Permanent Magnet Motor Using Magnetic Cancellation
Вставка
- Опубліковано 28 кві 2022
- Free energy motor using magnetic cancellation. This is only a prototype of a free energy magnet motor for testing. The idea here is to have the interaction between the permanent magnets on the rotor and a single permanent magnet on the stator to provide rotation of the rotor for about 300° of the rotation and then at the right timing, to use a pulse from a battery through a coil with reverse polarity to momentarily cancel out the magnetism from the single permanent magnet on the stator (the magnetic lines of the permanent magnet will be compressed momentarily until the rotor passes the sticky point and then will be released to continue providing rotation of the rotor.) This free energy motor is using a magnetic V-Gate with an all north polarity configuration. The stator has a single very powerful neodymium permanent magnet. If the permanent magnet on the stator is reversed, the motor can run in attraction or repulsion mode, clockwise or counterclockwise depending on the polarity of the permanent magnet on the stator. This video was made to motivate people to keep testing these kind of free energy motors to see whether more energy can be pulled out of it then what it takes to pulsate the single electromagnet. The coil also provides a collapsing field energy that can be put back in the battery to keep the battery charged. Also, a small generator can be connected to the shaft of the rotor to generate electricity to keep the battery charged.
Website: mindoftesla.com - Наука та технологія
Thomas Edison invented 2000 lightbulbs that didn't work until he got the number 2001 that did work. Everyone told him it was never going to work and he proved them wrong. Nikola Tesla believed that an electric motor could be built that could work on alternating current. Everyone told him it was never going to work, it took him 4 years from an idea/vision to an actual induction motor. Just because it hasn't been done or one hasn't seen it with their own eyes, it doesn't mean it doesn't exist. In one of Nikola Tesla's diaries, it says that he discovered free energy on point of break, he meant collapsing field energy. He built an electric car that he demonstrated to people and drove around without an apparent source of power like batteries. He built a variety of induction motors besides the one we use today. In one of his patents of a different kind of induction motor, he states that the efficiency of that motor is well over 100%. Nowadays, motors are only 80% efficient.
nice work kid anyway even if you end someday to have enough torque the volume of the motor make it not usable
even worst to much magnets used
@@iveco30.89 didn’t ask
M
What has that got to do with free energy dickhead, click baiting asshole.
There's an enormous difference between random people telling somebody in the past that something wasn't going to work based on their intuition and people who understand what's going on telling you that something violates the laws of thermodynamics.
Dude, I know the guy who designed and built Blackbird, the wind-powered cart that goes faster than the wind that Veritasium had a bet about. Everybody told him that couldn't be done, but I took one look at the details and saw that it could, because I could see where the differential came from. I spotted the solution within 5 minutes of looking at it. The untapped energy differential was heat normally lost to dissipation that was more than the law of entropy required, and he tapped into it to drive a propeller.
Where is your differential here? If you can show me where an untapped energy differential is in your system, I'll do you a write-up. I've looked hard at your device, and I can see no potential - if you'll pardon the pun - for generating energy, because there are no untapped differentials in there.
FYI, anybody who says an engine operates over 100% efficiency is lying. Anybody who says an engine operates AT 100% efficiency is lying to you. These don't violate mere intuition, like the Blackbird does, they violate the fundamental operating principles of the universe. Go do some research on Carnot cycles, and Emmy Noether, and Ludwig Boltzmann, and Rudolph Clausius, just to rattle a few names off the top of my head.
You do NOT have a free energy mean, because such devices are a fantasy.
Do not pay attention to those who are working only on breaking peoples down.. You have done a really good job, as always.
Even if this doesn't produce free energy. This is a fascinating motor build. And took some real ingenuity. Pretty cool
It's a straight copy of the v-gate. It's a very nice copy, but it would be nice if we could get some input energy numbers.
apparently the noise could be a problem
It uses a 3d printed plastic flywheel.
This is just stupid.
@@joshmellon390 any idea how inventing goes? Definitely not being a negative ass on the internet. It's trial and error and many versions increasing the value of materials used as more precision is needed. Use thinking before more useless shit comes out of your mouth.
@@joshmellon390 don’t be so harsh. He is doing awesome for his age. Especially consider what the rest of his generation looks like this young man is doing awesome.
Is this essentially a v-gate magnetic motor with an electromagnetic boost?
I enjoyed this video.
I appreciate your efforts on our behalf.
I am wondering if using a spiral cam might reduce friction and increase output.
Thanks for demo of a "Free Energy" electric motor. Electric motors are cool.
