I installed the fan this morning. Tool Review Zone video was completely accurate. I used the video to assist me through each step of assembly and installation. I never even read the included paper instructions. I'm very pleased with the look and operation of this light/fan. Thanks for the helpful video!!!
Thank you Sir. I have one in my living room blowing nice cool air down. The one in my bedroom was blowing the air up. Thanks for pointing ourt the "reverse flow" switch. You are the best!!!
Thank you so much for this video!!!! You saved us a lot of time. We got hung up with the extra collar (that you show at the end). We had it coupled with the other collar so it looked like a ball but then of course we couldn't put the downrod into the bracket. I looked for a video and it was HELPFUL! Thanks a million!
@@ToolReviewZone I know this UA-cam video was uploaded three years ago but, have you ever thought of putting an exhaust fan in your kitchen to suck the air outside? (That way your alarms will not be constantly going off!) 👍🏻
If you wish to use the decorative arms, then the arm support cover cannot be used unless a longer down rod (at least 8”) is purchased. Keep in mind that the longer the down rod, the chance of fan wobble increases.
So my uncle installed one in me and my brothers room, it’s a windara 22” LED drum ceiling fan. Fan is great and a good amount of light but the fan doesn’t cut off nor the light with the control. Now the fan is stuck on and can’t turn it off unless I turn the whole light off. So if I want the fan working the light comes on. The control works as it shows the red light when I click the button but for some reason doesn’t do anything to the fan or light minus the very first use ever, after that nothing
+Angela A Thanks for the comment. There are screws on bottom of the fan that you will need to remove. The first set hole in the decorative grill, and a set that hold oin the fan guard. You will need to remove the decorative caps that keep the screws hidden first to get to them. This is not the easiest fan to clean, but that is how you would do it
I'm curious.....I have the traditional 5 blade ceiling fans....while this new style looks really nice, how do you clean the blades? I need to wipe my down every month because they are dust magnets and I only see these enclosed fans need to be dismantled to clean? How do you clean them?
Thank you for this video. We are looking at swapping out the lights in our bedrooms for ceiling fans like this one. However when we were doing research at installing fans we learned we needed to put some sort of brace/bracket in the ceiling/attic- do we need to do that for this type of fan?
Thanks for the lovely video. Any updates on how it has been working, any problems that you may have seen after using it? Also can just the lights be switched on/off without using the fan ?
I have the fan,and love it.I can't figure out why the blades moves clockwise to get the breeze,and yet all my other fans move counter clockwise for the breeze.
man. this thing would be perfect for down in the basement, wouldnt have to worry bout hitting the blades because of the cover, if it had a daylight light it would be on my shopping list. unfortunately my basement lights are all daylight led and I think the soft white would stick out like a sore thumb :(
Hello. This fan looks great. I want to know can the fan be mounted kind of flush without the rod? I want to hang a projector in my media room and need to find something that won’t block the projector from projecting to the projector screen.
+Jerry Howard thanks for the comment. I love this fan and actually placed another in the house. I don't really think that you could mount it flush/without the included hardware though. That being said, it does sit close to the ceiling as it is
Thx for posting this awesome video. I've been looking for a solution for my wife's dressing / make up room. I like that there aren't any exposed blades. I'm having a hard time seeing if the light level is high or on the lower side ( understanding it's dimmable). Is there a wattage rating for the lights, missed it if there was. Cheers
Hi Bruce, Can't recall what the wattage is, but can't be much more than your standard ceiling fan. The lights actually dim very low, and the fan setting also has a very slow setting if needed. Hope this helps, and thanks for the comment!
I have the same style original light as you had and I bought this very fan to replace the light. The current support box in my ceiling is plastic but the directions say to have a metal box installed for maximum support. Was your support box plastic as well? If so, do you recommend swapping it out for a metal one? I already purchase one but not sure how much trouble it's going to be to replace it. Thanks!
