Pulsar Turbo GTX3584RS Install + 3 BAR BOOST RUN
Вставка
- Опубліковано 22 січ 2021
- Installing and testing the new pulsar GTX3584RS + Spool Datalogs
For those interested in this turbo, follow this link to Pulsar website
www.pulsarturbo.com/
2.2L AAN 5 cylinder
7a cams
H beam rods with ARP bolts
MLS Headgasket with ARP studs
GTX3584RS T3 0.82AR
3" exhaust
Screampipe
2x 044 from a catchtank
E85
Street ported head and matchported intake
Song: Julius Dreisig & Mandrazo - Swalla [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: NCS.io/Swalla
Watch: • Julius Dreisig & Mandr... - Авто та транспорт
Over 1 minute after engine shut off and still spinning!
Impressive!
Thanks for the upload! The review can't get any more honest than this!👍
Is that turbo like the Spartan gt3584r.
how is turbo working after a year?
this is awesome. just got the pulsar gtx3584rs gen2 for my fully build 1jz.. hope to see some nice numbers ;)
Should be a fun combo :)
How is it so far?
Vart har du köpt turbon från? Pris? Verkar ju funka riktigt bra även om det är en garret kopia. Kollar alternativ till min bil därav mina funderingar.
Do you have manifold pressure sensor installed? I am curious to know what EMP you have with 2.9bar boost.
I have to ask how you came up with this boost pressure. I have the same loader but mine speaks a little later
mine also keeps spinning for over a minute after shut off. awesome turbos
Do you recommend pulsar turbo? it is cheap , compared to garrett dyno number ?
Hur är turbon idag ? Sugen på att köpa en PSR.
Hey! for what reason did you replace PT6062?
Did you leave the coolant port unhooked?
This is sick man!
Hi How it performs after a long time?
Hur har snurran hållit?
Awesome vid..just placed an order for one of these, wondering how's it holding up and did you hook up water lines?
I did not hook up water lines. It has been holding up good. I would not recommend driving without water cooling though.
Hey,is this Turbo only oil cooling?
How much power did this turbo make?
How much power at 3 bars ?
This turbo is impressive, I noticed though you had to manually port the compressor housing for the external wastegate / boost source port. I didn't know that. I thought the speed sensor there can be used as the wastegate port.
no
Hey mate just wondering, do you find the spool is quite loud? I have just put one of these on my Barra and spool is super loud
Yes spool is quite loud on this.
Did you get good results?
100-200 time?
this turbo is good ? it very cheap
I Need twin scroll with 1.06 A/R. Where to buy?
Är du nöjd med turbon? Sitter och funderar om det skulle passa mitt Audi S2 bygge
Beror på hur mycket du tänkt ladda och vad du vill varva samt hur effektiv motorn är. I vårt fall så har den funkat riktigt bra :)
Quick question, why not use the plug fitting instead of drilling the housing?
cause you can't. not a pressure source.
@@B7_S4_Turbo I've seen other setups where they remove the npt plug and put in a barb or an fitting there for boost reference
Мощно но сложно. Надо разбираться
Any update on the longevity of these , hows it been holding up?
want to know this too
@@yanisxae8628 i asked on a different youtube video, and the dude said he was happy with it, no shaft play, or bearing noise
@@yanisxae8628 i can send you a screenshot and a link etc
Sure if you want to do that. My name is the same on instagram :)
How does the performance compare to the precision it replaced?
Spool is around 500rpm better with new turbo as far as i can tell from old logs. Holds the same pressure up top too.
@@thingstodohd1933 this is good to hear👌🏾
@@thingstodohd1933 same turbine housings? Both ball bearing?
@@quintincallahan9051 both ball bearings. Both 0.82 AR T3 turbine housings
Compared to the 6062? @@thingstodohd1933 Video would have been perfect with those 6062 logs as well
Does it work on the PTE vband flange?
No, the PTE vband was cut out and replaced with the one supplied with the new turbo.
Wow, what injector size was used?
2200cc
Your wastegate is from pulsar?
No. It is audi original.
My wrong.. I mean your external wastegate..
Standard displacement or stroker?
E85 or normal petrol?
What ar is the housing?
Not as laggy as I would of thought.
2.2L standard displacement, it is running on E85 with T3 0.82 AR turbine housing
Awsome. Have you a link to where you purchased the turbo, or your build?
@@dieseldes6578 I updated the descrition with a link and a quick description of the setup. Thanks for watching!
@@thingstodohd1933 what rpm does it start spooling at?
@@GreatLakesLogger depends what you mean by spooling, 2500rpm 0.1 bar
How is it holding up?
Has been holding up good for 1 season.
@@thingstodohd1933 good cuz Im ordering one for the evo lol
Awsome! Im a dealer for these turbos. I give great discount to fellow enthusiasts. I post world wide and wont be beaten on price. Try me. Also 3 bar of boost is awsome. is that e85? Im also running maxxecu.
Nice! It is running on e85. I sent you a mail!
@@thingstodohd1933 e85 is a dream. I’d love to run that fuel in the U.K. replied. I’m more active on Instagram if you have it. Bey_tek.
Well I would like to try a gtx3584rs with a twinscroll turbine 1.xx ER in my diesel engine.. Currently running 550hp 935nm diesel with Twin Turbo but I would like to feed the exhaust of twin turbos to this GTX.. would be a nice project :).
@@jacksonbartelli Hello dude, No twinscrol options available sorry
@@BEYTEK Pulsar have anything in the neighborhood of a 42mm turbo? Something like 400-450 hp?
0.63 0.82? Tnx!
0.82