Excelente explicação, além de falar calmamente assim a tradução em legenda ser bem entendida. No Brasil há poucos técnicos que compartilham seu conhecimento e os que compartilham não explica tão bem.❤❤❤
Idrees Bhai I've been following you since very long your doing such a good job really appreciate it, Sir I'm having an issue my ps4 fat since last week that it keeps blinking blue light and showing no signal on tv i had sent it to repair center in Karachi but they couldn't fix it i think they only work on low level repairing like service could you fix mine please? Will be happy seeing your reply
MR.IDREES i ha e a ? I HAVE A ps3 slim it doesnt want to update it shows an error code allready change hard drive an its still show an error code 8002F1F9 update erro dk yu know which part of tbe mother board is giving dat problem so I can change the part my self.?
In PS4 pro models, the syscon volts should be low. You can install an additional regulator to limit volts down to 2.8 volts. Otherwise, the Teensy++ may cause the process to hang in the middle, especially during the write process.
Is it possible to have piggyback two syscons and two bios chips and give them power switch between them (and ofc putting two diffrent hdds) to run on diffrent firmwares? I mean one HDD bios and syscon on 9.00 and other on latest firmware?
First of all check the wiring between your Teensy and the SYSCON chip, if it still doesn't read well, use the Teensy Four, it works fine for all models.
by the way I broke the pin. I tried to trace it but now even the PS4 doesn't. maybe I damaged the syscon. my resistor is 100 ohm 3w could it be the problem
It sounds like you're dealing with a tricky situation. Breaking a pin while trying to trace it could indeed cause issues with the system, especially if it involves the syscon (System Controller), which manages power and system functions in the PS4. Please make sure to inspect the pin for repairs. If you haven't already, please try resoldering the broken pin or bridging the trace using a small wire to ensure a proper connection. You can also grind some area around the broken pin for a better connection.
Thanks so much. I got 150ohm resistor. I managed to dump the syscon now I'm waiting to get another syscon chip such that I can swap them. thank you very much
Fantastic analysis of syscon chip. Hats off to you, Sir.
Thanks and welcome
This video is a big help for the community ❤
Glad it helped!
@@idreestech
I like collecting information everywhere
And tiil now the cost of downgrading is so expensive 😢
Excelente explicação, além de falar calmamente assim a tradução em legenda ser bem entendida.
No Brasil há poucos técnicos que compartilham seu conhecimento e os que compartilham não explica tão bem.❤❤❤
❤️🤗❤️
Thank you for sharing. You always solder without microscope and that takes some doing.
Always!
Always waiting your video...pls posted on regularly basis
I will try my best
Wating for ps3 video idrees bhai❤
Soon dear.
@@idreestech 😇
شكرا لك دائما أنت متميز تحيه لك من مصر ❤❤❤ لكن أين أجد البرامج هذه
Links are in discription.
Can u do a video about reverting with this tool?
Maybe sometime.
Cool.Can this tool make a downgrade?
Yes.
very good
Thank you! Cheers!
Ps3 k regarding se baat karni
Thanx master ❤️🇹🇷
I was asking a ? An he dudnt respond bck to me about the ps3 slum update error code how to fix it oh men.hmm.
good job
Thank you! Cheers!
Idrees Bhai I've been following you since very long your doing such a good job really appreciate it,
Sir I'm having an issue my ps4 fat since last week that it keeps blinking blue light and showing no signal on tv i had sent it to repair center in Karachi but they couldn't fix it i think they only work on low level repairing like service could you fix mine please? Will be happy seeing your reply
Of course, I can give it a try to fix it.
Pls my ps3 slim cech 2100A have trophy problem am do update it show error 8002f147 pls me fix
ua-cam.com/video/w6a7skOfWD0/v-deo.html
Bro 9.03 ko 9.00 me downgrte karana chata hu shi rhy gya ya nhi plis helpme bro
You should try it anyway.
