.com/_mLk6Jdi
In Germany we say, "Das wird Stillgelegt"
Can you dim them?
Yeah sure u can dim them in the application or with the hardwired buttons :)
Were you bay the kit light???
Links in the description
App name
which bmw styling wheels are that ?
style 132 from x5
where can you buy them? the link thanks 🙏
link is in the discription :)
Please tell me where I can order it.Thanks a lot
Check description
Is there a link for American? Sorry I would discover it myself Im just so so tired
I haven't looked it up for america i will later
@@garage.86 Thank You! Really Im just so so tired
Anyone know if theres something like this for a 5 series E39?
it will fit basically on any car cause u can cut the lights to your length
Where did you connect the door lights into which wire?
For the doors u only need to connect the box to power, we used the window regulator switch the brown and grey red wire these are for lighting up the switch at night
@@garage.86 so the red grey wire on mine is on still after the power drls are turned off.. there is two brown wires too
@@garage.86 on my harness, I have a red with a gray strip, brown wire, a white wire with a brown strip, a red wire with a yellow strip, a yellow wire, and another brown wire. Total 6 wires on my harness.
is the light always moving ??
No there is a few modes that u can set with moving but also with static light :)
@@garage.86 ok thx
10:20 Was war denn da los bro 😂
U can turn them off right?
yea u can turn them off in the app
@@garage.86 i might get them