Umarex Colt Peacemaker SAA .45 (Co2 BB) (Range Time) by RACKNLOAD
Вставка
- Опубліковано 14 лип 2015
- Like the channel? Help support it here- paypal.me/racknload?locale.x=... Just a pre-review video of the Colt Peacemaker SAA .45 BB version from Umarex. A gun that you will find hard to put down! Pure 'plinking' fun!
DISCLAIMER - Our videos are strictly for documentary, educational and entertainment purposes. Imitation or the use of any acts depicted in these videos is entirely at YOUR OWN RISK. We (RACKNLOAD) and UA-cam will not be held liable for any injury or damage or violation of the law. We do not sell or deal in firearms or any other shooting products. Such practice is heavily regulated and subject to applicable laws. We DO NOT sell Firearms, shotguns or airguns nor do we sell parts, magazines or ammunition. PLEASE BE SAFE AND RESPONSIBLE.
© RACKNLOAD 2018. - Спорт
Anyone who's unsure, buy this. It's amazing. I'm a grown man and I'll admit I've been playing with this like a kid again. It brings out your inner cowboy. I dare you to try NOT spinning it around like a knock off Doc Holliday. My only suggestion would be to make sure you buy PLENTY of c02. I've been using like 3 cartridges a day since I got it.
PS if you're low on c02 or want to empty the cartridge, pull the trigger and push the hammer in. Hard if the c02 is still filled.
If you're looking around for a BB pistol I would recommend this one ua-cam.com/users/postUgkxnX9wE_Q8zvF75Y5iWzTU3Q4FlrtyGApQ . I ordered two BB pistols from Dan Wesson and this one is so much nicer than the other one. It's a well built gun. Can't say that about the other one. I thought the Mag was pretty easy to load. I also just lock the spring back and fill up the hole with 16 BB's with no sweat. Easily remove the rear part of the handle from the bottom with the Mag removed to access the CO2 chamber. Sweet. Very nice painted sights on both ends. Doesn't have blowback but the gun is rated at 410 fps the blowback edition is 365 fps.Didn't really know much about BB guns before but now I see that Umarex makes some fine BB guns. You'd be hard pressed to find a nicer CO2 air pistol than this one I think. Just seems flawless. It even states on the packaging Glock perfection. I think my next Airgun may very well be an Umerex. Oh and if you really want a blowback (don't think amazon sells the Glock w/blowback) you might consider the Beretta APX by Umarex. But that gun is only rated at 310 fps. All things being equal, if it were me I'd buy the Glock again in a heartbeat :)
If i had both id be tempted to swap the grips over purely for contrast.
Si sui sottomarini il telefono non prende bene
@@marcorighini6201 wtf are you saying? The google translate made it sound a bit wierd 🤣
That's exactly what l did l have both colts one in silver and one in worn black, the faux ivory on the silver looked cheap and nasty just like the plastic they are, yet the grips on the worn black were a very dark walnut looked nice on the black but because l was bored l switched them over, took literally seconds to do and the differe was astonishing and rewarding the faux ivory against the black did give them a genuine ivory look and the contrast was stunning then the dark walnut against the silver colt made them look far more premium, as if customised and looked much more expensive.
@@berntsrensen1217 as an Italian I confirm, the translation isn't wrong
he literally wrote "on submarines the phone doesn't work well"
@@Racrenmaybe it's a reference and we just don't get it, I don't know
bought one from local sports authority here in kona Hi. they only had the nickel plated, so that's what I got. used to have a ruger 30 carbine revolver, that I missed so much, but now, I can have fun with this one. trigger so nice, and good power, and very accurate. and loading the shells in the gun, like a real gun. plus it's all metal like a real gun.and also, it can shoot pellets, thanks to chinature reviews.
Bibiongobygoviiibiviii bnbducruappRIP
I love this revolve a lot. I wish they offered them with different barrel lengths and with adjustable rear sights.
