How to Replace Rear Driver's Side Caliper 07-14 Ford Edge
Вставка
- Опубліковано 5 гру 2019
- Buy Now!
New Brake Caliper from 1AAuto.com 1aau.to/ia/1ABCR00107
A worn out or seized brake caliper can create dangerous and expensive problems: overheating, rotor and pad wear, or even total failure. TRQ brake calipers are engineered to fit your specific vehicle. This video shows you how to a rear brake caliper on your 2007-14 Ford Edge.
• Check here for more videos on the 2007-14 Ford Edge: • Ford Edge 2007-2014 1s...
This process should be similar on the following vehicles:
2007 Ford Edge
2008 Ford Edge
2009 Ford Edge
2010 Ford Edge
2011 Ford Edge
2012 Ford Edge
2013 Ford Edge
2014 Ford Edge
Tools you will need:
• 11mm Wrench 1aau.to/oa/1AXAA00010
• 10mm Socket 1aau.to/oa/1AXAA00017
• 12mm Socket 1aau.to/oa/1AXAA00015
• 15mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• Hose Pinch-Off Pliers
• Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXAA00252
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Fluid
• Brake Grease
• Gloves 1aau.to/oa/1AXSS00048
• Safety Glasses 1aau.to/oa/1AXAA00343
• Drain Pan 1aau.to/oa/1AXAA00320
• Funnel 1aau.to/oa/1AXAA00310
Subscribe: / @trq
Check out our playlist:
Ford Edge 2007-2014 1st Gen: • Ford Edge 2007-2014 1s...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I love these videos. These must be California/Arizona edges. Everything comes off so easily! No rust, no salt, nice!
Just messing around, these videos are awesome. Right to the point.
Also for anyone having a hard time getting the round vibration dampeners off (the round grey thing attached to the bolt opposite of the slider pin).
Just pop the orange cap off and theres a torx bit. Use a T30 torx and itll screw right off. Mine were basically rusted onto the bolt, lol.
I could never get them off with pliers/vice grips, it just eats it up.
Comes off like nothing with the torx.
I wish all auto repair videos were as clear and to the point as this was. Great Job! great camera work showing everything as well.
Thank You!
One of the most clear, detailed, well filmed videos I have seen and I have watched a ton and replaced my own calipers before. The only concern I have is letting the corrosive brake fluid spurt all over the place, including possibly getting on the new pads or hoses, etc. The quick spray at the end would leave me wondering if I had brake fluid somewhere. If you connect a clear hose to the bleeder, you can see the bubbles come out and you only spill a few ounces, which you can catch with a cloth around the hose. Otherwise, awesome, clear video, description and presentation.
what is the name of the tool to take the emergency brake line off?? trying to google it and im having no luck
E brake line removing tool name please! I've seen a couple of videos with this tool that you've used and you still haven't mentioned the name. Would you mind mentioning the name. Thank you.
Great video but... at 5:08 in the video the rear caliper bracket mounting bolts are being torqued to 98 ft-lbs. The Haynes Repair Manual has the rear torque specification at 66 ft-lbs for 2018 models and earlier. Would someone kindly clarify. Thanks!!!
Fantastic video! That was the most professionally made and thought through video I've ever watch for this video. Definitely keep these coming!
+Matt Bauer Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
thank you sooo much for helping me replacing brake rotors/pads through these video guides. it takes time for me to do it, but it’s done perfectly. the way you lift the tire seems like 5lbs only.😎 nice vids. again thanks thanks thanks.. or shall i say torque👍🏼👍🏼👍🏼
I guess I’d put a hose on the bleeder so fluid doesn’t get all over the new pads and rotor.
What was the spray used to clean up the caliper
Good morning
How do you call the tool you used to take cable out
Thank you
If the normal bleed method does not work that is because you would need to press the emergency brake lever and release it 5x while holding down the brake pedal. So, pump 5x, open bleeder valve, close bleeder valve, press emergency brake 5x while still holding down the brake, then release brake.
Great videos my friend. Just did rear brakes and calipers on my niece's 2012 Edge, but one of the calipers (while torqued) still has a bit of play at the slider pins when you rock it back and forth, which is causing a noise under braking. is this fixable or could it be a sign of a bad fitting caliper to bracket? Thinking we need to exchange it for another but wanted to ask first. Many thanks!
Great video!
Great video.