Hi Darrell, here are my thoughts on this. This fan is rather light, and does not put the strain on the box like a fan with larger blades would. There is also no swaying of the fan even when set to high. Would I go through all the trouble to replace the box for this fan.... no. That being said, I also like to go by what the manufacturer suggests. All in all, it would be your call, but I personally would not change it
Ok. Those were my thoughts too but was skeptical due to the manufacturer's recommendations. If yours is plastic and you haven't had any issues I don't see any reason to change mine either. Thanks again!
Hi, I was going to buy this last week from Home Depot but there were no reviews. I went back to just take the jump and buy it today and it says no longer available :( I might have missed this in the video but did you buy this from Home Depot or another retailer? After using it for a bit do you think the sound would be bothersome if watching TV and it is located in a living room? Thank you.
Hi Doc, I just reached out to the manufacturer of this to see when they will have it posted on the Depot site as this is where they will be selling it. They should be back in stock soon as they are trying to get this line going. As for noise, you will hear absolutely nothing if it is on low, maybe a bit of air flow on medium. If you have it on high, you will definitely hear it while trying to watch tv, but even the most quiet fans will still make sound as the air flow it's producing it what you are hearing. Long story short, this will be fine in the living room, just don't put it on high while watching tv
Installed the fan and I am having a problem with both light and fan randomly turning off and on as if some one is playing with the switch. Replaced the remote device in the fan and still does the same thing. Hooked it up directly to power and fan at high speed as well light so it is not my power. Getting frustrated on why it randomly turns off and on. Any suggestions out there as it is on a three way but not on a three way dimmer switch as I know that doesn’t work. Ready to remove it.
@@km3096 I'm considering buying one of these fans, I was wondering now that you have one how you find the sound of the fan, and do you find the lights bright enough that it doesn't strain your eyes?
I have tried installing two of these fans, tried both fans with the dimmer switch included and the other fans dimmer switch, but no matter what I do when the light is on the dimmer receiver makes a noise. In addition when I try to dim the lights they blink. HELP!!!
+Douglas Gray I actually forgot to mention in the video, but this has a built in summer. All you need to do is press and hold down the light button in the remote, and it will cycle through bright and dim on its own
I am considering using this fan in my dining room that I am renovating - but it the room also needs to be rewired - that is why I am wondering if the switch on the wall can be a dimmer switch for fans rather than using the remote. My wife doesn't want to stick the thing to the wall, and we always lose remotes -
+Douglas Gray I would tginkbthatvyoi would be able to add a dimmer to this without any issues. You could always give them a call to make sure, but I would say yeah
Stay away from this company. They aren’t shipping their fans. I’ve been waiting for 5 months. No refund or fan. Check out BBB.org and read the multiple complaints.
Can more than one fan be installed in a home without interference between the remote controls? What other home electronics might interfere with the Remotes?
The instructions say, "Verify the DIP switches on the receiver and the remote control are both in the same configuration. NOTE: The switches can be adjusted as needed to avoid possible interference with other remote units in your home, but always make sure that the same configuration is set on both the remote and the receiver." If you have interference after installation look like you have to take the whole thing apart to change the dip switches. Not good!
Running into this problem now. Everything is connected the fan won’t work without the light. No way I could either turn on the light or the fan. It’s all together
Tool Review Zone it’s not defective. Finally found someone’s comment that the brightness can be adjusted by holding down the light button on the remote. Problem solved!
+Cynthia De Zee , I just reached out to the manufacturer about this issue, and it seems that they are currently out of stock due to high demand for this light/fan. They should be stocking these again soon, just keep an eye out on the HD site.
I feelike you fixed the problem with your wife cooking all that terrible food for you with that one comment about her cooking... You didn't even need to buy the fan. 😁
I found the video from Stile to be a little bit more concise. ua-cam.com/video/Gf3l-qV-btw/v-deo.html Also did yo mention about checking if the outlet box ( which should not be plastic) is securely fastened to a ceiling joist to be able to support the light/fan weight ?
