This was God sent i swear my dispenser haven't been working for days having been thinking how will have to buy new one i saw this video and this exactly what i needed to do oooh thank you so much
Yayyyyyy!!!! I am so happy!!!! Thank you!!!! I've been so frustrated with my water dispenser, it functional for a short time and missed to save the receipt to claim to the store.... and then I found your video!! Thank you!! I make it work!!! You made my day! Thank you!
Thank you for your video! It didnt work but i was able to rule the hose connection out. I opened it up and found out that my water reservoir water was a block of ice because of the cooler was on all the time. Turn it off for at least 4 hours to thaw... Trying to find the next solution to fix the cooler temperature
thank you i think my pump wasn’t plugged in or something. but now i can hear the motor. i plugged it in let it sit for a few hours then came back and the red light was flashing. idk why. but it would kick on and off if i press the button behind the door. thank you for this video for me in there and checked out all the connections. seems to be running now. i’ll wait for tomorrow morning to follow up.
have you found this one to be louder than the top loaders? I just got this model to replace the one we're renting from crystal springs but some people say it's loud due to the pump
Thank you so much po for coming hear and watching. Simple lng minsan mgtrouble shoot. Sayang naman kasi. Glad naayos ni hubby at nkasave kmi. Thanks po again at ingat palagi:)
Hello po. Thanks po for visiting and watching. Glad you find it informative at hope mkatulog in the future. Nice to meet you po and pls stay connected:)
my bottom loading dispenser low water indicator always blinking even I just change to a full one, do you know any fix for that error/issue? appreciate any kind of help a lot. thanks.
Maybe the sensor itself is malfuctioning. Or try to check the hose and probes if they are loose ( tighten if they are coz sometimes that will cause it to blink). Check door switch as well and make sure you push it close ( if not fully closed, it also cause the primo to blink). Hope this helps.
I don’t know how you pulled out the hose. I took off the clip and it still the hose is locked inside still I keep pulling but feels like I’m gonna break the plastic
My was doing the same and after teying this it still wouldnt work. Almost broke down and bought another but then i saw people were also having issues with frozed reservoirs. Sure enough, mine was frozed solid. Working and flowing like normal now.
Uhhhh mine is getting hot on the outside and I can’t find any articles about how to fix it and if it’s ok so I’m putting it here to hopefully find some answers.
Sorry for the late reply, just saw your message. I am not really sure what the problem is, but most likely the motor/pump is overheating, if it is still under warranty, i would return it because of possible fire hazard. Sorry i'm not of big help. Thanks for watching.
There is no blue tab on the hose connecting to the probe. The hot water works & I know the pump is working because I drained all the hot water until the bottle replace light came on then I stuck the probe back in the water jug & it began filling the reservoir. But still nothing coming out of the cold water dispenser
The blue tab secures the hose to the probe. Try to check the faucet if it is not clogged. If not, you have to open the machine and check the cold water line. Hope that this will help with your problem . Thank you so much.
There’s a small white button on the top left corner that makes it draw water when you close the door push that button and it should begin to draw water if it doesn’t follow his steps
Ok. But has anyone figured out why the water doesn’t come out for the hot water. I have a smart touch and the cold and room temperature works fine but for the hot water no water comes out at all.
This is my second Keurig Coffee Brewer. ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first one lasted 6 years. It worked beautifully until the day it didn't. It was hard to go back to the drip coffee for a couple of days while I waited on my Keurig to get here. There is a huge difference in the taste. Keurig makes a really good cup of coffee. This new one is a little different from my old one. I find putting the water filter in was easier than on the old one. Attaching the water reservoir was also a little different but once I figured it out, it too was easier. This new one has the auto off feature but is not programmable like the old one. Only three cup sizes instead of four. The odd thing for me was how much lighter in weight this one is compared to my old one. More plastic and much less metal in the construction of this one. The price is so much less than the original Keurig that I bought and the coffee tastes the same so all in all I am satisfied.
