this is very beneficial in many ways, the data logging is quite valuable in any set as well as from a owner perspective or manager, you can use data logging to ensure for example your install teams Are performing tight vacuums and adequate pressure tests
you can use low loss fittings of many different types with those hoses. i remove the Depressors so i can put low loss or hook to scharder core removal tool, for different options.
Ready to pull the trigger on digital gauges and not afraid to shell out the $ but still don't want to get fucked. Looking at the P51-870 and found you. You seem like you're no nonsense and tell it like it is. I agree with you on the bag. POS. But your review on the manifold tells me I'm on the right path and I will probably go with the 870. I subscribed and look forward to Future videos.👍
Hey the manifold I have is very useful and it stays charge for a good period of time but you will need to have a way to charge it daily if you are a service tech and have the equipment running for 8 hours. Bluetooth doesn't work so great nonetheless it's an incredible tool.
What should I do when doesnt allow you to align the screen.? I touch top right corner to set up and it move something else.Can someone help me out ? Thanks
Yes I know but if you have a 64 volt battery bank and have two solar panels that are 20 volts each you will have a hard time to run the battery bank on 40 volts
this is very beneficial in many ways, the data logging is quite valuable in any set as well as from a owner perspective or manager, you can use data logging to ensure for example your install teams
Are performing tight vacuums and adequate pressure tests
I suppose you could do a better one in prove Your point
you can use low loss fittings of many different types with those hoses. i remove the Depressors so i can put low loss or hook to scharder core removal tool, for different options.
It's 2019 this type of hose has been ruled illegal to use for all most 30 years unless you pay for more fittings
Illegal? Lmao you must be in komifornia or something they are in wide use in colorado.
@@Crazy88boss1 I live in a Republican state are most people here are Republican
How to connect this device to your smart phone?Thanks
Had these for a couple months. Not a fan. Would totally go back to sman460s
I'm satisfied with them
Great review
Thanks Friend
If they sewed it on 4 sides, then you would need to take your hoses off every time. But yeah...it should be beefy and have a hook
The Micron gauge function only work with the vacuum sensor?
yes
Ready to pull the trigger on digital gauges and not afraid to shell out the $ but still don't want to get fucked. Looking at the P51-870 and found you. You seem like you're no nonsense and tell it like it is. I agree with you on the bag. POS. But your review on the manifold tells me I'm on the right path and I will probably go with the 870. I subscribed and look forward to Future videos.👍
Hey the manifold I have is very useful and it stays charge for a good period of time but you will need to have a way to charge it daily if you are a service tech and have the equipment running for 8 hours. Bluetooth doesn't work so great nonetheless it's an incredible tool.
I'd go with the Fieldpiece SMAN 4 port if I were you
It's not for tool's just the manifold, I have one and it's great.
How do i use micron gauge just purchased these yesterday. Directions are very vague.
There is a micron sensor in the bag it's a brass sensor and it plugs into the A1 Port I think
Yea. I seen that but do i put the micron gauge directly on vacuum pump or on manifold?
@@MappingSubber The micron gauge would be used on the unit with a service valve core remover tool
@@solarpowerelectricityandel2915 hey I'm having problems with vaccuum on these. Help
@@FranciscoPerez-je4cb whats the problem?
What should I do when doesnt allow you to align the screen.? I touch top right corner to set up and it move something else.Can someone help me out ? Thanks
I'm going to make a video about this problem and how to fix it i have to do this before.
You must hit the power 3 times rapidly after power up
Como faço para adquirir esse aparelho?? Sou do Brazil !!!
Its not a toolbag, its for the gauges...
Mark Williams I'm absolutely sure that the manifold says that tool and if it's for the manifold set and it's a bag wouldn't it be called a tool bag
don’t be a baby these hoses are great
I think it's a bag review video not manifold
I will not review the bag next time.
Just get some low loss fittings, not a big deal... already have some
alguien q pda. pasar información d ese equipo de manifold pero en español x favor... q estoy interesado en comprarlo
Son yellow jacket..
Were your parents related?
The same species unlike you
Battery life sucks absolute balls, and bulky as hell.
8:20
That solar panel would be slightly more efficient if it were out side.
Yes I know but if you have a 64 volt battery bank and have two solar panels that are 20 volts each you will have a hard time to run the battery bank on 40 volts