@@ToolReviewZone I've had it for about a month and it's awesome. I love the light. The fan is good when in medium but a bit noisy. High is like standing in front of a propeller plane lol
I installed the fan this morning. Tool Review Zone video was completely accurate. I used the video to assist me through each step of assembly and installation. I never even read the included paper instructions. I'm very pleased with the look and operation of this light/fan. Thanks for the helpful video!!!
AWESOME MIKE!!! Thanks so much for the feedback my friend 👊👊👊👊
Thank you Sir. I have one in my living room blowing nice cool air down. The one in my bedroom was blowing the air up. Thanks for pointing ourt the "reverse flow" switch. You are the best!!!
Thank you so much for this video!!!! You saved us a lot of time. We got hung up with the extra collar (that you show at the end). We had it coupled with the other collar so it looked like a ball but then of course we couldn't put the downrod into the bracket. I looked for a video and it was HELPFUL! Thanks a million!
Your very welcome!
@@ToolReviewZone I know this UA-cam video was uploaded three years ago but, have you ever thought of putting an exhaust fan in your kitchen to suck the air outside? (That way your alarms will not be constantly going off!) 👍🏻
I just ordered this fan in the bronze finish this morning from HD.
Finally a ceiling fan with a protective guard!
Man! Your video saved me 90 bucks today! Thank you.
If you wish to use the decorative arms, then the arm support cover cannot be used unless a longer down rod (at least 8”) is purchased. Keep in mind that the longer the down rod, the chance of fan wobble increases.
And this fan is safer in a room with a bunk bed. Much safer then a conventional fan.
Do you have any idea how to clean it ?
Dude thank you so much for this video absolutely stellar man
Shopping around for a fan and this was different and cool option thanks👍👍
So my uncle installed one in me and my brothers room, it’s a windara 22” LED drum ceiling fan. Fan is great and a good amount of light but the fan doesn’t cut off nor the light with the control. Now the fan is stuck on and can’t turn it off unless I turn the whole light off. So if I want the fan working the light comes on. The control works as it shows the red light when I click the button but for some reason doesn’t do anything to the fan or light minus the very first use ever, after that nothing
Is there a way to change the bubs inside because the light is not very bright inside the house
Press and hold the light button to adjust the brightness
Did u figure it out
@@ismaragiselle2959 nope. but i actually moved out if that house so not an issue anymore
Nice Video. Very Helpful and appreciate you being so thorough!
Thanks Scott, very much appreciate the comment, and glad it helped!
Awesome installation tutorial man. Thank you so much.
You got it Kevin👊
How do you clean this? I can see there being a build up of dust after a while.
+Angela A Thanks for the comment. There are screws on bottom of the fan that you will need to remove. The first set hole in the decorative grill, and a set that hold oin the fan guard. You will need to remove the decorative caps that keep the screws hidden first to get to them. This is not the easiest fan to clean, but that is how you would do it
Thank you very much for your quick response!!Great video!
I got one to got it today and I probley have the same problem with mine
How do you change the bulbs
this video was uploaded 6yrs ago. How did your long term use fair? Can you clean the blades easily when they get dusty?
I'm I missing something here? I have the fan fully assembled and I don't have enough clearance on the down rod to hang the fan assembled
Nice fan. But the light is too dim for me. Is changing the leds intuitive? I would like to change them to a brighter lumen.
I'm curious.....I have the traditional 5 blade ceiling fans....while
this new style looks really nice, how do you clean the blades? I need to
wipe my down every month because they are dust magnets and I only see
these enclosed fans need to be dismantled to clean? How do you clean
them?
I can't hang on bracket with the 3 feet things on but if there not in place you can't put them in after it's hung. Very frustrating.
Thank for you video because I use it to assembly and it was so easy 👍👍
We ran into a problem. I can’t get either the fan to work without the light and the light to work without the fan.
Silly question, can you still use the light switch or only by remote? Thank you
Do you think it hangs too low?? Do you have to have use the decorative arms??? Could you cut the downrod down to shorten the height of the fan??