I unplugged min for a whole day it froze no one in primo helped me its a hard company to get help from if your water doesn't flow or punp hot or cold water its frozen just unplug it
I go to you tube for anything I need to know or fix this channel is so awesome don't know what I'd do without you tube
This was God sent i swear my dispenser haven't been working for days having been thinking how will have to buy new one i saw this video and this exactly what i needed to do oooh thank you so much
Thank you so much! I was like, “noo, I don’t want to buy a new one” but it was just the pump got loose 😅🤣 easy fix
Thank You very much for this video... it was a loose hose connected to compressor! GOD Bless You for this video 🙏🏼 Much LOVE
1:50 1:50 1:50
Yayyyyyy!!!! I am so happy!!!! Thank you!!!! I've been so frustrated with my water dispenser, it functional for a short time and missed to save the receipt to claim to the store.... and then I found your video!! Thank you!! I make it work!!! You made my day! Thank you!
Yay! So glad it helped!😊 Thanks for watching.
thanks brother! it worked , just followed all the steps, problem was at the other end of the tube
New technology of water dispenser, wow I like that thanks for the tips on how to troubleshoot, keep it up.
Galing naman maghanap ng sira ni lods..keep going po..super helpful din na vids..
THANK YOU! This fixed the problem, I thought the pump went out.
You're welcome! I'm glad you found this video useful. Thank you so much for watching!
Thank you. Used this to fix mine. My wife just wanted to go buy a new one. So awesome!
So glad it helped😊. Thanks for watching!
Yooooooo.. I was about to throw my cooler out!!! Thank God I decided to come to youtube 1st!!! Now it's working!!!!! Thank you for the vid 😊
Glad I could help
And if it's connected properly what's the next step?
Thank you sooooo damn much!!!!! Better than the primo troubleshooting!
Was about to replace the pump, thanks for the video.
Glad it was helpful! Thanks for watching😊
Thanks for sharing! Youre a lifesaver
I didn't buy one yet, but something tells me this is good to know.. thanks
Thanks for watching:)
Cool tutorial on how to fix a water dispenser. Keep up the good work and more success to your channel!
Thank you so much po for watching!:)
Thank man! You saved the day!
This totally worked! Thank you :)
Ang galing naman. Sana makabili din ako niyan. Keep on uploading po.
Maraming salamat po! Hopefully po. It's a very neat appliance:)
Life saver! My son bought mine for Christmas a year ago and it made him upset it was not working for me anymore. He will be so happy.
So glad it's fix! Thanks for watching:)
Just when I was ready to toss mine out I see this try it and sure enough it’s good and running ty definitely hit the like and sub button c;
Excellent video thanks
Thank you for your video! It didnt work but i was able to rule the hose connection out. I opened it up and found out that my water reservoir water was a block of ice because of the cooler was on all the time. Turn it off for at least 4 hours to thaw... Trying to find the next solution to fix the cooler temperature
Thank you so much for your video I almost broke my water dispenser lol
Glad it's helpful! Thanks for watching:)
Nice one! Thanks for sharing ❤️
Thanks so much po for watching!:)
Thanks. Finally found the solution 😫Brand new primo but I had trouble with it🙄
Glad it was helpful😊
Thank you , that was the problem with mine 😊
It is an useful information. Thanks.
Thank you po. Glad it's helpful:)
Wow ang galing thank you sa pag share
Boom! Fixed. Thanks!
You just saved me dude, thank you!
Glad I could help!
Thank you for the info!!
Thanks for watching!😊
great, that's very informative for us.
Thank you so much for watching!:) Glad you find it helpful!:)
thanks helped alot!
Imma try this. Thanks for the vid!!
I hope it helps you😊
Wow thanks for this very informative
thank you po:)
Thx...I’m the hero now. 👍🏽👍🏽👍🏽👍🏽
It is a good thing that you know how to trouble shoot it. by the way a new friend hope to see you back. good day
Hi Nancy, salamat sa you tube, na DIY kung ayusin itong dispenser namin hehe. Yes daan ako.Thank you so much for watching:)
Ang informative nito. Salamat sa pagshare
Marami pong salamat for watching. Glad it's helpful for you. Ingat po palagi:)
This is amazing thanks for sharing
Thank you so much for watching. Glad you find it helpful:) Take care always:)
what if that dont work??
It worked! Thanks
thank you i think my pump wasn’t plugged in or something. but now i can hear the motor.
i plugged it in let it sit for a few hours then came back and the red light was flashing. idk why. but it would kick on and off if i press the button behind the door. thank you for this video for me in there and checked out all the connections. seems to be running now. i’ll wait for tomorrow morning to follow up.
Thank you so much for watching! I'm glad that you found this video helpful.
hey so my pump doesn’t even kicks on and j checked the connections. idk what it could be. maybe burnt out or something
Hi, done watching Lam na lods, waiting po ako.
