How to replace VTEC Gasket and Spool Valve Filter on a Honda Element 2003-2011
Вставка
- Опубліковано 19 гру 2022
- In this video, we will be replacing the VTEC Gasket and the Spool Valve Filter on a 2005 Honda Element.
Product link:
amzn.to/3y0nwGJ - Навчання та стиль
I just followed this to change the front one, daes work. All procedure is accurate. Really appreciate the video maker.
I’m glad it helped you out ! Consider subscribing!
7 days passed ， no leaking at all, problem solved ten nice car again, really appreciate the video maker. Small suggestion, need electric wrench or 1/4 or 3/8 ratchet, or 1/2 short handle ratchet, Japanese car is good at using space
I had a garage do this job for me a few years back. Too much digging deep for me. My hats off to you for being able to get that serpentine belt off with 2 wrenches ! When I replaced mine, I needed a like an 18” breaker bar.
Yea it’s not that bad of a job. Just little by little. Step by step. A shop will probably charge you a couple hundred to fix it
EXCELLENT! Just what I needed. Thank you!
Glad it helped! Consider subscribing!
Excellent job 👍👍 Btw I am your new subscriber. Thanks for sharing your knowledge, experience and expertise.
Thank you and thank you for subscribing
Thanks for the video brother. Good job on the repair. Hopefully doing this will stop my oil leak on the passenger side. 👍
Thanks. There is one on the side of the engine block as well with an electrical quick connect on it
@Mend and Make yes I know exactly the one you're talking about. Luckily I can tell mine is not leaking oil. ✌️
Put a little dab of RTV on two sides of that pulley nut. Won’t have to worry about it falling out when reinstalling the bolt.
Will do.
Thanks! This is exactly the problem with my CRV. There seems to be a lot less space in the CRV though.
Glad it helped you out!
Consider subscribing. I have all the suspension work on vids
The ABS MODULE is in the way on the 3rd gen crvs
Good content thanks very helpfull
I appreciate that Aaron glad it helped you out!
Muchas gracias amigo!!!! Bendiciones 🙏 y saludos....
I’m glad it helped you out!
Great video 👍🏾👍🏾👍🏾
Thanks consider subscribing
Thanks for Sharing. Do I need to drain oil engine before replacing them? Great and easy to follow tutorial!
No not at all you can just put a small rag underneath the front filter and a small oil pan for the back one. Very small amount of oil comes out
Consider subscribing I have a lot of money saving videos plus I’m working on a water heater fix right now. Video should be posted in a few days
Appreciate it! Thank You
Glad you like it Mr Conduct! Thanks for watching. Consider subscribing
@@MendandMake Done! I was leaking a little over there, easy job when ya know what to do lol Thanks
Genius
These are easy fixes. Don’t take this stuff to the dealer. Consider subscribing for more fix it vids!
No need to drain the oil before replacing right? I think it will all be in the sump?
👍👍👍👍
😊😊😊😊👍👍👍👍 excellent
Glad you liked it
There’s a gasket on top of that variable spool filter that also is prone to leaking
I got the one one the side of the engine. Don’t see one on top. Got the one in the back done
Great job. Did any oil leak onto the belt or alternator before the fix?
I’m sure a little dripped on it
It’s completely dry now. Easy cheap fix. Cost about 10 bucks
Good video
What the torque setting on the bolt.
I mentioned the torque while bolting them down and the conversion
I’m gonna do this for my 2006 crv. Is this the same setup? I already changed the solenoid
I’m not sure if it’s the same set up but I heard a lot of the parts are the same
Question: how can I know if I need to change the vtec gasket.
Thank you for sharing the video, great visual.
Greetings from Texas
This gasket is known to harden and flatten out about every 7 or 8 years. Also keep in mind, the front one is a screen so it is just best to change it out too to keep it clean.
Hello to you from San Antonio!
If it's flat or split, replace it. Also, don't over tighten the bolts because doing that can split the gasket and you'll have to start all over.
@xMrBlack yea and torque to specs
This change applies to a 2009 Honda accord too? It’s all the same set up? I see the years from 2003-11
A lot of the parts are the same for these Hondas. Sometimes it’s the same parts but are in different arrangements
My local Honda dealer charged $150 not to find a leak in that gasket. Then they wanted $313 to replace screen.
Lol that’s a rip. It takes about an hour for the whole job if that.
Is it necessary to remove the power steering assembly to access the spool valve gasket? It looks like you can remove the top bolt first with a regular wrench and then flip the cover down and remove the bottom bolt? Has anyone tried this?
It’s just two bolts. It takes 1 minute to remove it and you don’t have to disconnect the lines
Just bought an 06 element and found this in the glove box. Solenoid doesn't seem to be leaking but I do suspect a vacuum leak. Do you think it could come from there without having oil drip out?
Or should I look elsewhere?
Run your codes at autozone first
@@MendandMake I have an OBD reader but no codes are showing up. No check engine light. Idling when cold drops very low and then surges back up every few dozen seconds or so.
@@alecksluciferis4188 that sounds like a vacuum leak but you know just jack around with it. I’m a horrible when it comes to fixing cars. I replace 4 things before it’s fixed but then again I have four new parts on the car.
@@MendandMake haha I'm the same! I noticed some of the hose clamps were very soft and loose when changing the air filter. Might change those and see where it leads. Otherwise I'll change the vtech filter since I have one anyway.
