Jon Boat Top 10 UPGRADES! Personalize and customize your aluminum boat. Tracker Grizzly Sportsman.
Вставка
- Опубліковано 13 жов 2024
- These are a few of the ways I've modified my boat over the years to make it work better for me.
MinnKota Edge: amzn.to/3RTf02G
BeaverTail Boat Blind: amzn.to/3tSG2iJ
That’s an awesome boat dude I am just getting started on mine a 16 foot 1981 sea nymph with a 1998 40 hp evinrude. I have always had heavier fiberglass center consoles so this is all new to me but I’m looking forward to the whole new experience. Thanks for sharing …
Thanks man. I hope you enjoy your new boat.
That Grip tape is a great idea brother, I love it. LEDs a must as well.
I watched one of your review videos and I didnt comment, but you did a great job painting this boat sir. Nicely done.
Gold wheels look fun as well.
You have done a great job with your build sir. I love what you have done. I would love to buy a gun box, the one I am looking at does not come with one and I have not found one to purchase separately, no rush for the time being, I have not made a purchase yet, still tossing it. Yes sir, I can see needing to move the long stern light somewhere else, especially if it blocks half the versa track.
Those LEds running around the inside of the boat look great as well, do they attract bugs?
Does the boat not come with a motor stabilizer bar? or what ever it is called,?
Thanks for sharing brother, I will, if the Good Lord approves, be posting some on my new rig soon as well. New sub here also brother, Keep up the fun videos.
Dale
Thanks man. I looked at your channel too, pretty cool.
@@BadAtHuntingThank you for the kind words, hopefully be doing some more fishing this year, I have changed a few things around in my life and trying to get set up to be out more often. have a blessed week.
Dale
Thanks for great info. It looked like your bunks do not extend past transom. Make sure they extend 1-2 inches. I didn’t on similar boat and cracked the bottom where transom meets bottom. Lots of vertical load especially when bouncing down rough roads.
Thanks for the feedback.
Nice boat man!
Thanks man, it’s a work in progress still. They’re solid boats though and a good platform to build off of.
Hey buddy. First wanted to say great video. I have a grizzly 1648. I think I bought the same lights for my boat and am about to cut them in. I wanted to ask about your lights you cut in.
Do you think they would work under the water ? Thinking about cutting them in the side of my pods and under the waterline . How are yours holding up? I want to put a few under the waterline.
You might be able to put them below the waterline. I didn’t because I don’t trust my ability to waterproof everything. I also used cheaper led lights.
It could look really good having them on your pods, but I wasn’t sure how I’d run the wiring to them either.
Good luck. I hope it turns out.
Nice video!
Question, what was the deciding factor for tiller vs cc maybe? Curious and looking to make a purchase, mahalo
Thanks man. I wanted a tiller because I like having the open floorplan.
Good info. Thanks, man.
Glad it was helpful!
Looks good! What stern saver did you use, and what did you use to attach it?
I believe the brand name was called “Stern Saver” - and it attaches with a high strength marine glue. It all comes together as a kit, with mounting instructions.
Where did you get the lights for the sides that you cut in?
They are from Amazon. NiLight is the brand I believe.
Thanks for the video dude! I’m looking to buy a 1654 for duck hunting, what’s your take on the motor? How does the 25 treat you and if you could do it again, would you change anything?
Thanks dude!
I like the boat in general. With what you get for the price, it’s a good deal. I’m not sure I’d change anything. The motor is fine- if you’re just using it to get from one place to the next. It tops out at around 25mph, depending on the load. The one thing I might do differently is buy a larger duck blind for it. I bought the beavertail 1600, but I’d probably go for the larger 1700, just to cover more.
Nice job.
Thanks man.
Hey I have the exact same boat and am looking to do some of the same modifications that you have done. I was wonder mainly how you ran your electrical from the trolling motor and lights and what the electrical panel at the back were your turned on your LEDs is called
I ran the wiring for all the electrical along the bottom of the boat next to the factory wiring. There is a channel underneath the flooring where you can put the cables. If you look at it a little bit, you’ll see what I’m talking about.
