Thanks for the video. Exactly what I was looking for. After the drilling, what s the tool called that you used to clear out the concrete? The audio is a bit soft at that point.
I'm getting ready to build a block building on my property in Fl. I do not want dry wall on the inside. Have you ever seen anyone lay the wire down between courses of the blocks and stick the wire out the inside of the room to be cut later, kind of like people do with log homes? I know I'd either have to mount the box on the block wall, or cut out an area for the box if I wanted it flush. Thanks!
No that’s not a good idea, it’s better to put some conduit in and run the wire inside it, you don’t have to finish with an electrical box, just core drill a 65mm hole 50mm deep over the conduit, break out the core and cut the conduit back then screw the switch or plug straight back to the wall
@@hobsonproject So, run the conduit between courses of the blocks , or another way? Maybe down the wall from the top? I have a bit of experience of blockwork from working with my cousin many moons ago, but I don't see how conduit would come down the wall from the top since I have to pour a single lintel. Hence, the clarification. I want the electrical outlets flush on the inside of the block wall with no drywall. Thanks!
@@da324 Basically run the conduit like you would run the steel reinforcing for the blocks. Conduit can be short to get the blocks over it and laid and then extend further up with a coupling, can run horizontally if needed to get into the right space, but just remember to use slow large radius bends to make pulling the cable easier. 👇 Conduit in block wall ua-cam.com/video/hec23O6whlc/v-deo.htmlsi=dE8qkD-8XfZ7B6G0
This is a solid plastered block that’s the finish if I was using packers and drywall I would run the cable behind the drywall, however this install would work with direct stick drywall just use over length screws to fix the socket outlet.
I notice you are a concrete / wall person, rather than an electrician. Do you find that most electricians use this same technique to install boxes in a concrete / block wall?
I have never known an electrician use this technique as they usually have someone else chase the conduit and cut the box then they or someone else install the conduit and connect the box then usually someone else mortar up the wall. I guess the end result is the same as my cast in method, just harder, at the end of the day I will install draw wire to make electricians life easy, as electricians like an easy life, and they will pull their wires and fix the socket. Also keeps my costs down.
@@hobsonproject LOL sounds about right - we electricians don’t like to get our hands dirty! I have to install 5 boxes in a 100-year old concrete kitchen wall. It will have 1X3 furring strips, so I won’t have to dig a chase for the wires. But I do need to sink the boxes. I was planning on just drilling a bunch of holes with rotary hammer - but your grinder technique is a great idea.
Thank you for recording and posting this valuable educational video.
Hello, thank you for the video.
Can you please name the tools that was used? Thank you.
Good job !🎉
My favorite brand of tools as well: Milwaukee and Hilti .
gee, that was easy
I wonder if cutting the box in the block before you fill it with concrete may be an idea?
Or just use round boxes like smart people
Thanks for the video. Exactly what I was looking for.
After the drilling, what s the tool called that you used to clear out the concrete? The audio is a bit soft at that point.
excellent work!!! where do you work? in florida?
In NZ
Yes it’s a lot of work, but didn’t take this expert all that long. Unless he edited out a lot of it! Nice - great technique and lesson thank you.
I'm getting ready to build a block building on my property in Fl. I do not want dry wall on the inside. Have you ever seen anyone lay the wire down between courses of the blocks and stick the wire out the inside of the room to be cut later, kind of like people do with log homes? I know I'd either have to mount the box on the block wall, or cut out an area for the box if I wanted it flush. Thanks!
No that’s not a good idea, it’s better to put some conduit in and run the wire inside it, you don’t have to finish with an electrical box, just core drill a 65mm hole 50mm deep over the conduit, break out the core and cut the conduit back then screw the switch or plug straight back to the wall
@@hobsonproject So, run the conduit between courses of the blocks , or another way? Maybe down the wall from the top? I have a bit of experience of blockwork from working with my cousin many moons ago, but I don't see how conduit would come down the wall from the top since I have to pour a single lintel. Hence, the clarification. I want the electrical outlets flush on the inside of the block wall with no drywall. Thanks!
@@da324 Basically run the conduit like you would run the steel reinforcing for the blocks. Conduit can be short to get the blocks over it and laid and then extend further up with a coupling, can run horizontally if needed to get into the right space, but just remember to use slow large radius bends to make pulling the cable easier. 👇
Conduit in block wall ua-cam.com/video/hec23O6whlc/v-deo.htmlsi=dE8qkD-8XfZ7B6G0
@@hobsonproject Thank you!
Can you show a video of tube insertion while laying bricks?
Here’s how I get the conduit in the block wall 👉 ua-cam.com/video/hec23O6whlc/v-deo.htmlsi=dE8qkD-8XfZ7B6G0
What about furring strips and drywall ?. Your box needs to be flush with the drywall.
This is a solid plastered block that’s the finish if I was using packers and drywall I would run the cable behind the drywall, however this install would work with direct stick drywall just use over length screws to fix the socket outlet.
Just put a metal box in before they pour,it will save a lot of time/ or a foam block.
Problem is keeping the block there it will get blown out by the conc most of the retro cutting is in the block anyhow which is soft
The Tradesman is only as good as fixing up His F up 👍
Nothing like a big F up happens all the time most are fixable but a lot are not
LMAO 😂💦 I'm always very wary of other Tradesman who use the words , Easy and Perfect 👍
I notice you are a concrete / wall person, rather than an electrician. Do you find that most electricians use this same technique to install boxes in a concrete / block wall?
I have never known an electrician use this technique as they usually have someone else chase the conduit and cut the box then they or someone else install the conduit and connect the box then usually someone else mortar up the wall. I guess the end result is the same as my cast in method, just harder, at the end of the day I will install draw wire to make electricians life easy, as electricians like an easy life, and they will pull their wires and fix the socket. Also keeps my costs down.
@@hobsonproject LOL sounds about right - we electricians don’t like to get our hands dirty! I have to install 5 boxes in a 100-year old concrete kitchen wall. It will have 1X3 furring strips, so I won’t have to dig a chase for the wires. But I do need to sink the boxes. I was planning on just drilling a bunch of holes with rotary hammer - but your grinder technique is a great idea.
You could always core drill the recess for the socket 65mm say by 50mm deep , can dry core without too much dust and then no water slurry problems
Thats alot of work just to add a gang box.
Lot easier than cutting the whole wall for the conduit remember this is a block finish, no wall strapping.
Call the mud puppies for that work