Once installed how far does it hang down from the ceiling?
I measured at Home Depot - it was 17 inches but they state 15” on the box
How do you clean the blades down the road? Nice but how involved is cleaning it?
Thank you for this video. We are looking at swapping out the lights in our bedrooms for ceiling fans like this one. However when we were doing research at installing fans we learned we needed to put some sort of brace/bracket in the ceiling/attic- do we need to do that for this type of fan?
How wide is the base where it screws into the ceiling? I have a 6" beam I would like to mount this on and cannot find the info anywhere
Your going to be close ninten. The base is about 6 to 7 inches wide.
Thank you for getting back to me so quickly! Ended up ordering it cause it was a 7" beam in the end. and yep, it was close lol.
No e. Glad it worked out bud
Any suggestions of what type of lightbulbs to use for brighter lights?
This fan is too dim...
Led lights are flickering. Anyone here had the same problem and how did you fixed it?
Sorry I don't have a solution but mine is doing the same. Can't find answers anywhere.
My light is low and has a flickering to it ..can we replace light and how?
Thanks for the lovely video. Any updates on how it has been working, any problems that you may have seen after using it? Also can just the lights be switched on/off without using the fan ?
Its been great! No issues at all!
Awesome. Can you use the light switch or only the remote? Thanks
I have the fan,and love it.I can't figure out why the blades moves clockwise to get the breeze,and yet all my other fans move counter clockwise for the breeze.
Hmmm, that is strange? Could it be because of how close it is to the ceiling maybe?
How you clean this fan? I’ve tried and it’s quite difficult
How far does it hang down from the ceiling?
I notice that on dim the light flickers a bit. Maybe I'm in an apartment that something is awry with the wiring in the wall?
Hi Jon. I have bot had any issues like that, and I crank mine on hi all the time. May want to check that out buddy
Adjust the brightness and problem should be solved.
Press and hold the light button to adjust the brightness
man. this thing would be perfect for down in the basement, wouldnt have to worry bout hitting the blades because of the cover, if it had a daylight light it would be on my shopping list. unfortunately my basement lights are all daylight led and I think the soft white would stick out like a sore thumb :(
Does anyone knows if the light are starting to go out how to replace/fix them?
Does this fan not require a ceiling fan bracket on the J Box?
Can the lights be changed to a day light color ?
I have the same question!
Cristal Lugo press and hold the light button and it changes the brightness! 🤯🤯🤯🤯🤯
How would I install this on an angled ceiling
I assume the fan can operate with the light off?
Yess
Does it blow air throughout the room or just below the lamp?
Hello. This fan looks great. I want to know can the fan be mounted kind of flush without the rod? I want to hang a projector in my media room and need to find something that won’t block the projector from projecting to the projector screen.
+Jerry Howard thanks for the comment. I love this fan and actually placed another in the house. I don't really think that you could mount it flush/without the included hardware though. That being said, it does sit close to the ceiling as it is
Thx for posting this awesome video. I've been looking for a solution for my wife's dressing / make up room. I like that there aren't any exposed blades. I'm having a hard time seeing if the light level is high or on the lower side ( understanding it's dimmable). Is there a wattage rating for the lights, missed it if there was. Cheers
Hi Bruce,
Can't recall what the wattage is, but can't be much more than your standard ceiling fan. The lights actually dim very low, and the fan setting also has a very slow setting if needed. Hope this helps, and thanks for the comment!
How do you change the bulbs
What is the remote control setup?? Not a single installation video about this fan has that step.
How do you clean the blades?
Any idea how to clean this fan?
hit it with some compressed air in a can
how do you clean those blades tho?
Is the fan loud. I want it in my very small kitchen. The microwave hood fan is very loud even on low.