تحيه من مصر ومجهود جيد نحن نتعلم منك الكثير فعلا
ما اسم البرامج المستخدمه لم اجدها فى الوصف
Try searching "Ps4 tool dowgrader"
Assalamu alaikum sir kayse hain
Fine, TY!
Link for bay it plz
www.pjrc.com/store/teensy40.html
is it possible to downgrade without the original hard drive?
Sure, yes.
MR.IDREES i ha e a ? I HAVE A ps3 slim it doesnt want to update it shows an error code allready change hard drive an its still show an error code 8002F1F9 update erro dk yu know which part of tbe mother board is giving dat problem so I can change the part my self.?
check the voltages near the network chip or change the network chip
Bad bluetooth/WiFi card - this is easy to replace.
Bad nor chip - this requires soldering.
Bad Hard drive - this is easy to replace.
Is it possible to swap NOR too
Yes, but the software should be its original that will be rewritten into the new chip.
does all ps4 pro support this syscon glitch?
In PS4 pro models, the syscon volts should be low. You can install an additional regulator to limit volts down to 2.8 volts. Otherwise, the Teensy++ may cause the process to hang in the middle, especially during the write process.
I'm sorry. But why you removed the chip?
Kindly ensure that you watch the entire video.
@@idreestech yeah i was in a hurry
After writing full dump syscon for ps4 pro , cant power on , any solution
Were both of the dumps identical?
If yes, the Syscon chip you are writing in could itself bad.
Hello, Can I ask which temp and air flow values did you use on the hot gun to desolder the syscon from the motherboard?
Usually, it is 380 degrees and airflow should be at medium level.
@@idreestech Thank you sir :)
Can you buy a new syscon chip from Renesas or does it have to be from another ps4?
I have identical backups of NOR and Syscon.
You can buy a new one to flash the back up into it.
Is it possible to have piggyback two syscons and two bios chips and give them power switch between them (and ofc putting two diffrent hdds) to run on diffrent firmwares?
I mean one HDD bios and syscon on 9.00 and other on latest firmware?
Never tried it. But not possible as the SYSCON with different versions patches the NOR.
Can you use tenssy 2.0 Or should we use tenssy 2++
Teensy++2 is fine. But it is better to use Teensy 4, especially for Slim and Pro models.
@@idreestech Please, is there a way to connect Tenssy 2.0 to a keyboard?
If you can find or make its keyboard .hex or .bin file then of course you can connect it to a keyboard.
Arduino is also an option.
i always get error entering debug mode
First of all check the wiring between your Teensy and the SYSCON chip, if it still doesn't read well, use the Teensy Four, it works fine for all models.
by the way I broke the pin. I tried to trace it but now even the PS4 doesn't. maybe I damaged the syscon.
my resistor is 100 ohm 3w could it be the problem
It sounds like you're dealing with a tricky situation. Breaking a pin while trying to trace it could indeed cause issues with the system, especially if it involves the syscon (System Controller), which manages power and system functions in the PS4.
Please make sure to inspect the pin for repairs. If you haven't already, please try resoldering the broken pin or bridging the trace using a small wire to ensure a proper connection. You can also grind some area around the broken pin for a better connection.
You can use the resistance at 100 to 200 Ohms. 180 Ohmes is a good choice. By the way, watts do not matter.
Thanks so much. I got 150ohm resistor. I managed to dump the syscon now I'm waiting to get another syscon chip such that I can swap them. thank you very much
Is it possible to use Raspberry Pi Pico instead of Teensy?
Maybe, but I never used it.
Hi pro
I want to ask you when I haven't ps4 syscon chip can I find it on ps3 or ps 2 or other device
Really I have dead Syscon ps4 fat touch help plz
And how I can program it
No.
Bhai aapki video acchi lagi lekin samajh Nahin Aaya thoda Hindi mein bnao na bhai 😍😃🙄
Google can translate it into Hindi. Use the CC option in the video.