There used to be a 7and half inch version,, dunno if it's still available
You can’t really have adjustable sights on a peacemaker
@@hks2.3stroker6 Yes you can. Aside from various modernized derivatives by Ruger, Freedom Arms, and Magnum Research, Colt themselves sold versions of the 1873 which featured a proper drift adjustable rear sight even back in the 1800s and early 1900s, such as the special order made by the Bisley shooting club. Guys like Elmer Keith also designed his fabled No.5 custom one with a similar sight.
I love the beautiful looks of the Peacemaker, and the classic plow grip feels _absolutely fantastic,_ but man do I not care for the shallow sight trough on the top strap, that's not the sight for a full sized sidearm, that's the kind of no-snag sight you'd want on a small and compact handgun, where you basically wouldn't expect to use them anyway.
@@biggusdickus5986 That'd be pretty cool, though I think a 4" or 4.5" barrel would be best for me, I like how revolvers of that size balance in general, there's still plenty of sight radius, and it looks particularly aesthetically pleasing to me.
The nickel version is a beauty.
I went to a lot of trouble to fabricate a rifled bull barrel for this pistol now I am happy
Thank you for showing how to put the co2! Other videos don’t show it, gave it a like just for that ❗️
Every video i have watch they have show that
charging sound is beautiful
Very cool to see both blued and nickel plate look peacemakers. Great video.
13*Luza13*Junior. Jumior $60000 0000000000
$50000000000
It is so satisfiying to watch!
Oh and I love the video as well great job on it
Bdhfur
HEY NEIL , congratulations on over 3 million views on this review . GREAT
Cheers dude!
Brought one today. Great review
I like the way you did this video, you let the guns do the talking.
Fakuju bbbiiiiççç
like the way he kept his thumb all over that shitload of writing on the other side of the gun so that nobody can see that it screws up the look of the gun
G
?
I have the nickeled one and it works like a dream!
I would only use one but the colt 45 single action revolver is my favorite gun
cool
Definitly cool, not as cool as the .45 colt, but definitely something for the youngins. I love it.
Just ordered one of the pellet versions of this and I'm so damn excited.
@2be Blunt wonderful. No issues at all with it yet. Havent had to take it apart but I should just to clean it. But it's a beautiful gun with a beautiful finish. I cant wait to get another one someday.
@2be Blunt I dont think you'll regret it. The weight is very similar to a real SAA and I love spinning it around like I'm Doc Holliday lol Its the best buy I've made in a long time
yah Hatya yah Pyar mere ko chahie
uma das minhas armad favoritas
Cara eu adoro essas colt, acho elas super realistas e precisas, tem excelente acabamento e material de primeira qualidade, muito legal seu vídeo usando as duas versões em funcionamento!
Eu tenho uma adoro brincar com ela prático tiro esportivo mais pra ter esta belezinha VC tem que desembolsar 1800 reais kkkk.
No convo,straight product👍
plan on getting one of these.
the
I
Waswondering theglowinaoz
No bs talking about it or comparisons like others when shooting something like a 92f berreta model and they are all dressed up tactical and even have a course they run through and so on. That parts fine and if people are having fun that's the best thing on the planet. There needs to be more happiness on this earth. But I do think enjoy hearing bad mouthing of other people's videos, and or about there thoughts and so on. There's a time and place for that stuff and a good and bad way of commenting on others work. I'm still trying to learn the best way to not hurt someone feelings when they've put a lot of time and even money into stuff say a video on here etc. Anyways I really enjoyed your video and even though everyone gets a thumb up from me, mainly due to the fact that no matter how bad or how much I completely disagree with a person's words and or such the fact that it still took talent of some kind or of any kind to make and upload not to mention the courage knowing they were going to be attacked and bad words said abut them no matter the topic, subject matter or views expressed there's always jerks using absolutely horrible language that can hurt even people in the industry that are subjected to that style of ugly criticism there entire working group life
+fred jackson Appreciate the comment mate, you do come across all sorts of folks on the internet. I like having valid criticism, but the keyboard worriers just make me laugh! ATB, Rack
I need both of the those colts
i want them to bring out a buntline special preferably with a detachable stock
“THE RELOAD TIME IS EXHILARATING!”
yes its the heart of the duel damn you shot my hat
The Cowboy Casanova
Always use pellelube on the top of the gas cartridge, and read your manual. Some require the BB to be loaded in the front of the shell, not the rear. Some shells are Gold and some are Silver, there is a reason.