Thank you so much for watching! Appreciate it po!:)
Thanks for sharing...I'm here sending back your kindness..God bless you
Thank you so much po for watching!
have you found this one to be louder than the top loaders? I just got this model to replace the one we're renting from crystal springs but some people say it's loud due to the pump
It occassionally makes sound (very brief) when pumping water but not noisy at all. We love it. Thanks for watching:)
Nice video thanks for sharing 😍
Thanks a lot Nadia!😊
Thanks you help fix my water cooler thlught I was going to have to buy a new
Glad it helped you. That's money savings right there:) Thanks for watching:)
Thats amazing,sana meron yan dito nice talga safe and net tingnan.Keep safe
Thank you thank you po for watching:)
PSM in the house. Simula na po ako sa lahat ng sine mo madam.
Thank you PSM. Yay! Na excite naman ako!😊 Thank you so much:)
Thanks for the loud music so I’m not able to hear what it’s doing to see if it matches mine.
Thank you 😅 all good now👍
Ang ganda nito thank you for sharing po
Thank you so much for watching! Glad na nagustuhan mo:)
cool impressive thanks for sharing
Thanks a lot po for watching. Ingat po palagi:)
Nice vlog. Thanks my new friend. Stay connected. Full support
Thank you so much for watching!😊 And thanks a lot for your support!:)
Wow naman thanks for sharing idol
Thank you so much for watching!:) Hope it's helpful!:)
great job
Thank you po for watching! Nasira dispenser namin so ngka content tuloy kmi😅
Nice home garden
Thank you so much for watching!:)
Great video.thanks for sharing.God bless.dikit na kita
Thank you so much po for visiting and watching. Salamat sa support:)
Were did you get the stainless steel probe? Mine came with a plastic one.
It already comes with the dispenser when we bought it. We got ours at Costco around 4 years ago:)
@@HomeGardenNature Cool, mine came with a plastic tube. Will do my Googles to see if I can order one.
Tried to do that, I know the pump is working but not pumping water? Please help
Galing mo po gnyan pla pag auz, ncra un sa ofc hindi na ngamit hinayaan na lng..new friend here#Mom in Oman
Thank you so much po for coming hear and watching. Simple lng minsan mgtrouble shoot. Sayang naman kasi. Glad naayos ni hubby at nkasave kmi. Thanks po again at ingat palagi:)
That is a good share
Thank you so much po for watching! Biglang nasira so hubby fixed it. Ngka content kami tuloy hehe.
woow thanks for the info may dispenser din ako muntikan na masira
Hello po. Thanks po for visiting and watching. Glad you find it informative at hope mkatulog in the future. Nice to meet you po and pls stay connected:)
my bottom loading dispenser low water indicator always blinking even I just change to a full one, do you know any fix for that error/issue? appreciate any kind of help a lot. thanks.
Maybe the sensor itself is malfuctioning. Or try to check the hose and probes if they are loose ( tighten if they are coz sometimes that will cause it to blink). Check door switch as well and make sure you push it close ( if not fully closed, it also cause the primo to blink). Hope this helps.
good Job po very informative GOD bless po #Obra Maestro
Thank you so much po! Glad you find it helpful!:)
What of it IS drawing water from the white tube but not the probe? Why would that happen?
The probe is not properly connected to the white tube. It's suctioning air instead of water.
Ganyan din gamit dito ,mas ok kasi tulak nlng hindi kilngan iangat tulad ng iba thanks for sharing
Korek po at mas convenient sya kasi no need to lift. Thanks po for visiting and watching. Ingat po palagi.
I don’t know how you pulled out the hose. I took off the clip and it still the hose is locked inside still I keep pulling but feels like I’m gonna break the plastic
Maybe try to use heat gun or hair dryer just to loosen the hose. Thanks for watching!
My was doing the same and after teying this it still wouldnt work. Almost broke down and bought another but then i saw people were also having issues with frozed reservoirs. Sure enough, mine was frozed solid. Working and flowing like normal now.
How did you resolve the issue? Just disconnected it for a few hours? Thank you
I'm having trouble removing the hose from the probe it's stuck
Wow galing nmn maka bili nga nya idol piro mahal ata wla kami g pambili hahhahaha
hahah, makakabili ka din yan, esp na moni ka na haha. Nice to meet you at congrats uli. Salamat for watching:)
I like this water dispenser.Yong sa amin ang water container sits on top .Ito mas maganda kasi nakatago.
