@@BreachtheBox I understand and that is ok I hope you love where you live . I hope you get to do this in the future too as it is very efficient way to commute
Salut Daniel, super travail et bonne idées. Je fais parti d' une association de vélo en France Dynamo à Nancy .. On n' a réaliser des tall bike, es que tu as des plans ou les dimensions pour les longueurs des cardans et des tubes? j' aimerai en faire un pour nos animations. Cordialement Kristof.
Salut Kristof, Cela samble comme un projet três joli! J'ai utilisé les plans de www.mosquito-velomobiles.com pour la construction de le pilotage de ce velo. Bonne chance avec ton projet!
Great job! Looks like you used crank as the support for the rear wheels, did you use the pedal axle for the wheels? What about the bearings then? Thanks
Thanks! The axles are in the wheels like on a normal bicycle, but they're extra strong (14 mm thick axles) BMX wheels because they are only attached on one side. the crank arms are bolted to a 90 degree metal bracket which the wheel axles are attached to.
Do you have measurements on the steering geometri? Width, height, angulations, how much is the angle of the triangle compared to horizontal? Drawings would basically be helpful..
Brian Kaagaard send them an email and they'll help you out. Not sure if they have made actual plans now, I bought a 3d drawing from them, on which I manually measured the parts
Very cool! Interested to see the fairing
Part 3 please .
Convert it to recumbent low racer and if it goes good you can enclose it
Please
Sorry, didn't continue with it became a bit too complicated and i had to move.
@@BreachtheBox I understand and that is ok I hope you love where you live . I hope you get to do this in the future too as it is very efficient way to commute
Do you know about the "original" flevobike? This bike had lean steering as well, but could be controlled without using your hands!
Cool! I'll check it out, thanks for the tip
This is great stuff!!!!
No welding. Great job!
Interesting concept but cant the advantage of rear wheel steering
Well done sir
Salut Daniel, super travail et bonne idées. Je fais parti d' une association de vélo en France Dynamo à Nancy .. On n' a réaliser des tall bike, es que tu as des plans ou les dimensions pour les longueurs des cardans et des tubes? j' aimerai en faire un pour nos animations. Cordialement Kristof.
Salut Kristof,
Cela samble comme un projet três joli!
J'ai utilisé les plans de www.mosquito-velomobiles.com pour la construction de le pilotage de ce velo. Bonne chance avec ton projet!
Great job! Looks like you used crank as the support for the rear wheels, did you use the pedal axle for the wheels? What about the bearings then? Thanks
Thanks! The axles are in the wheels like on a normal bicycle, but they're extra strong (14 mm thick axles) BMX wheels because they are only attached on one side. the crank arms are bolted to a 90 degree metal bracket which the wheel axles are attached to.
Did the next video get pulled? I can't find it on your channel
Hey! i have been busy with other projects, so i haven't finished it yet :)
What's the song at the end?
It's a song one of the bands i played in wrote. We never managed to record it professionally unfortunately, so that is the best recording we have
from an original design creative common mosquito-velomobiles.com, (actually not a rear steering at all)
Do you have measurements on the steering geometri? Width, height, angulations, how much is the angle of the triangle compared to horizontal? Drawings would basically be helpful..
Brian Kaagaard The steering system dimensions are based off plans from Mosquito-velomobiles.com, you get get them there if you're interested
I can't seem to find any... thats why I asked you.
Brian Kaagaard send them an email and they'll help you out. Not sure if they have made actual plans now, I bought a 3d drawing from them, on which I manually measured the parts
@@briankaagaard971 Hello. I can't find dimensions neither. Did you find something ?
Did you try sending them an email?
any update?
👍 waiting for fairing, sub-ed
Those were mums chairs
Haha!
Ben je Nederlands?
Ik ben in Nederland opgegroeid
When are you gonna upload the next video of this project?
Необычный подход