The panel that controls most of the electrical stuff was there from the factory. I did have to add two switches that I bought off of Amazon, for the led lighting. Those come with a wiring diagram, and weren’t too difficult to instal.
I’m not sure I answered your question right, so if I didn’t - let me know. :)
I’m not sure the exact name of the panel, since it was there from the factory, but as you know there are lots of Switch Panels available online. They all, pretty much, do the same thing.
Do you use the sponsons on the back to reboard your boat when duck hunting shallow or fishing shallow water?
Yes I do, but they say you’re ‘not supposed to.’
They’re welded on pretty strong. My kids, dog, and I use them to get in and out.
Do you have a video on when you painted it? I am thinking of painting my 1648
I started to make a video for it, but painting it was so labor intensive - I gave up trying to record everything. What I can say though is I used stencils from Red Leg Camo (on Amazon). I bought two set of every pattern I liked, in the largest size they had available. I used ultra matte spraypaint. I did one layer of stencil at a time, starting with the biggest blocks of color first, then moving on to the smaller stencils.
Hope that helps. Let me know if you have more questions.
If I ever upgrade to a motor that'll charge my battery, I'll probably add a lot of electronics to mine. But, since I'm starting the motor and running the fish finder on the same deep cycle battery I hesitate to add anything else.
Yeah, you definitely don’t want to overburden your battery, and then have it fail.
I run a smaller boat too, that has a small lithium battery- not connected to the motor. That way if my electronics die, I won’t be stuck.
@@BadAtHunting I run my LED running lights on a small 3.4 amp/hour sealed lead acid battery that I've ran continuously for 9 hours and never ran it down. Those lithium batteries are lighter, but considering the cost and how little I use my lights, it works for me and the weight difference in a small battery like that isn't even noticeable. Now, if I had to carry it that would be different. My little battery sits in a plastic case under the front seat until needed. It hooks up with two spade terminals and is held in place in the bow with some Velcro. I'm all about making things as simple as possible! If I ever do run down my deep cycle battery I can always pull start it. It's just a 25hp Evinrude, so I'm not stranded if it does run down!
Are those rod lockers add on aftermarket and where can I buy them or are they manufacturer installed?
Yes, one side is rod storage, the other side is a gun locker. They came factory installed on the boat. I’m not sure if anyone makes an aftermarket version.
hey bro can you advise the name of the wire clips you used on your boat , and where you found them please ?
Yeah man. I got them on Amazon. You can search ‘Cable Clips’ - the brand I got was XIAOXI. They’ve been working out good for me the last two years. Hope that helps.
Did you paint it your self or did you get it that way ?
I painted it myself.
If you’re interested in seeing how I did it, I’m working on a video now of ‘how to paint camo’. It should come out in the next month.
@@BadAtHunting sound good looking forward to seeing it
I’m looking at this boat what top do you have for it?
If you’re asking about the Bimini- nothing special, just an Amazon find.
The hunting blind (which I’m not sure is in this video) is a beavertail 1600.
Did you install the pods on back? Where did you get them? Thanks Andrew
Fortunately for me I didn’t have to install them, the boat came like that from the factory.
I do know Beavertail makes some that they sell on their website. They even offer different sizes to ensure the proper fit on your boat.
Hope that helps.
What tac did you use?
I can’t remember the name brand, but I bought it off Amazon. It was the highest rated one I could find. I really got it just to keep track of the hours on the motor.
WHERE YOU FIND YOUR TRANSOM SUPPORT
The transom saver for the outboard motor was from Amazon, but I think certain Walmart’s carry them too.
@@BadAtHunting APPRECIATE IT
No problem man. Good luck.
@@BadAtHunting 10-4
Looks like a good vid but can’t handle the music in the background
Thanks for the feedback. This was one of the first videos I ever edited- so I hadn’t figured out the right volume of music to overlay. Hopefully the new ones are better.
@@BadAtHunting don’t get me wrong I wasn’t being negative just hard to watch vid. Nice set up tho.