They are very well made. Made with zink.
Hmm still holding a thumb on the ME BACS SAA, for just 50-60 quid more vs the cost of the Pellet version of the Umarex, high pressure air contained in each cartridge :)
Es una excelente réplica del colt. 45. Bonita y precisa, la decepción me la lleve al comprobar que la vaina corresponde a un calibre . 357 magnun
I have the 6mm BB variant of the WG Colt Peacemaker SAA .45
Watching your channel is going to end up costing me mint 👍
😈👑💰💰💰💰💰🔫🔫🔫🔫Junior. Cio pelo. SP. Junior.woiqwyi.Biestaxio.
Lol so very long story short great job and thumbs up especially this time for such a great job and yes because of this video, oh and this is something like 5 or 6th video but is definitely my last and again yes I'm buying it only cause of this video, I'll let everyone know how I enjoy it after receiving it and all I love and dislike. Thanks again
Was this befor you started talking on you vids bro. You have come along way since this vid hope i get confident enough to make vids with speach :))))))
Thanks for the vid. Really. Fun to watch.
Awesome gun
Excellent
How many rounds can you fire with a C02 cartridge? How expensive are CO2 cartridges? How powerful is the Colt? FPS?
Nice video bor
I like them ..very nice ...
Geez how many shells you putting in them six shooters
Acho perfeita exelente acabamento. Como faço pra comprar um a
nice video
Gostei muito dessa arma principalmente essa mai clara.
Do the same comparison for the pellet revolvers too please.
What's the difference between the pellet version and this one?
@@flyingpiglet rifled barrel
You did an excellent job of keeping your thumb over all that writing on the other side of the gun, so that nobody can see that it's got a whole shitload of writing on the other side. that kind of screws up the look of the gun....
So nice 😊
Macree reloads it with just a quick roll
You really don't need that rest.
I would advise still following the old cowboy safety of only loading 5 round (load 1, skip 1, load 4) since mine slipped once and fell on the hammer and fired, however luckily it was on an empty chamber else I'd probably have a lead slug in my leg!
These bb guns probably have some kind of safety mechanism against slipping and firing upon falling on the hammer.
Nevertheless the cowboy load per se is definitely not to be neglected!
@@ytucharliesierra I keep 5 bbs in my 6 shooter (Barra Schofield #3) , because realism :)
.
It seems to have a half-cock but I don't know anything specific about the drop safe characteristics.
i notice that the hammer of the air gun soft does not go forth word in just half way
এর দাম কত
POTENCIA NOTA 5 BELEZA NOTA 10.
Good, I like
was waiting for the cowboy quick unload of all six shots had to subscribe after i saw you do it big thumbs up
Tenho um, excelente revólver era meu sonho de consumo, estou realizado
If only they'd make the 7.5" cavalry version...
+Harborne Bluenose I just wish they would come out with wood grips for them. I really miss my old Colt clone, (with the 5.5 inch barrel and wood grips.) I don't mind the faux ivory grips too much, but it just doesn't feel the same as wood grips.
They do make it now!!! I already have the 5.5" but now I'm getting the 7.5" and shoot both at the same time - one in each hand! It's going to be dangerous!
Harborne Bluenose Now 7.5"Already made next time we must excpect for buntline special (12")
Mind Your Own Business They do make them. Also make a custom 3.5 inch with a riding hammer for hand fanning .
लय भारी
Nice 👍
does anyone know where I can get the black one with the brown handle I've been looking everywhere
I love the high definition video. It's like gun porn!
Please dude watch your language because kids get on youtube to you know
+Levi Hickman They shouldn't be on UA-cam in the first place, or better yet, a weapon demonstration video.
No by.
What should u do if your safety jams and won't go into safe
Nice looking gun but I wish they would make the hammer sit properly when fired .
+John Price It is for the gas seal.