On high iys a bit noisy, but low and medium are nice
I have the same style original light as you had and I bought this very fan to replace the light. The current support box in my ceiling is plastic but the directions say to have a metal box installed for maximum support. Was your support box plastic as well? If so, do you recommend swapping it out for a metal one? I already purchase one but not sure how much trouble it's going to be to replace it. Thanks!
Hi Darrell, here are my thoughts on this. This fan is rather light, and does not put the strain on the box like a fan with larger blades would. There is also no swaying of the fan even when set to high. Would I go through all the trouble to replace the box for this fan.... no. That being said, I also like to go by what the manufacturer suggests. All in all, it would be your call, but I personally would not change it
Ok. Those were my thoughts too but was skeptical due to the manufacturer's recommendations. If yours is plastic and you haven't had any issues I don't see any reason to change mine either. Thanks again!
Hi, I was going to buy this last week from Home Depot but there were no
reviews. I went back to just take the jump and buy it today and it says
no longer available :( I might have missed this in the video but did
you buy this from Home Depot or another retailer? After using it for a
bit do you think the sound would be bothersome if watching TV and it is
located in a living room? Thank you.
Hi Doc,
I just reached out to the manufacturer of this to see when they will have it posted on the Depot site as this is where they will be selling it. They should be back in stock soon as they are trying to get this line going.
As for noise, you will hear absolutely nothing if it is on low, maybe a bit of air flow on medium. If you have it on high, you will definitely hear it while trying to watch tv, but even the most quiet fans will still make sound as the air flow it's producing it what you are hearing.
Long story short, this will be fine in the living room, just don't put it on high while watching tv
+J.DOC www.homedepot.com/p/Stile-Anderson-22-in-Indoor-Outdoor-Brushed-Nickel-Ceiling-Fan-CF0110/301919991
Fyi, they are now on the site
Thank you for your reply and the heads up.
Installed the fan and I am having a problem with both light and fan randomly turning off and on as if some one is playing with the switch. Replaced the remote device in the fan and still does the same thing. Hooked it up directly to power and fan at high speed as well light so it is not my power. Getting frustrated on why it randomly turns off and on. Any suggestions out there as it is on a three way but not on a three way dimmer switch as I know that doesn’t work. Ready to remove it.
i have the same issue :( i was able to fix the flickering by pressing down the light button, but now i can't use the fan lol
If you hold the light button the light will fade to the dimness you desire. You fail to mention and show it in the video
How quite is the fan. I want it on in my bedroom while I sleep.
Very quiet on low, not bad on medium and loud on high
@@ToolReviewZone I ordered one. Thank you for the reply
@@km3096 I'm considering buying one of these fans, I was wondering now that you have one how you find the sound of the fan, and do you find the lights bright enough that it doesn't strain your eyes?
Kevin Miller how did this work for you in the bedroom? Does your bed have to be right underneath it or do you feel the breeze everywhere in the room?
How can I change the LED lights?
I have the same question!
Says 50,000 hours of light, no replacement for LEDs that I've found.
Press and hold the light button to adjust the brightness
Is there a way to change bulbs
Is there anyway to brighten light and how do you replace lightbulbs
There should be a remote that allows you to adjust the brightness. Not sure if you can change the bulbs in this 🤔
Is there any way to make this a white lights instead of the yellow color it has?
Daylight instead of the white Ligth.?
I have tried installing two of these fans, tried both fans with the dimmer switch included and the other fans dimmer switch, but no matter what I do when the light is on the dimmer receiver makes a noise. In addition when I try to dim the lights they blink. HELP!!!
Man, I'm not sure what is going on there Joshua. I would say that maybe you got a bad one, but you said you tried two.
Mine is flickering too when dimmed
how would you change the light bulb
Press and hold the light button to adjust the brightness
Ca you use a dimmer switch on the wall to turn the light/fan on and off?