Attach it to a generator (you can make one with a few coils and magnets) and see if it keeps rotating, charge a battery pack from that generator and compare the amount stored when the battery runs out that is running the stator coil. Then you will know if there is a net gain - stored less battery initial charge. Great work.
Great job Daniel. I feel so happy for you and your parents. Keep up the good work. You are making your parents very proud.
I Like your channel name it’s true
Daniel, is the gate the narrow part or the wide part? So all the magnets are N on the wheel and you use the opposite pole to drive it (until you come to the gate) ?
This is absolutely brilliant.
very nice build! using a commutator will use lots of current, a hall sensor or a reed switch would be more efficient..
Hmm, makes me wonder if you could store some of that energy you have spinning in a capacitor bank and then switch over to it to power the cancellation coil when it gets up to speed. That flywheel is storing quite a bit of energy, and you have quite a few magnets slinging around there to "steal" some to power up the capacitor bank. This is good stuff. Keep at it!!
Yes, see Bedini et al.
totally, trickle charge
Yes actually, I put 6 maxwell super caps in serial, diodes, rectifier on the front of mine. It’s a valid design
Very interesting. Thank you!
Ok, I get the idea, but I don't quite get How it's doing it. how are you diverting the flux of the drive magnet away from the wheel at the right spot? I know it can be done routing it through an armature, like those welding magnets you can turn "off", but I'm not wrapping my head around how this does that thing.
Hello , I love this product and video! Can you provide a parts list to create this? I really would like to build one. Thank you!
Ciao Daniel,
Sei molto bravo complimenti,
Posso avere i link dei fornitori dello corrente per realizzarne una?
Grazie mille
Lino
Nice work man. Awesome
Are the electrical wires in the back ground coming from a receptacle and feeding this invention or are those wires feeding power to a load. It's not free energy if a receptacle is providing the power..
Daniel your ability to source the jigs to form your inventory is amazing. Can you show us how to collect the energy produced? So many questions, just want to say I enjoy your videos. Thank You for getting our minds working on free power. 👍
Dude... theres literally an output shaft running through the center axis... dont reinvent the wheel just use the damn thing!
@@lucuspreston7292 you sound like such a douche!
@@micjam1986 thats true i douche my wife regularly.
I dream about doing similar experiments with magnets and electromagnetism. You have some very nice projects (inventions)! Make sure you get patents on the good ones!
I have wondered if this would work and you proved it for me. Thanks I shall have to build one now
If using a round stick, would it be good ?
shell magnets
short front long back
cant believe i only discovered this channel now. i have been wanting to experiment with magnets in combination of solar power to generate free electricity making sure the magnets stay charged for longevity and a battery to store energy from the solar to keep it going still. and use this to output as much as possible with a lifespan as long as possible. main goal is to experiment with outputs given in comparison and to accomplish as little friction as possible in the process. i have an idea of what i want to build already. now to blow my savings on some good fun magnets and failures :D cant wait! thank you for this. really put me in the mood to start finally!
Isn't solar power free already?
@@EvilOverlord96 Technically no. They are so expensive, most people cannot afford enough to run a household on it. The energy companies place them on our roofs here, but the energy is collected by them. You will get a small compensation for it. It is criminal. Personally i'm looking for a way to make them more effective. I don't really like solar panels because they cannot be recycled. We will have a mountain of chemical plastic in 50 years. All to save the planet of course.
@@EvilOverlord96 "Free energy" in the context of this and similar videos means an energy output which can not be explained by physics. However, no device - including the device in this video - has ever shown such free energy in a credible way.
theres electricity in the atmosphere. some motors use a large antenna that get this energy to make them spin
@@josegarcia2762 Yes, there is electricity in the atmosphere. There is a surprisingly strong voltage gradient of about 100 Volts per meter. But there is no power behind this voltage, for power you also need amps. This voltage breaks down at once when a load is connected. Otherwise the perhaps 170 Volts between your head and your feet wouldn't be unnoticed. A large antenna will typically collect more power from radio waves than from atmospheric electricity. It has been calculated that harvesting atmospheric electricity on the _complete_ surface of earth would not deliver more energy than an average power station.
I wonder if you could somehow integrate a piston so the main magnet that’s driving it moves in and out like how you were doing with your hand. If it was mechanically timed out maybe it could get that thing pushing with some torque. Maybe have the axle drive a piston which pushes the main magnet in and out to drive the motor.