I just noticed that exact same problem and totally agree, up till a few minutes ago I couldn't stop commenting on how accurate it is or was compared to the real deal as I have owned two real colts. But compared to all I've seen in the past and actually there really hasn't been that many especially in this class. So I guess also considering it could've had a bright orange or red plastic tip and a certain % of the gun in clear plastic as well so ya it's pretty amazing
Fr Ja looks gorgeouse. Is this the most realistic revolver out there at the moment?
Agree 100% !
It's fucking with me ;( lol
It seems that they all have that ''crappy'' finish on the Cilinder edges and some places on the gun.. I picked up mine today and it has also little dents on the edges of the cilinder it looks like it was dropped on concrete..
Em São Paulo tem lugar pra eu comprar pistolas de ar volta 45??
Careful cowboy, loading it like this you're gonna shoot your own foot :v
Eres hispano
Desi katta pistol Lene Ko Sampark Karen vaaste WhatsApp number
?
Desi katta pistol UP Sampark Karen.o9678092876
Good ol' hickok
Nice pistol
shells looks same size and same stamp on winchester. they work on both?. could tell that on description i would buy lotsa more. i bought both gun and shells that was available. looks indentical. havent fired any shot yet
Como adquirir um exemplar desse Colt ?
It's a nice gun, but its muzzle velocity is very low. When the gun is fired, it reaches the target in almost 50 seconds, even though the target is close. In air rifles, it reaches the target even at a distance of 200 meters much faster than that, it's just an ornament
What size of bullets are the Umarex Colt Cartridges? Do they closely match the .45 Long Colt rounds? I'm trying to find a holster for mine
10:10 angry neighbor..... dont hey just piss you off
What did they say haha, I could hardly make it out.
Si les compre una de esos juguetes a mi hijo de 10 AÑOS!
Wow 2 shots on target! From... maybe hundred? You really need to get pellet version, like Schofield
Schofield isn't a rifled barrel l have just bought one a few weeks back it doesn't do well with pellets for accuracy because of the smooth bore and I'm a very very good shot, but with BBs it was far more accurate, the colts have a partially rifled barrel about 2.5 inches and the rest is smooth bore but the rifling puts the spin on the pellet.
I want those guns
Hey, would you check out the SAA replica I built?
Well so much for the "Show & Tell". Sure would have been nice to have had some type of narrative to go along with the video.
+frenchie6189 Watch the full review video I have done.....
Good
Do you have the whole strict with them pistols
How strong is this gun ?
Where am I get one
Where should this gun be bought from us
Please add a link to where i can order one of those colt BB air pistol i live them they are amazing!!
Be kinda difficult to tell someone where they can buy them unless that person asking lives in the same country as the person being asked. The reason why us often places will not ship to another country due to import export laws and the customs office on the receiving end...there are some that will ship to another country BUT IF it is Seized by Customs destroyed and or returned to shipper...The Oerson who Ordered the item and Paid for the item if First and Foremost Out the item,Out the Money Paid for the Item and Shipping, and customs in their country may or may not charge them for the seizure and testing done as well if it was destroyed or sent back to shipper, secondly they may also criminally charge the person who ordered the item for illegal importation of a firearm and much more.
I live in Canada so if you live in Canada you can purchase these from Cabela, Princess Auto, Outdoor Outfitters, Airgun Source and many other places across Canada. Normal Price varies from place to place province to province lowest being $135.00 highest $550.00 Plus Shipping and Handling Plus any Insurance you may place on the order plus applicable taxes in Canadian Dollar. On Sale they range from $99.99 to $499.99 plus the shipping and handling insurance and applicable tax.
When buying from.another country besides the rate of exchange on the money there is still shipping and handling, insurance if you so choose, applicable taxes but Also you will have to pay import tax duty and customs fees and local taxes.
BEST to go to your local sporting goods store, airgun or airsoft store or even your local actual firearms dealer if they don't have it ask if they will order it In for you direct from Umarex. Most Dealers have Import Export Licence which allows them.to Import from Other Countries
Hello.. From what distance do you shoot at the target? It reaches the target approximately one second after the trigger is released.. The muzzle velocity seems low to me.