Hi po! Yan pinili nami para mas accessible, you don't have to lift the gallon, slide under na lng. Thanks po for watching!😊
Uhhhh mine is getting hot on the outside and I can’t find any articles about how to fix it and if it’s ok so I’m putting it here to hopefully find some answers.
Sorry for the late reply, just saw your message. I am not really sure what the problem is, but most likely the motor/pump is overheating, if it is still under warranty, i would return it because of possible fire hazard. Sorry i'm not of big help. Thanks for watching.
Thank you, that’s ok. It turns out that it was only hot because it was pretty hot outside that day. Luckily everything’s fine.
Glad to know that😊
Wow Ang ganda Naman Ng water dispenser
hehehe, thank you po. Very functional sya at nasa ilalim ang dispenser so wala ng buhat buhat.
Thanks a lot for watching:)
There is no blue tab on the hose connecting to the probe. The hot water works & I know the pump is working because I drained all the hot water until the bottle replace light came on then I stuck the probe back in the water jug & it began filling the reservoir. But still nothing coming out of the cold water dispenser
The blue tab secures the hose to the probe. Try to check the faucet if it is not clogged. If not, you have to open the machine and check the cold water line. Hope that this will help with your problem . Thank you so much.
Still trying to figure out why mine ain't drawing water after a few years. I just hear the motor running its mouth.
My hose won’t disconnect, my issue is the blue button is locked . Does anyone know why or what I should do?
How do you get it to draw water without turning on the dispenser? Am I missing something here?
There’s a small white button on the top left corner that makes it draw water when you close the door push that button and it should begin to draw water if it doesn’t follow his steps
Ok. But has anyone figured out why the water doesn’t come out for the hot water. I have a smart touch and the cold and room temperature works fine but for the hot water no water comes out at all.
thank you for sharing , very interesting , be bless
Thanks po for checking here:) Take care always:)
This did not help my situation. I have this same dispenser but in my case cold water doesn't come out but hot water does. How do I fix this issue?
Having the same problem.
I still have trouble pumping water? I did all the steps you did. Anyone else having the same issue?
Ya same did you figure it out?
Tried this. Still not working. The pump makes noise but does not make suction. Anyone got any ideas?
Inunahan na kita kaibigan... kaw na bhala sa akin... be blesss
Maraming salamat po for watching!😊
Tried this. Reconnected and still nothing 😞 any further suggestions?
Try to check if the pump is working. You can hear and feel it when it is pumping.
What if only the cold water doesn't dispense and hot water does?
Good question why !!
maganda d kaya dti buhatin mo pa tnx s demo
Opo, mas accessible sya. Thank you for watching:)
This is my second Keurig Coffee Brewer. ua-cam.com/users/postUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first one lasted 6 years. It worked beautifully until the day it didn't. It was hard to go back to the drip coffee for a couple of days while I waited on my Keurig to get here. There is a huge difference in the taste. Keurig makes a really good cup of coffee. This new one is a little different from my old one. I find putting the water filter in was easier than on the old one. Attaching the water reservoir was also a little different but once I figured it out, it too was easier. This new one has the auto off feature but is not programmable like the old one. Only three cup sizes instead of four. The odd thing for me was how much lighter in weight this one is compared to my old one. More plastic and much less metal in the construction of this one. The price is so much less than the original Keurig that I bought and the coffee tastes the same so all in all I am satisfied.
Very simple design and functional. Thank you so much for watching!
I unplugged min for a whole day it froze no one in primo helped me its a hard company to get help from if your water doesn't flow or punp hot or cold water its frozen just unplug it
the dispenser is very good
Thank you so much for watching:)
huhu I need to learn that
Thanks Bea for watching!😊
Ganda NG water dispenser nyo nasa baba ang gallon
Thank you Amira, mas madali pagnasa baba para wala ng buhat buhat. Thanks for dropping by:)
Cold water only not despencing
hytic natalaga mga gamit ngayon,,
hehe, basic dispenser lng ko kasi mas magasto kung bottled water. Thanks po for watching:)
This didn’t work for me
this is a good show very informative thank you so much dear jopet #manilavine
Thank you so much for watching. Glad you find it informative:)
ang ganda ng tobig
Thank you po for watching!:)
Fuck primo, walmart wont return mine and its brokwn