@MikkelRS yeah there you go - a cam lobe with just the right balance. You just gotta borrow a bit of the energy to get it past the hump. Because there’s definitely some sort of energy force being produced by the reaction between the magnets. There’s a distinct pushing/pulling force. Even just a heavier flywheel might be beneficial to store that energy momentum
@MikkelRS yeah you just have to find a mechanism to break apart the two opposing forces and harness that energy without it canceling itself out. It never does repel against steel, only attract regardless of the positioning so maybe that’s where the secret lies. Have it so the pulling motion is pushing something up and then let gravity pull it back down to the magnet. Or have the magnet above pulling something up. Maybe a steel plate above pulling a wheel of magnets up.
When you do not talk to explain, that speaks volumes to me!
Okay so the coil is producing an electric magnetic field? Which pushes the permanent magnets around making it spin? Is that what I'm seeing?
Amazing!!!
Presumably the closer the magnets are to the copper coil, the more electricity is created. Is there a minimal distance electricity is created and a distance where electricity is maximized?
When you use magnets they have stored energy to put into the system the problem with magnets balance at some point they become stable in operation. It's the same problem that you have with shapes it took a very long time to find a shape that wouldn't stay balanced. Would you get useful energy out, though.
Do you have an build list ?
Wow. Channel is BLOWING UP! Happy for you!
Yes! Thank you!
Brilliant man ✌️
My Dad would have built this! Good one bro 👏
How many volts can this run if it was a bit bigger and had the right set up
Nothing free here when considering the energy used to charge the magnets.
How well does it work
Into a load?
This thing is about 20 years old, when UA-cam came around from Google, around the time when these attempts at creating free electricity generators using magnets never got ahead because there couldnt be proven unless a hidden source of given energy, or batteries, was applied to the device that would eventually produce electricity. In other words, a generator driven by a petrol motor. Plenty of those around that genuinely produce electricity, including generators used in construction zones and in power station and dams. Now, after all these years, people still think that magnets can be used to rotate a 'rotor' and produce electricity at the same time. Wow! It never fails to amaze me at how many clickbaits are on UA-cam who think we are stupid sheep who believe in anything shown on this sick social media. Does this mean, we are definitely that stupid, yes/no?
How much power does it generate and what’s the power rate conversion
Is this using the bedini ssg circuitry / wiring schematic?
Could this incorporated with a wind turbine to increase output and reduce resistance?
Excellent work
It looks very pretty
If all you need to do to keep it moving is move the permanent magnet away at the beginning of the loop or V, would a kinetic (gears, etc.) approach work and not require additional electricity?
The energy needed for moving the permanent magnet is equal to the energy of the rotation caused by this movement. Due to losses the rotor would not run with a kinetic approach. Matter of fact, it is the additional electricity which delivers the energy for the rotation. The magnets are just a tool to transform electrical energy in mechanical rotation, but they don't contribute to the energy. This is just a strange e-motor.
What rampage output does this device give? Or volts. Very interesting indeed😍
Somebody tell us what are the current and voltage output ?
I like this. Thank you.
Kako slobodna energija kada se koristi dodatna energija.
no explanation for the wires and coils to work?
Tesla jr....excellent...what can you run with that machine.??
Quisiera saber cuánto voltaje produce y quisiera un poco más explicado lo de la bobina gracias
Es bonito y el vídeo está curado ahora produce electricidad?
Some young enthusiast:
1) hm, cool generator! Pretty expensive, but if I invest in it now, it will give a lot of free energy!
2) assembles the generator
3) well, at least it's a cool toy)
I would like to see what this could do with proper gear driving and clock springs. I do see several potential uses from this device. The one I would like to see is a much larger design then affixed to a gyroscope to stabilize multi-rotor single person aircraft.
I'm wondering if I can get several of these patterns on a longer drive pipe to an alternator and produce electricity
Great idea👍👍👍
If it's a motor, what is it moving? Other than itself?
Would you send a replica to Brazil to be used for high school classes?
Buen trabajo,
Great job.
Yesterday I saw a commercial application from this idea from the infinity sav company, around 3K usd for a 5.5Kw generator; it has a few limitations: the magnets run for 25 years and require some time to reach maximum output, the generator doesn't work in motion (like a car) and takes like 2 minutes to turn on.
Sorry, what you saw is a scam. InfinitySAV is a fraudulent company. They announce sales but they will never sell any machine, since they have no working machine. They only want to rip off gullible investors. This kind of fraud has become quite frequent. I know several companies following this scheme.
were can i get the paper to make it?
Brilliant 🤩
Perfecto. Anula el campo magnético justo en el momento de mayor presión magnética. Funciona.Lo que no se es el consumo de corriente. Y si hay ganancia en potencia o perdidas debido al consumo eléctrico
whent for = a halusination in there?