I'm sure I read an article saying that these gun are better made than the original ones and that came from colt 🤓🤓
You have got to be joking !!
Where did you buy this play gun
I just bought an 1858 Remington clone and from what I understand they
must be cleaned immediately after firing or they will rust. What is
involved in that? What solvents and to what degree do I need to
disassemble? I'm told soap and water. Is that true? And what about
lubrication. I'm new to black powder.
This post is on umarex airgun
But if your talking about actual powder burners. I have several original colts and remingtons among others no powder burner reproductions.
Yes Black Powder Us Corrisive but not as pad as you'd think. I have firearms dating as far back as 1420 and U guarantee they didnt use soap and water back then yet they have mild potting and zero rust fully functional and used today.
You should Alway clean your firearm after using it before storing it away till the next time and doesn't matter if its black powder or smokeless. Stake care of your Weapon and it will take care of You.
I personally Use a copper cleaning brush ( bore brush) for the bore and the chambers in the cylinder followed by cloth patch with hopps number 9 in bore and chambers on the cylinder let sit a bit then repeat and again use the copper cleaning brush ( bore brush) then another cloth patch of hops number 9 followed by a nylon cleaning brush ( bore brush) repeat with cloth patch and hops number 8 followed by nylon brush ( bore brush). Then I use a dry patch on the bore and each chamber several times.
I repeat these procedures till my dry patch comes out looking fairly clean then I use a cloth patch with light coating of hopps number 9 on the bore and rack chamber for storage.
As for the outside of the gun I use a cloth soaked in hops number 9 let it sit for 15 29 minutes then use a dry cloth to wipe clean repeat if needed. Then wipe the entire gun down with a very light coating of hops number 9 for storage.
How far do you strip the gun for cleaning, basic cleaning remove the cylinder remove the nipples from the cylender let nipples soak in hot water while cleaning the gun. ( let dry or blow dry when finished cleaning the rest of the gun and give very light coating hops number 9 for storage and reinstall in each chamber on cylender when finished cleaning ready to re assemble.) Once everything is cleaned reassemble slightly lubricate and store.
Depending how often you shoot and how many rounds at least once every month every second month at most a total strip down and cleaning, remove cylender, chamber nipples, grip panels, main spring, hammer, cylender locking bar/trigger spring, trigger and ratchet arm and cylender locking bar.
Using small brass or copper wire brush truly scrub the inside of the entire frame when these springs and parts rest and put light coating of hopps number 9 the roughly clean then lubricates each part and spring as well as the rest of the gun as mentioned. Reassemble give light coating of hops number 9 for storage.
This gun is made in the same way.
Sweet, the gun can be fanned.
Any fast draw on the horizon?
Have you tried to plink a quarter out or the air?
+pfshooter Never tried fanning should of really. If I'd had ago at shooting a coin out of the air I most likely would of shot my neighbors window lol!
RACKNLOAD same lol are u in uk. Every time I shoot I always get paranoid it's really loud and pissing neighbours off
Probably not strong enough to withdtand fanning. Even standard real steel revolver are not strong enough. People doing fastdraw shooting have them modified to take the strain of fastdraw. Not me saying that but Howard Derby on his channel Fastdraw 101.
@@drdoom-skull2244You are dead right, it will break the hammer and trigger. The guys an idiot for showing it being fanned,. And what was with all the loading
Olha o governo que o povo elegeu
Wah canggih banget.
Nice airsoft silent shooting..
Pardon my ignorance but, is this an airsoft gun? or an airgun?
What is the-internal design
Wait are the cartridges reusable
Hi
were the guns that off, or are you that bad a shot? also vid did not show how powerful they are!
👏👏👍👍👍👍👍
Where can I buy them guns
9.20...is that safe for gun?
Queria comprar.
É liberado aqui no brasil desde o ano passado nao precisa.maid cr pras armas de pressão. Co2 só vai desenbolsar uma grande quantia de dinheiro sse comprar no brasil