+Douglas Gray I actually forgot to mention in the video, but this has a built in summer. All you need to do is press and hold down the light button in the remote, and it will cycle through bright and dim on its own
I am considering using this fan in my dining room that I am renovating - but it the room also needs to be rewired - that is why I am wondering if the switch on the wall can be a dimmer switch for fans rather than using the remote. My wife doesn't want to stick the thing to the wall, and we always lose remotes -
+Douglas Gray I would tginkbthatvyoi would be able to add a dimmer to this without any issues. You could always give them a call to make sure, but I would say yeah
I just got one and it doesn’t stop flickering
Yeah that's not right Nick. Could be a loose wire. Check the connections again and take it back if that doesn't work
we had same problem, loose wires were the issue.
LEDs are supposed to last forever but I had to change one about a year in
Stay away from this company. They aren’t shipping their fans. I’ve been waiting for 5 months. No refund or fan. Check out BBB.org and read the multiple complaints.
Can more than one fan be installed in a home without interference between the remote controls? What other home electronics might interfere with the Remotes?
That's a good question. You can change the frequency, so won't have an issue. It was turning on other fans in the house until I fixed the issue
How do you change frequency, I presume you mean each remote.
Yes sir, it been a while, but believe it was on the remote
The instructions say, "Verify the DIP switches on the receiver and the remote control are both in the same configuration.
NOTE: The switches can be adjusted as needed to avoid possible interference with other remote units in your home, but always make sure that the same configuration is set on both the remote and the receiver." If you have interference after installation look like you have to take the whole thing apart to change the dip switches. Not good!
Does your wall switch control on/off? I have this connected and it will not turn on/off with the main power wall switch.
It wont work with mine either EJ. Not real happy about that
Running into this problem now. Everything is connected the fan won’t work without the light. No way I could either turn on the light or the fan. It’s all together
We’ve had this light about 4 months. Now the light is flickering. Is it serviceable?
You should have a warranty on it. Ide take it back to the Depot as it sounds like you got a bad one. Either that, or the wires are loose
Tool Review Zone it’s not defective. Finally found someone’s comment that the brightness can be adjusted by holding down the light button on the remote. Problem solved!
Tool Review Zone but thank you for your reply
I'm looking for this fan, but in another finish/color and it's not on The Home Depot website. I tried your links, but it says Page Not Found. :(
It seems to be that they have removed it from the Home Depot Site. I will see what I can find out this week and let you know.
+Cynthia De Zee , I just reached out to the manufacturer about this issue, and it seems that they are currently out of stock due to high demand for this light/fan. They should be stocking these again soon, just keep an eye out on the HD site.
What is the height from ring to bottom of the fan? Thanks
Ceiling
What's the price please
Nicholas V. Anderson I paid $174 in Home Depot on sale
I have one but now I can’t figure out how to clean it and it is disgusting
I feelike you fixed the problem with your wife cooking all that terrible food for you with that one comment about her cooking... You didn't even need to buy the fan. 😁
Lol you are right
How do you clean it????
You could blow it out if you needed to
How do you dim the light?
Just press and hold down the light button
@@ToolReviewZone Thanks!!
Tool Review Zone finally!!!! Thank you!
Lol, you got it👊
I found the video from Stile to be a little bit more concise.
ua-cam.com/video/Gf3l-qV-btw/v-deo.html
Also did yo mention about checking if the outlet box ( which should not be plastic) is securely fastened to a ceiling joist to be able to support the light/fan weight ?
You have to be from Pittsburgh with that accent.
Born and raised buddy
@@ToolReviewZone Ever tried The Pirmanti Bros. Sandwiches?
Form I can buy it?
Muzammil ali Home Depot
How much for the instalación?
Not sure bravo. I put this up myself, but sure you could probably find a handyman to do it
I just bought one lol
Dude how do you like it. I love mine
@@ToolReviewZone I've had it for about a month and it's awesome. I love the light. The fan is good when in medium but a bit noisy. High is like standing in front of a propeller plane lol
Yeah, toss that bad boy on high and it starts humming. I love it though buddy
Nice way to skip steps.
Just a ugly fan. I'm sure it works but it's just ugly
Too quick