What is the ratio between electrical input and torque?
Due to losses the mechanical energy output is smaller then the electrical energy input. This is just an e-motor. The magnets are just a tool to transform electrical energy in mechanical rotation, but they don't contribute to the energy.
Tudo é possível,... quando uma única vontade, se torna em várias ferramentas !....
What type & manufacturer of tge magnets?
What are the sizes of the first magnets?
You do all realize the implications this holds even in space, nitro cooling the magnets this could produce a directional flow of energy creating a wave that can be used to both power and direct a shuttle
making a flaw design work takes time, and sometimes longer than finding design with a future. choice is yours boys. - but im def still working on machines. - il post an update soon, got something to blow your socks off.
Why can we not buy one on EBay?
VERAMENTE FANTASTICO,CIAO DA ROMA
I guess the question is, could you get more energy out of this than the battery provides? How much torque is applied? Could you put a beefier generator on it?
No, it's not possible due to that breaking the laws of physics.
Thanks for sharing 👍
Muito bom
Quick observation/question, without any electrical components, coils, etc., why doesn't it continuously spin?
Seems like it should provide free mechanical energy without converting to electricity, and then converting it back.
Can you make one to run a house on it if so how much would that cost
Maior.mais potente eu imagino.
Build a ring around with more stator magnets and coils. Switch them one by one to gain more torque.
@@KevinSmith-os5yz what if an electromagnet placed at appropriate positions and its polarities switched fast enough so that there is attraction and repulsion enabling the cylinder to rotate. The power to this electromagnet can be supplied from a part of the power generated by this machine
@@procash1968 No, Kevin is right. It isn't possible to get it to run itself, because it runs hard up against the laws of thermodynamics. It isn't even possible to achieve unity because of loss to entropy, let alone get more out than you put in, which would violate conservation.
@@KevinSmith-os5yz ok, thanks 👍
Assalamu Alaikum sir can make an strong invention of Nikola Tesla like free energy generator and explain it please
it seems to be the same idea as a magnet accelerator. It needs force to get started, but then can continue in a loop based on the magnetic force.
I'm definitely not as smart as many other people, but there are magnetic accelerators in existence (monorail trains?), and even a lot of videos on UA-cam of people making little 'toys' out of powerful magnets that move an object just based on the magnetic field. They all need that first form of power to start, but then the magnetic fields take over. To me, this seems to be the same idea, but in a loop. The inertia of the motion is able to push the start of the next 'loop'.
Magnetic accelerators exist but you are wrong that they just need power to start. They need power all the time! Also this motor does, the wires you see are connected to a DC source. Which is not shown since the author claims that his motor produces free energy which isn't true at all. Magnets just serve as a tool to transfer electrical power into mechanical power, but they don't contribute to the output power. The whole output power stems from the electrical input and the efficiency of this motor is miserable.
Vou continuar tentando tbm
What's the best type of epoxy to fix magnets at their place?
I'm sure that one of our more experienced minds will have an answer to this. 😊🌎✨
I think it will work logical right
Wonder what it peaked at and rpm
Nice build. But will it move my Go Kart?
Could one spinn a generator with more powerfull magnets?
Is there a plan for this work?
Is that one forsale?
But what are the red and green wires?
Very nice good job.
Better construction for eliminating excess vibration + bigger flywheel might be needed to gain efficiency
if it actually works: then why can we purchase complete kits?
Hello rất hay tuyệt vời nhất chúc mừng bạn thành công
Sáng tạo hay ok
You should replicate the design on the sides of this and the reverse in the center of it for a 6 to 1 power amplification
Ok felicitări ❤❤❤
Can you send me the plans?
So did this work or not?
Well cool!! Do you have an online shop for this kind of stuff? Wouldn't mind some free electric In the long run lol.. although I do like to build :D
He wouldn't risk selling something that doesn't work. Amazon an eBay would have skinned him alive for that
ugh...u do realize this is fake, right?
I do believe a very big system comprised of electromagnets and rare earth magnets combined will be the answer, maybe a long tube of alternating magnets and flywheels at the ends for energy storage and all the electro magnets will have to be timed correctly for the continued push on the hortizontal drum. maybe the entire inside of the cylinder drum is filled with south pole magnets and have a bar in the middle of south pole magnet so the cylinder drum will basically float then have a bigger cylinder around that one that will have the electro magents in or to keep rotational timing.
Feed wires back into device.
Set on glass and give us every angle. Above AND below. No external power source.
Then add just lightbulb socket for proof.
You should sell these for those of us too lazy to hunt for all the parts needed to build it.