It is actually simple but more complicated than ancient devices. It is simple compared to devices that would be dependant on your stupid phones in order to operate. :) I hate phones.
I have just learned by reading manual that, when either heat or cool flashes, depending on the setup, sometimes it is a specifically set delay of 1 minute or so so to protect a device, cooling or heating that may have a compressor. The compressor needs a safety because, switching on command and off say, after a power outage, can damage a compressor. It is a delay safety feature built in the thermostat of about 1 minute delay before it actually activates.
Yes it does have a nice large readout area BUT other than the actual room temp, and maybe the temp set point, the font is sooo SMALL as to be unreadable without a magnifier.
I have a question! When you changed the Celsius, what does it have to be at to be cold! Right now the top number says 225 and the middle number is 30. BUT IT WONT GET COLD
i have problem cant turning off. i set main screen ,(3 mode settings) set to off,, set fan auto, no small number showing then i try ..same thing with heat then then
Can you help me. This thermostat is set to 26 on the bottom and on top 200. It is very hot in Texas and I really need my thermostat to back to normal can you help me
I want to add 60 on cold but it would not changed it would just stay at 100 and when I press the negatives button it just stays at 100 and the + bottom moves up
Why did you hold the plus and minus buttons down at the same time @2:45 to change the temp when you only need to press the plus or minus to change it? You are confusing people.
OMG i been screwing with this thing for 5 hours its set to heat, fan on auto qnd set to 72° my apartment is still 65° it has been 64 for most of the evening
This would of been helpful a year ago when i accidentally put it to Celsius. Now the issue is the heat setting won't pop up wtf . How many of these videos do I have to watch and still nothing helps. Not trying to spend $100 just to call a person out like we did when i put it on Celsius and the other idiots I live with turned it all the way up past 200 Celsius for the A/C and nearly blew the thermostat that day.
Stop saying it easy then we wouldn’t be here
Facts
It is actually simple but more complicated than ancient devices. It is simple compared to devices that would be dependant on your stupid phones in order to operate. :) I hate phones.
Factssss Thank you!!!
😂It's easy af bro, you just gotta know what to do.
😂😂😂😂
I have just learned by reading manual that, when either heat or cool flashes, depending on the setup, sometimes it is a specifically set delay of 1 minute or so so to protect a device, cooling or heating that may have a compressor. The compressor needs a safety because, switching on command and off say, after a power outage, can damage a compressor. It is a delay safety feature built in the thermostat of about 1 minute delay before it actually activates.
My cool is flashing and has been since last night. I cut it off and on but the ac won’t turn back on
Thank you! Your comment was way more helpful 😂
I’m just trying to get my apartment to cool down. I have the ac on but the place will not go below 80 degrees. And the air isn’t cold at all.
I’m having the same problem too. Have you figured it out why?
I'm having the same problem now
Sameeeee
Somebody pls help me
@@downrightcarnage I called a maintaince guy to come out he had to reprogram it now it works
My same thermostat the one at your display changed the Celsius and I need it to Fahrenheit. How do we get it back?
I am literally having the same problem
Yes it does have a nice large readout area BUT other than the actual room temp, and maybe the temp set point, the font is sooo SMALL as to be unreadable without a magnifier.
I turned mines off today and for some reason the cool option is not available anymore.. any ideas why
I can only get cool on my thermostat, how do I find the heat?
I have a question! When you changed the Celsius, what does it have to be at to be cold! Right now the top number says 225 and the middle number is 30. BUT IT WONT GET COLD
You are in the setup menu. Back out of it to the main display.
? Should it be Solid cool or Solid cool on. Thanks for your help
“Cool” keeps blinking air won’t turn on. It was on yesterday and just stopped coming on. Idk what to do help plz
Did you figure this out? I’m having the same issue
Omg I’m having the same issue too!!! Just Happened last night keeps blinking and doesn’t turn on anymore ):
Me too
It happens to me sometimes...give it like 5 minutes comes back on@@berenicegarcia2468
HOW DO I TURN IT ON????
Seriously why wont the heat setting show when i go the the menu? It only shows cool & off.
continue from previous comment ..
then i try set to heat, set of fan auto
set to off and won't turn off
it's cool air
do i need to change small number
On my thermostat I have it set to heat , fan on auto , blinks then stops but only the fan comes on .Help
I want to change from selso to regular heat and cool can please help me t 1 thank you
My thermostat won't show the cool option anymore for some reason, and I can't seem too get it to come back up..
Did you figure this out because my heat option is not coming up
Excellent & understood.
How does one reset the thermostat?
i have problem cant turning off.
i set main screen ,(3 mode settings)
set to off,, set fan auto,
no small number showing
then i try ..same thing with heat then
then
I hit mode to switch to heat and it shut off. Blank screen. Can't get it to turn on.
Can you help me. This thermostat is set to 26 on the bottom and on top 200. It is very hot in Texas and I really need my thermostat to back to normal can you help me
How do you turn fan to auto fan?
Can you lock this thermostat?
Starts at 1:23
I'm trying to turn on ac but the temp # is locked. It won't change. SO IT IS NOT EASY!
How do i switch it from Celsius to Fahrenheit???
What happens if heat doesn't come on?
My Honeywell T1 the heat will not rise above 67 will not go up to 70 what do I do
I'm expecting that now
Cool does not appear when toggling Mode!
Neither does mine and it's freaking how I don't even get a fan option
Tryna get the group home cooled down and its still not working smh. Got the window open
How the hell do I get the heating set to 90
I want to add 60 on cold but it would not changed it would just stay at 100 and when I press the negatives button it just stays at 100 and the + bottom moves up
Thats odd, is it really 100 in that room? damn... does it say cool on? You could have other issues with your A/C system and not the thermostat
i accidentally put mine in celcius how do i get it back
Why did you hold the plus and minus buttons down at the same time @2:45 to change the temp when you only need to press the plus or minus to change it? You are confusing people.
How to change f to c. Thanks
Hold menu and when 125 pulls up turn it to 0 for f and 1 for c
thank you
I was hoping to learn how to factory reset this model.
There is no reset
This video sucked. I’m pretty sure all of us here know how to use the simple functions and are looking how to use the more complicated functions
Our is going from 10-35 and its hot asf, how do i get back to 68
Damn thing says its on but shit ain’t heating only cooling my home🤧
The simplicity is in the design not the use…
I think it’s on ISU maybe.
Can't get it to go to cool
OMG i been screwing with this thing for 5 hours its set to heat, fan on auto qnd set to 72° my apartment is still 65° it has been 64 for most of the evening
Here the video????
This would of been helpful a year ago when i accidentally put it to Celsius. Now the issue is the heat setting won't pop up wtf . How many of these videos do I have to watch and still nothing helps. Not trying to spend $100 just to call a person out like we did when i put it on Celsius and the other idiots I live with turned it all the way up past 200 Celsius for the A/C and nearly blew the thermostat that day.
Yo, how do you think this is simple and easy when you have to go into advance settings to set the temp!
it blinks bc it’s a time delay.
Trouble shooting
I switched to heat and ac kicked on finally got heat but would not shutdown till switched to cool my house was 82 set at 62
Very useless video
This thermostat is the worst I have come across. It doesn't turn off.
not easy
Mine, do not show the cool option 🫠