Thanks for the clear video!
It’s an easy fix you got it
How are those dorman gaskets compared to oem honda?
Same fit
How long did it take you to make the change?
Both about an hour and a half.
From reading about this job they say to use hondabond to seal this part and to wait up to 36 hrs to dry and set. Did you skip this step or just not show it?
Marketing right? Honda bond I didn’t do that. I’ve had this car and have 350,000 miles on it. I’ve only had to change these gaskets twice so I guess they seal well without hondabond
No marketing had a shop tell me this along with crankshaft seal need to be replaced. They told me 2 days because the silicone needs to dry
That doesn’t have anything to do with the v-tech right?
It’s good news your telling me this. I’ll look into it. But I haven’t heard about that bond.
I’m not the best with the names of parts but the first part you change in this video the gasket with the circle and only one square is the supposed leak on my 05 And was told by the shop it takes a day to seal so I went looking for answers. Your video is the only one I can find changing this part. But there are written chats on Reddit stating rtv leeks because Honda for some reason wants hands formulated product ( which does seem sus) I’ll give it a go this weekend with out bond and I’ll let you know. Next is the crank seal you got a vid on that? ;)
What camera did u use for video a go pro
iPhone 8+ for everything
What are symptoms to know that we need to replace that? Thanks
Honestly I replaced mine when I saw oil running down the back of my motor and oil running down the front and getting all over my alternator. These seals dry up and get hard and loose their puffiness and then lose the seal after about 6 years
@Mend and Make thanks for reply. Do you know if that would effect the way it runs, like would stall if clogged. We got p1009 and vsa code, replaced solenoid and pressure switch and still comes up.
Make sure your quick connect is secure. You can have a intermittent cut off while driving. Be sure to replace both filters because the sludge in the spool valve can cause those problems
@@juniorog7080did you ever fix the p1009 code? I got a 2012 accord se and I have the p1009 code, I’ve changed the cam shaft position sensor, and still have the problem.
@TR1CKSHOTS31 Yes. But ours was for Honda CRV. We end up bringing to dealer, they cleaned out oil in intake tube, cleaned throttle body, performed idle relearn procedure. It also had a service bulletin, look up SB-08-089 and did a software update. After all that it has been running great since. Done this in February 2023. Good luck
I have a question, i got three gaskets front rear and one small ring where can i fit the small one ?
So many things I could say with this question but you should have two. One with a screen and the other does nit
How big is the smallest ring
that should be for the pressure sensor on the vtech solenoid. on of the electrical plugs can be taken off and there is an o ring gasket there. Theres a few other videos showing it.
do you need to drain the oil to take the part off?
No not at all but keep in mind it is best to drain the oil so you have new clean oil being filtered through the new screen
Consider subscribing for more fixes that will save you hundreds of dollars
I just replaced the tensioner, and alternator on an 05 Element and the belt . Going back together, got everything done and can't get the belt to act right. As the belt was broken and off the car when I got it, i can't figure out the diagram. Ive tried a diagram that i saw on UA-cam and it still not close. Can you tell me what the heck im missing? Ive been fooling around with this for 4 hrs and ran across your video and you seem to know what you're doing. Can you send me a diagram?
i.ytimg.com/vi/7WeV8YFkCEU/hqdefault.jpg
i have a little rattle on my k24 head on the passenger side, i thing maybe is a VTC actuator, but can the gasket Could it be clogged and lower the oil pressure?
I changed mine because of oil leak. Are you getting that intermittent knock at about 60 MPH? If so make sure wiring quick connect is on tight. If that doesn’t fix it replace it.
Plus… nothing more satisfying than having 4 new parts on your car before it’s fixed. Wink
It is a sound like a diesel engine after 15 minutes of driving, idling and at low rpm. When I accelerate above 2000 rpm it is as if the oil pressure rises and the noise is eliminated (my car does reach high rpm and high speeds without problem) I suspect that it may be a VTEC gasket or timing chain
@reydavidmejiaalvarez3082 just pay the dealer for a diagnostic. Then if it’s easy try to fix it. I don’t know. Lol
@@MendandMakei live in mexico a i don´t have access to a professional builder bro :(
What was your symptoms? CEL or leak?
Leak all down the side of the block. It’s dry now:)
Plus oil all down in the alternator
Do I drain the engine of oil before doing this?
Not all all
Most of your oil is sitting way below this level. Just as I took it off, that’s how much oil you will see. I hope this video helps you out Casey. Merry Christmas!
@@MendandMake Merry Christmas to you! I did it today and the leak was fixed! Way beyond my skill level, but God helped me. Thank you!
@@caseysimmons9578 you got this!
A little cleaning goes a long way. If u clean up the back side of the serpentine tensioner &the idler bolt; u will find that RTV will hold it in place easily making reassembly a breeze.
Where r your fender covers soldier?
I would've powered the entire engine bay area b4 starting this job. I hate putting gloves on these paws &I prefer 2stay as clean as possible. What a primidone aye?!
BTW, gentlemen w/your skill set should have a serpentine belt tool. Put it on your gift list.
I hate 2c a good tech struggle unnecessarily. Take it from this old NIASE Master Tech. u r better of w/the best tools.
HINT: I like 2use ever so little HONDABOND sealant on those matching machined surfaces 2deter future leakage even though HONDA doesn't call 4it.
Lol
Good tip